DataSheet.jp

FH1-15S-2.54DS の電気的特性と機能

FH1-15S-2.54DSのメーカーはHirose Electricです、この部品の機能は「2.54mm Pitch Miniature Connector for Flexible Board」です。


製品の詳細 ( Datasheet PDF )

部品番号 FH1-15S-2.54DS
部品説明 2.54mm Pitch Miniature Connector for Flexible Board
メーカ Hirose Electric
ロゴ Hirose Electric ロゴ 




このページの下部にプレビューとFH1-15S-2.54DSダウンロード(pdfファイル)リンクがあります。
Total 4 pages

No Preview Available !

FH1-15S-2.54DS Datasheet, FH1-15S-2.54DS PDF,ピン配置, 機能
2.54mm Pitch Miniature Connector for Flexible Board
FH1 Series
sFeatures
1. 2.54mm FPC and FFC Connector
The contact pitch is 2.54mm.
2. Contact Reliability
This connector assures high contact reliability for high voltage
contact.
3. Eighteen Types of Contact Numbers
This connector consists of 18 kinds of 8, 9, 10, 11, 12, 13, 14,
15, 15, 17, 18, 19, 20, 21, 22, 27, and 29 contacts.
sApplications
HDD, facsimiles, printers, VTR, etc.
sProduct Specifications
Rating
Rated Current: 1A
Operating Temperature Range:_40~+85ç (Note 1) Storage Temperature Range:_10~+60ç (Note 2)
Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range: Relative humidity, 90% max.
Rated Voltage: 200V AC
(Not dewed)
(Not dewed)
Applicable FPC
t=0.13~0.3 Tin plating
Item
Specification
Condition
1. Insulation Resistance 5000Mø min.
Measured at 500V DC
2. Withstand voltage
Neither short or breakdown should occur.
500V AC for 1 minute
3. Contact Resistance
20mømax.
π FPC conductor resistance included
Measured at DC 1A
Contact resistance : 40mø max.
4. Mechanical operation
No part should be broken, cracked or loosened
30 cycles
5. Vibration
No part should be broken, cracked or loosened
Frequency: 10~55Hz and full amplitude 1.50mm in 3 directions for 2 hours, respectively
6. Shock
No part should be broken, cracked or loosened
Acceleration: 490m/S2, duration: 11ms, sine half-wave: in 3 directions for 3 times, respectively
7. Moisture Resistance in Steady State Insulation resistance: 500Mø min.
Exposed to temperature 40ç and humidity 90~95% for 96 hours
5 cycles under conditions as follows;
8. Temperature Cycle No part should be broken, cracked or loosened
Temperature: _55ç¡+5~+35¡85¡+5~+35ç
Time: 30¡10~15¡ 30~10~15 minutes
9.Resistance to Soldering heat Neither appearance should be deformed nor contact remarkably loosened. Automatic soldering: 260çœ for 10 seconds
Note 1. Temperature rise included when energized
Note 2. This storage indicates a long-term storage state for the unused product before board mounted.
The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed
in the board.
Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification".
D2

1 Page





FH1-15S-2.54DS pdf, ピン配列
sRight Angle Type
Product No.
FH1-08S-2.54DS
FH1-09S-2.54DS
FH1-10S-2.54DS
FH1-11S-2.54DS
FH1-12S-2.54DS
FH1-13S-2.54DS
FH1-14S-2.54DS
FH1-15S-2.54DS
FH1-16S-2.54DS
FH1-17S-2.54DS
FH1-18S-2.54DS
FH1-19S-2.54DS
FH1-20S-2.54DS
FH1-21S-2.54DS
FH1-22S-2.54DS
FH1-27S-2.54DS
HRS No. Number of Contacts
CL586-0015-5
8
CL586-0016-8
9
CL586-0017-0
10
CL586-0018-3
11
CL586-0019-6
12
CL586-0020-5
13
CL586-0027-4
14
CL586-0028-7
15
CL586-0029-0
16
CL586-0001-0
17
CL586-0002-3
18
CL586-0003-6
19
CL586-0004-9
20
CL586-0005-1
21
CL586-0006-4
22
CL586-0007-7
27
A
26.0
28.5
31.0
33.6
36.1
38.7
41.3
43.8
46.3
48.8
51.4
53.9
56.4
59.0
61.5
73.0
B
23.01
25.55
28.09
30.63
33.17
35.71
38.25
40.79
43.33
45.87
48.41
50.95
53.49
56.03
58.57
70.00
Unit:mm
C
17.78
20.32
22.86
25.40
27.94
30.48
33.02
35.56
38.10
40.64
43.18
45.72
48.26
50.80
53.34
66.04
D4


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ FH1-15S-2.54DS データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
FH1-15S-2.54DS

2.54mm Pitch Miniature Connector for Flexible Board

Hirose Electric
Hirose Electric
FH1-15S-2.54DSA

2.54mm Pitch Miniature Connector for Flexible Board

Hirose Electric
Hirose Electric


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap