DataSheet.jp

LZ23H3V1 の電気的特性と機能

LZ23H3V1のメーカーはSharp Electrionic Componentsです、この部品の機能は「1/3-type Interline Color CCD Area Sensor with 1 090 k Pixels」です。


製品の詳細 ( Datasheet PDF )

部品番号 LZ23H3V1
部品説明 1/3-type Interline Color CCD Area Sensor with 1 090 k Pixels
メーカ Sharp Electrionic Components
ロゴ Sharp Electrionic Components ロゴ 




このページの下部にプレビューとLZ23H3V1ダウンロード(pdfファイル)リンクがあります。

Total 20 pages

No Preview Available !

LZ23H3V1 Datasheet, LZ23H3V1 PDF,ピン配置, 機能
LZ23H3V1
LZ23H3V1
DESCRIPTION
The LZ23H3V1 is a 1/3-type (6.0 mm) solid-state
image sensor that consists of PN photo-diodes
and CCDs (charge-coupled devices). With
approximately 1 090 000 pixels (1 217 horizontal x
893 vertical), the sensor provides a stable high-
resolution color image.
FEATURES
• Optical size :
Number of effective pixels
– Approx. 1 000 k; 6.6 mm
– Approx. 790 k; 5.9 mm (compatible with XGA
format)
1 000 k pixels
790 k pixels
(5.9 mm)
6.6 mm
(1 024)
1 156
• Interline scan format
• Square pixel
• Number of effective pixels : 1 174 (H) x 884 (V)
• Number of optical black pixels
– Horizontal : 3 front and 40 rear
– Vertical : 7 front and 2 rear
• Number of dummy bits
– Horizontal : 22
– Vertical : 2
• Pixel pitch : 4.6 µm (H) x 4.6 µm (V)
• R, G, and B primary color mosaic filters
• Supports monitoring mode
• Low fixed-pattern noise and lag
• No burn-in and no image distortion
• Blooming suppression structure
• Built-in output amplifier
1/3-type Interline Color CCD Area
Sensor with 1 090 k Pixels
• Built-in overflow drain voltage circuit and reset
gate voltage circuit
• Variable electronic shutter
• Package :
16-pin shrink-pitch WDIP [Ceramic]
(WDIP016-N-0500C)
Row space : 12.70 mm
PIN CONNECTIONS
16-PIN SHRINK-PITCH WDIP
TOP VIEW
OD 1
GND 2
OFD 3
PW 4
ØRS 5
NC 6
ØH1 7
ØH2 8
16 OS
15 GND
14 ØV1A
13 ØV1B
12 ØV2
11 ØV3A
10 ØV3B
9 ØV4
(WDIP016-N-0500C)
PRECAUTIONS
• The exit pupil position of lens should be 15 to 50
mm from the top surface of the CCD.
• Refer to "PRECAUTIONS FOR CCD AREA
SENSORS" for details.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1

1 Page





LZ23H3V1 pdf, ピン配列
LZ23H3V1
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
MIN. TYP. MAX. UNIT NOTE
Ambient operating temperature
Output transistor drain voltage
TOPR
VOD
25.0
14.55 15.0 15.45
˚C
V
Overflow drain clock p-p level
Ground
VØOFD
GND
24.5
26.5
0.0
V
V
1
P-well voltage
Vertical shift
register clock
Horizontal shift
LOW level
INTERMEDIATE level
HIGH level
LOW level
VPW
VØV1AL, VØV1BL, VØV2L
VØV3AL, VØV3BL, VØV4L
VØV1AI, VØV1BI, VØV2I
VØV3AI, VØV3BI, VØV4I
VØV1AH, VØV1BH
VØV3AH, VØV3BH
VØH1L, VØH2L
–10.0
–9.5
14.55
–0.05
–9.0
0.0
15.0
0.0
VØVL
–8.5
15.45
0.05
V
V
V
V
V
2
register clock HIGH level
Reset gate clock p-p level
VØH1H, VØH2H
VØRS
4.5 5.0 5.5
4.5 5.0 5.5
V
V
1
Vertical shift register clock frequency
fØV1A, fØV1B, fØV2
fØV3A, fØV3B, fØV4
10.88
13.47
kHz 3
kHz 4
Horizontal shift register clock frequency
fØH1, fØH2
14.32
18.00
MHz
MHz
3
4
Reset gate clock frequency
14.32
MHz 3
fØRS
18.00
MHz 4
NOTES :
1. Use the circuit parameter indicated in "SYSTEM CONFIGURATION EXAMPLE", and do not connect to DC voltage directly.
2. VPW is set below VØVL that is low level of vertical shift register clock, or is used with the same power supply that is connected
to VL of V driver IC.
3. Operation frequency is 14.32 MHz.
4. Operation frequency is 18.00 MHz.
* To apply power, first connect GND and then turn on VOD. After turning on VOD, turn on PW first and then turn on other powers
and pulses. Do not connect the device to or disconnect it from the plug socket while power is being applied.
3


3Pages


LZ23H3V1 電子部品, 半導体
LZ23H3V1
TIMING CHART
TIMING CHART EXAMPLE
Pulse diagram in more detail is shown in the figure q to t after next page.
Field accumulation mode Frame accumulation Frame accumulation mode
mode at first
q q w er
e'
VD
ØV1A
Field accumulation Field accumulation
mode at first
mode
tq
ØV1B
ØV2
ØV3A
ØV3B
ØV4
ØOFD
(at OFD shutter operation)
OFDC
OS
(Number of
vertical line)
Field accumulation mode
(2.3..882.883) (2.3..882.883)
Not for use Not for use Frame accumulation mode Not for use Field accumulation
(NOTE 1) (NOTE 1) (2.4..882.884) (1.3..881.883) (NOTE 2) mode (2.3..882.883)
NOTES :
1. Do not use these signals immediately after field accumulation mode is transferred to frame
accumulation mode for still image capturing.
2. Do not use these signals immediately after frame accumulation mode is transferred to field
accumulation mode for monitoring mode image.
* Apply at least an OFD shutter pulse to OFD in each field accumulation mode.
q VERTICAL TRANSFER TIMING FOR 14.3 MHz OPERATION ¿FIELD ACCUMULATION MODE¡
Shutter speed
453 1
6 10
1/1 000 s
HD
VD
ØV1A
ØV1B
ØV2
ØV3A
ØV3B
ØV4
ØOFD
OFDC
OS
874 875 878 879 882 883 OB2
GB RG GB RG GB RG
OB1 OB2 OB5 OB6 2 3 6 7 10 11 14 15 18 19
GB RG GB RG GB RG GB RG GB RG
* Do not use the field signals immediately after frame accumulation mode is transferred to field
accumulation mode.
6

6 Page



ページ 合計 : 20 ページ
 
PDF
ダウンロード
[ LZ23H3V1 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
LZ23H3V1

1/3-type Interline Color CCD Area Sensor with 1 090 k Pixels

Sharp Electrionic Components
Sharp Electrionic Components


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap