DataSheet.jp

FIN1031MTC の電気的特性と機能

FIN1031MTCのメーカーはFairchild Semiconductorです、この部品の機能は「3.3V LVDS 4-Bit High Speed Differential Driver」です。


製品の詳細 ( Datasheet PDF )

部品番号 FIN1031MTC
部品説明 3.3V LVDS 4-Bit High Speed Differential Driver
メーカ Fairchild Semiconductor
ロゴ Fairchild Semiconductor ロゴ 




このページの下部にプレビューとFIN1031MTCダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

FIN1031MTC Datasheet, FIN1031MTC PDF,ピン配置, 機能
July 2001
Revised July 2001
FIN1031
3.3V LVDS 4-Bit High Speed Differential Driver
General Description
This quad driver is designed for high speed interconnects
utilizing Low Voltage Differential Signaling (LVDS) technol-
ogy. The driver translates LVTTL signal levels to LVDS lev-
els with a typical differential output swing of 350mV which
provides low EMI at ultra low power dissipation even at
high frequencies. This device is ideal for high speed trans-
fer of clock and data.
The FIN1031 can be paired with its companion receiver,
the FIN1032, or any other Fairchild LVDS receiver.
Features
s Greater than 400Mbs data rate
s 3.3V power supply operation
s 0.4ns maximum differential pulse skew
s 2.0ns maximum propagation delay
s Low power dissipation
s Power OFF protection
s Meets or exceeds the TIA/EIA-644 LVDS standard
s Pin compatible with equivalent RS-422 and LVPECL
devices
s 16-Lead SOIC and TSSOP packages save space
Ordering Code:
Order Number Package Number
Package Description
FIN1031M
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
FIN1031MTC
MTC16
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Function Table
Connection Diagram
Inputs
Outputs
EN EN DIN DOUT+
HXHH
HXL L
H X OPEN L
X LHH
XLLL
X L OPEN L
L HX Z
H = HIGH Logic Level
X = Don’t Care
L = LOW Logic Level
Z = High Impedance
DOUT
L
H
H
L
H
H
Z
Pin Descriptions
Pin Name
Description
DIN1, DIN2, DIN3, DIN4
LVTTL Data Inputs
DOUT1+, DOUT2+, DOUT3+, DOUT4+ Non-Inverting Driver Outputs
DOUT1, DOUT2, DOUT3, DOUT4Inverting Driver Outputs
EN Driver Enable Pin
EN
VCC
GND
Inverting Driver Enable Pin
Power Supply
Ground
© 2001 Fairchild Semiconductor Corporation DS500507
www.fairchildsemi.com

1 Page





FIN1031MTC pdf, ピン配列
AC Electrical Characteristics
Over supply voltage and operating temperature ranges, unless otherwise specified
Symbol
Parameter
Test Conditions
Min Typ Max
(Note 3)
Units
tPLHD
Differential Propagation Delay
LOW-to-HIGH
0.8 1.4 2.0 ns
tPHLD
Differential Propagation Delay
HIGH-to-LOW
0.8 1.4 2.0 ns
tTLHD
Differential Output Rise Time (20% to 80%)
RL = 100 , CL = 10 pF,
0.6 0.85 1.2
ns
tTHLD
Differential Output Fall Time (80% to 20%)
See Figure 2 and Figure 3 (Note 7)
0.6
0.85
1.2
ns
tSK(P)
Pulse Skew |tPLH - tPHL|
0.4 ns
tSK(LH)
tSK(HL)
Channel-to-Channel Skew
(Note 4)
0.3 ns
tSK(PP)
Part-to-Part Skew (Note 5)
1.0 ns
fMAX
Maximum Frequency (Note 6)
200 275
MHz
tZHD Differential Output Enable Time from Z to HIGH
2.5 5.0
ns
tZLD Differential Output Enable Time from Z to LOW RL = 100, CL = 10 pF,
2.7 5.0 ns
tHZD Differential Output Disable Time from HIGH to Z See Figure 4 and Figure 5 (Note 7)
3.2 5.0 ns
tLZD Differential Output Disable Time from LOW to Z
3.4 5.0
ns
Note 3: All typical values are at TA = 25°C and with VCC = 3.3V.
Note 4: tSK(LH), tSK(HL) is the skew between specified outputs of a single device when the outputs have identical loads and are switching in the same direc-
tion.
Note 5: tSK(PP) is the magnitude of the difference in propagation delay times between any specified terminals of two devices switching in the same direction
(either LOW-to-HIGH or HIGH-to-LOW) when both devices operate with the same supply voltage, same temperature, and have identical test circuits.
Note 6: fMAX Criteria: Input tR = tF < 1 ns, 0V to 3V, 50% Duty Cycle; Output VOD > 250 mV, 45% to 55% Duty Cycle; all output channels switching in phase.
Note 7: Test Circuits in Figure 2 and Figure 4 are simplified representations of test fixture and DUT loading.
3 www.fairchildsemi.com


3Pages


FIN1031MTC 電子部品, 半導体
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC16
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
www.fairchildsemi.com
6

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ FIN1031MTC データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
FIN1031MTC

3.3V LVDS 4-Bit High Speed Differential Driver

Fairchild Semiconductor
Fairchild Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap