DataSheet.jp

EWS1205 の電気的特性と機能

EWS1205のメーカーはPower-Oneです、この部品の機能は「EWS SERIES 5 WATT」です。


製品の詳細 ( Datasheet PDF )

部品番号 EWS1205
部品説明 EWS SERIES 5 WATT
メーカ Power-One
ロゴ Power-One ロゴ 




このページの下部にプレビューとEWS1205ダウンロード(pdfファイル)リンクがあります。
Total 3 pages

No Preview Available !

EWS1205 Datasheet, EWS1205 PDF,ピン配置, 機能
EWS SERIES
5 WATT
FEATURES
• Industry Standard
• 5V and 12V Inputs
Package
• Input Pi Filter and
• Industry Standard Pinout 6-Sided Shielding
• 85°C Case Operation • Regulated Outputs
• Short Circuit Protection • 500V Isolation
TECHNICAL SPECIFICATIONS
Voltage Range
5 VDC Nominal
12 VDC Nominal
Reflected Ripple
Reverse Input Current
Input
4.5 - 9 VDC
9 - 18 VDC
20% Iin Max.
100% Iin Max.
Output
Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Temperature Coefficient
Ripple And Noise, 20 MHz BW
Short Circuit Protection 1
Current Limit
±5%
±1.5% Vout
±2.5% Vout
10%
25% Iout
1% Vout
500 µs
0.02%/°C
150 mV
Continuous
130%
DESCRIPTION
EWS DC/DC converters offer excellent
regulation and isolation in an industry standard
package. Available in 5V or 12V input versions,
the EWS is ideal for industrial, datacom, or
telecom applications. The EWS features short
circuit protection, six-sided shielding, and 500
VDC isolation. Please see the EWD series for
dual output applications.
Efficiency vs. Load (12V Input)
90
85
80
75
70
65
EFF. EWS1212
60
55 EFF. EWS1215
50
45
10 20 30 40 50 60 70 80 90 10
LOAD %
General
Switching Frequency
Isolation
Input - Output
Isolation Resistance - Input to Output
Standard Case Operating Range
Storage range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
Safety
Weight (approx.)
200 kHz
500 VDC
109 Ohms
-25 to +85°C
-40 to +125°C
95%
5 g, 10 - 55 Hz
UL, cUL, TUV
1.4 oz.
Notes
1 Converter will auto-restart once fault has been removed.
Specifications typically at 25°C, normal line, and full load, unless
otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully
compatible with commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please
consult factory for specific model information.
1

1 Page





EWS1205 pdf, ピン配列
OPTIONS
Powering Communications and Technology
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and
add them to the model number. Example ordering options are located below the options table.
OPTIONS
Negative Logic
Lucent Compatible Trim
Terminal Strip
Trim
Enable
Trim and Enable
Current Share
Headerless
PIN LENGTH AND HEATSINK
OPTIONS
0.110" (2.8mm) Pin Length
0.150" (3.8mm) Pin Length
0.24" (6.1mm) Horizontal Heatsink
0.24" (6.1mm) Vertical Heatsink
0.45" (11.4mm) Horizontal Heatsink
0.45" (11.4mm) Vertical Heatsink
0.95" (24.1mm) Horizontal Heatsink
0.95" (24.1mm) Vertical Heatsink
SUFFIX
N
T
APPLICABLE SERIES
REMARKS
HAS, HBD, HBS, HES, HLS, LES,
TTL "Low" Turns Module ON
QBS, QES, QLS, TES, TQD
TTL "High" Turns Module OFF
HAS, HBD, HBS, HES, HLS, QBS, QES,
QLS
TS XWS, XWD, XWT
1 IAS, LES
2 IAD, IAS, LES, SMS
3 IAS, LES
4 SMS
Y Encapsulated EWS, IWS, OWS
Standard Pin Length is 0.180"
(4.6mm)
8 All Units (Except SMS)
9 All Units (Except SMS)
All Units (Except DIP, HLS, HLD, QLS,
1H SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
1V SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
2H SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
2V SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
3H SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
3V SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
Example Options:
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems, equipment used
in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manu-
factured. Specifications are subject to change without notice.
3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ EWS1205 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
EWS1205

EWS SERIES 5 WATT

Power-One
Power-One


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap