DataSheet.jp

FAN2519 の電気的特性と機能

FAN2519のメーカーはFairchild Semiconductorです、この部品の機能は「50 mA CMOS LDO Regulators with Fast Start Enable」です。


製品の詳細 ( Datasheet PDF )

部品番号 FAN2519
部品説明 50 mA CMOS LDO Regulators with Fast Start Enable
メーカ Fairchild Semiconductor
ロゴ Fairchild Semiconductor ロゴ 




このページの下部にプレビューとFAN2519ダウンロード(pdfファイル)リンクがあります。

Total 10 pages

No Preview Available !

FAN2519 Datasheet, FAN2519 PDF,ピン配置, 機能
www.fairchildsemi.com
FAN2518, FAN2519
50 mA CMOS LDO Regulators with Fast Start Enable
Features
• Ultra Low Power Consumption
• Enable optimized for CDMA time phases
• 50 mV dropout voltage at 50 mA
• 25 µA ground current at 50 mA
• Enable/Shutdown Control
• SOT23-5 package
• Thermal limiting
• 300 mA peak current
wide variety of external capacitors, and the compact SOT23-5
surface-mount package. In addition, the FAN2518/19 family
offer the fast power-cycle time required in CDMA handset
applications. These products offer significant improvements
over older BiCMOS designs and are pin-compatible with
many popular devices. The output is thermally protected
against overload.
The FAN2518 and FAN2519 devices are distinguished by
the assignment of pin 4:
Applications
• Cellular Phones and accessories
• PDAs
• Portable cameras and video recorders
• Laptop, notebook and palmtop computers
Description
The FAN2518/19 family of micropower low-dropout voltage
regulators utilize CMOS technology to offer a new level of
cost-effective performance in GSM, TDMA, and CDMA
cellular handsets, Laptop and Notebook portable computers,
and other portable devices. Features include extremely low
power consumption and low shutdown current, low dropout
voltage, exceptional loop stability able to accommodate a
Block Diagrams
VIN
Bandgap
EN
Error
Amplifier
p
VOUT
ADJ
FAN2518: pin 4 – ADJ, allowing the user to adjust the
output voltage over a wide range using an external voltage
divider.
FAN2518-XX: pin 4 – BYP, to which a bypass capacitor
may be connected for optimal noise performance. Output
voltage is fixed, indicated by the suffix XX.
FAN2519-XX: pin 4 – ERR, a flag which indicates that the
output voltage has dropped below the specified minimum
due to a fault condition.
The standard fixed output voltages available are 2.5V, 2.6V,
2.7V, 2.8V, 2.85V, 3.0V, and 3.3V. Custom output voltage are
also available: please contact your local Fairchild Sales
Office for information.
VIN
Bandgap
EN
Error
Amplifier
p
BYP
VOUT
FAN2518
Thermal
Sense
GND
VIN
Bandgap
FAN2518-XX
EN
Error
Amplifier
p
Thermal
Sense
ERR
VOUT
GND
FAN2519-XX
Thermal
Sense
GND
REV. 1.0.6 2/14/03

1 Page





FAN2519 pdf, ピン配列
FAN2518/FAN2519
PRODUCT SPECIFICATION
An Enable pin, available on all devices, allows the user to
shut down the regulator output to conserve power, reducing
supply current to less than 1µA. The output can then be
re-Enabled within 500µSec, fulfilling the fast power-cycling
needs of CDMA applications. Depending on the model
selected, other control and status functions are available at
pin 4 to enhance the operation of the device. The adjustable-
voltage versions utilize pin 4 to connect to an external
voltage divider which feeds back to the regulator error
amplifier, thereby setting the voltage as desired. Two other
functions are available in the fixed-voltage versions: in
noise-sensitive applications, an external Bypass capacitor
connection is provided that allows the user to achieve opti-
mal noise performance at the output, while the Error output
functions as a diagnostic flag to indicate that the output
voltage has dropped more than 5% below the nominal fixed
voltage.
Applications Information
External Capacitors – Selection
The FAN2518/19 allows the user to utilize a wide variety of
capacitors compared to other LDO products. An innovative
design approach offers significantly reduced sensitivity to
ESR (Effective Series Resistance), which degrades regulator
loop stability in older designs. While the improvements fea-
tured in the FAN2518/19 family greatly simplify the design
task, capacitor quality still must be considered if the designer
is to achieve optimal circuit performance. In general,
ceramic capacitors offer superior ESR performance, at a
lower cost and a smaller case size than tantalums. Those with
X7R or Y5Vdielectric offer the best temperature coefficient
characteristics. The combination of tolerance and variation
over temperature in some capacitor types can result in signif-
icant variations, resulting in unstable performance over rated
conditions.
Input Capacitor
An input capacitor of 2.2µF (nominal value) or greater,
connected between the Input pin and Ground, located in
close proximity to the device, will improve transient
response and noise rejection. Higher values will offer supe-
rior input ripple rejection and transient response. An input
capacitor is recommended when the input source, either a
battery or a regulated AC voltage, is located far from the
device. Any good quality ceramic, tantalum, or metal film
capacitor will give acceptable performance, however tanta-
lum capacitors with a surge current rating appropriate to the
application must be selected to avoid catastrophic failure.
Output Capacitor
An output capacitor is required to maintain regulator loop
stability. Unlike many other LDO regulators, the FAN2518/19
family of products are nearly insensitive to output capacitor
ESR. Stable operation will be achieved with a wide variety
of capacitors with ESR values ranging from 10mto 10or
more. Tantalum or aluminum electrolytic, or multilayer
ceramic types can all be used. A nominal value of at least
1µF is recommended.
Bypass Capacitor (FAN2518 Only)
In the fixed-voltage configuration, connecting a capacitor
between the bypass pin and ground can significantly reduce
noise on the output. Values ranging from 470pF to 10nF can
be used, depending on the sensitivity to output noise in the
application.
At the high-impedance Bypass pin, care must be taken in the
circuit layout to minimize noise pickup, and capacitors must
be selected to minimize current loading (leakage). Noise
pickup from external sources can be considerable. Leakage
currents into the Bypass pin will directly affect regulator
accuracy and should be kept as low as possible; thus, high-
quality ceramic and film types are recommended for their
low leakage characteristics. Cost-sensitive applications not
concerned with noise can omit this capacitor.
Control Functions
Enable Pin
Applying a voltage of 0.4V or less at the Enable pin will dis-
able the output, reducing the quiescent output current to less
than 1µA, while a voltage of 2.0V or greater will enable the
device. If this shutdown function is not needed, the pin can
simply be connected to the VIN pin. Allowing this pin to float
will cause erratic operation.
Error Flag (FAN2519 Only)
To indicate conditions such as input voltage dropout
(low VIN), overheating, or overloading (excessive output
current), the ERR pin indicates a fault condition. It is an
open-drain output which is HIGH when the voltage at VOUT
is greater than 95% of the nominal rated output voltage and
LOW when VOUT is less than 95% or the rated output volt-
age, as specified in the error trip level characteristics.
A logic pullup resistor of 100Kis recommended at this
output. The pin can be left disconnected if unused.
Thermal Protection
The FAN2518/19 is designed to supply high peak output
currents of up to 1A for brief periods, however this output
load will cause the device temperature to increase and
exceed maximum ratings due to power dissipation. During
output overload conditions, when the die temperature
exceeds the shutdown limit temperature of 150°C, onboard
thermal protection will disable the output until the tempera-
ture drops below this limit, at which point the output is
then re-enabled. During a thermal shutdown situation the
user may assert the power-down function at the Enable
pin, reducing power consumption to the minimum level
IGND · VIN.
REV. 1.0.6 2/14/03
3


3Pages


FAN2519 電子部品, 半導体
PRODUCT SPECIFICATION
FAN2518/FAN2519
Electrical Characteristics (Notes 1, 2)
Symbol
Parameter
Regulator
VDO Drop Out Voltage
VO Output Voltage Accuracy
VDO Reference Voltage Accuracy, Adjustable
Mode
VO3
Output Voltage Accuracy, Adjustable Mode
IGND
Ground Pin Current
Protection
Current Limit
IGSD
Shut-Down Current
TSH Thermal Protection Shutdown Temperature
ETL ERR Trip Level
Enable Input
VIL Logic Low Voltage
VIH Logic High Voltage
IIH Input Current High
II Input Current Low
Switching Characteristics (Notes 1, 2)
Parameter
Enable Input4
Response time
Error Flag (FAN2519-XX)
Response time
Conditions
Conditions
IOUT = 100 µA
IOUT = 50 mA
IOUT = 50 mA
EN = 0V
FAN2519 only
Min.
Min. Typ. Max. Units
2.5 4
50 75
-2 2
1.24 1.32 1.40
-6 6
50
mV
mV
%
V
%
µA
Thermally Protected
150
90 95
1
99
µA
°C
%
1.2 0.4
V
2.0 1.4
V
1 µA
1 µA
Typ.
Max.
500
3
Unit
µsec
msec
Performance Characteristics (Notes 1, 2)
Symbol
Parameter
Conditions
Min. Typ. Max. Units
VOUT/VIN
VOUT/VOUT
eN
PSRR
Line regulation
Load regulation
Output noise
Power Supply Rejection
VIN = (VOUT + 1) to 6.5V
IOUT = 0.1 to 50mA
10Hz–1KHz
COUT = 10µF,
CBYP = 0.01µF
>10KHz,
COUT = 10µF,
CBYP = 0.01µF
120 Hz,
COUT = 10µF,
CBYP = 0.01µF
0.3 % / V
1.0 2.0 %
<7
µV/ Hz
<0.01
43 dB
Notes:
1. Unless otherwise stated, TA = 25°C, VIN = VOUT + 1V, IOUT = 100µA, VIH > 2.0 V.
2. Bold values indicate -40 TJ 125°C.
3. The adjustable version, has a bandgap voltage range of 1.24V to 1.40V with a nominal value of 1.32V.
4. When using repeated cycling.
6 REV. 1.0.6 2/14/03

6 Page



ページ 合計 : 10 ページ
 
PDF
ダウンロード
[ FAN2519 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
FAN2510

100 mA CMOS LDO Regulators with Fast Start Enable

Fairchild Semiconductor
Fairchild Semiconductor
FAN2511

100 mA CMOS LDO Regulators with Fast Start Enable

Fairchild Semiconductor
Fairchild Semiconductor
FAN2512

150 mA CMOS LDO Regulators with Fast Start Enable

Fairchild Semiconductor
Fairchild Semiconductor
FAN2513

150 mA CMOS LDO Regulators with Fast Start Enable

Fairchild Semiconductor
Fairchild Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap