AZ954X-1C-3DM Datasheet PDF - ETC
| Part Number | AZ954X-1C-3DM | |
| Description | SUBMINIATURE POWER RELAY | |
| Manufacturers | ETC | |
| Logo |  |
|
|
There is a preview and AZ954X-1C-3DM download ( pdf file ) link at the bottom of this page. Total 2 Pages | ||
Preview 1 page No Preview Available !
AZ954
SUBMINIATURE
POWER RELAY
FEATURES
• Subminiature size for high density packaging
• Coil sensitivity to 114 mW
• Extremely low cost
• Coils to 24 VDC
• Epoxy sealed for automatic wave soldering
• 2 Amp contacts
• Class B and F insulation available
• Life expectancy to 10 million operations
• UL, CUR file E43203
CONTACTS
Arrangement SPDT (1 Form C)
Ratings
Light Duty
Medium Duty
Material
Resistive load:
Max. switched power: 30 W or 125 VA
Max. switched current: 1 A
Max. switched voltage: 150 VDC* or 300 VAC
UL Rating: 1 A at 125 VAC General Use
1 A at 30 VDC Resistive
Max. switched power: 30 W or 250 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC* or 300 VAC
UL Rating: 2 A at 125 VAC General Use
1 A at 30 VDC Resistive.
Silver alloy
Resistance
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max Continuous
Dissipation
Temperature Rise
Max. Temperature
0.45W coil: 253 mW
0.36W coil: 203 mW
0.2W coil: 114 mw
0.8 W at 20°C (68°F) ambient
0.6 W at 40°C (104°F) ambient
At nominal coil voltage:
0.45W: 54°C (97°F)
0.36W: 44°C (79°F)
0.2W: 30°C (54°F)
105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at rated load
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 1 ms at nominal coil voltage
(with no coil suppressions)
Dielectric Strength
1250 Vrms coil to contact
(at sea level for 1 min.) 750 Vrms between open contacts
Insulation Resistance 100 megohms min. at 20°C, 500 VDC
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
0.45W: -25°C (-13°F) to 55°C (131°F)
0.36W: -25°C (-13°F) to 65°C (167°F)
0.2W: -25°C (-13°F) to 75°C (167°F)
-25°C (-13°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55Hz
Shock
15 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
3.5 grams
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected]
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000-06-06
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AZ954X-1C-3DM electronic component. |
| Information | Total 2 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ AZ954X-1C-3DM.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| AZ954X-1C-3D | The function is SUBMINIATURE POWER RELAY. ETC | |
| AZ954X-1C-3DM | The function is SUBMINIATURE POWER RELAY. ETC | |
| AZ954X-1C-3DS | The function is SUBMINIATURE POWER RELAY. ETC | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AZ95
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||