DataSheet.jp

4066 の電気的特性と機能

4066のメーカーはON Semiconductorです、この部品の機能は「Quad Analog Switch/Quad Multiplexer」です。


製品の詳細 ( Datasheet PDF )

部品番号 4066
部品説明 Quad Analog Switch/Quad Multiplexer
メーカ ON Semiconductor
ロゴ ON Semiconductor ロゴ 




このページの下部にプレビューと4066ダウンロード(pdfファイル)リンクがあります。

Total 12 pages

No Preview Available !

4066 Datasheet, 4066 PDF,ピン配置, 機能
MC14066B
Quad Analog Switch/Quad
Multiplexer
The MC14066B consists of four independent switches capable of
controlling either digital or analog signals. This quad bilateral switch
is useful in signal gating, chopper, modulator, demodulator and
CMOS logic implementation.
The MC14066B is designed to be pin–for–pin compatible with the
MC14016B, but has much lower ON resistance. Input voltage swings
as large as the full supply voltage can be controlled via each
independent control input.
Triple Diode Protection on All Control Inputs
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Linearized Transfer Characteristics
Low Noise — 12 nV/Cycle, f 1.0 kHz typical
Pin–for–Pin Replacement for CD4016, CD4016, MC14016B
For Lower RON, Use The HC4066 High–Speed CMOS Device
MAXIMUM RATINGS (Voltages Referenced to VSS) (Note 2.)
Symbol
Parameter
Value
Unit
VDD
Vin, Vout
DC Supply Voltage Range
Input or Output Voltage Range
(DC or Transient)
– 0.5 to +18.0
– 0.5 to VDD + 0.5
V
V
Iin Input Current (DC or Transient)
per Control Pin
± 10
mA
ISW Switch Through Current
PD Power Dissipation,
per Package (Note 3.)
± 25 mA
500 mW
TA Ambient Temperature Range
Tstg Storage Temperature Range
TL Lead Temperature
(8–Second Soldering)
– 55 to +125
– 65 to +150
260
°C
°C
°C
2. Maximum Ratings are those values beyond which damage to the device
may occur.
3. Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
v vhigh–impedance circuit. For proper operation, Vin and Vout should be constrained
to the range VSS (Vin or Vout) VDD.
Unused inputs must always be tied to an appropriate logic voltage level (e.g.,
either VSS or VDD). Unused outputs must be left open.
© Semiconductor Components Industries, LLC, 2000
March, 2000 – Rev. 3
1
http://onsemi.com
PDIP–14
P SUFFIX
CASE 646
SOIC–14
D SUFFIX
CASE 751A
TSSOP–14
DT SUFFIX
CASE 948G
MARKING
DIAGRAMS
14
MC14066BCP
AWLYYWW
1
14
14066B
AWLYWW
1
14
14
066B
ALYW
SOEIAJ–14
F SUFFIX
CASE 965
1
14
MC14066B
AWLYWW
1
A = Assembly Location
WL or L = Wafer Lot
YY or Y = Year
WW or W = Work Week
ORDERING INFORMATION
Device
Package
Shipping
MC14066BCP
PDIP–14
2000/Box
MC14066BD
SOIC–14
55/Rail
MC14066BDR2 SOIC–14 2500/Tape & Reel
MC14066BDT
TSSOP–14
96/Rail
MC14066BDTEL TSSOP–14 2000/Tape & Reel
MC14066BDTR2 TSSOP–14 2500/Tape & Reel
MC14066BF
SOEIAJ–14 See Note 1.
MC14066BFEL SOEIAJ–14 See Note 1.
1. For ordering information on the EIAJ version of
the SOIC packages, please contact your local
ON Semiconductor representative.
Publication Order Number:
MC14066B/D

1 Page





4066 pdf, ピン配列
MC14066B
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎELECTRICAL CHARACTERISTICS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCharacteristic
Symbol VDD
Test Conditions
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSUPPLY REQUIREMENTS (Voltages Referenced to VEE)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPower Supply Voltage
Range
VDD
– 55_C
Min Max Min
25_C
Typ (4.)
125_C
Max Min Max Unit
3.0 18 3.0
18 3.0 18 V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎQuiescent Current Per
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPackage
IDD 5.0 Control Inputs:
— 0.25 — 0.005 0.25 — 7.5 µA
10 Vin = VSS or VDD,
— 0.5 —
v15 Switch I/O: VSS VI/O — 1.0 —
v VDD, and
vVswitch 500 mV (5.)
0.010
0.015
0.5 —
1.0 —
15
30
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTotal Supply Current
(Dynamic Plus Quiescent,
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPer Package
ID(AV)
5.0 TA = 25_C only The
10 channel component,
15 (Vin – Vout)/Ron, is
not included.)
Typical
(0.07 µA/kHz) f + IDD
(0.20 µA/kHz) f + IDD
(0.36 µA/kHz) f + IDD
µA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCONTROL INPUTS (Voltages Referenced to VSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎLow–Level Input Voltage
VIL 5.0 Ron = per spec,
10 Ioff = per spec
15
— 1.5 — 2.25 1.5 — 1.5 V
— 3.0 — 4.50 3.0 — 3.0
— 4.0 — 6.75 4.0 — 4.0
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎHigh–Level Input Voltage
VIH 5.0 Ron = per spec,
10 Ioff = per spec
15
3.5 — 3.5
7.0 — 7.0
11 — 11
2.75
5.50
8.25
— 3.5 —
— 7.0 —
— 11 —
V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Leakage Current
Iin 15 Vin = 0 or VDD
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Capacitance
Cin
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSWITCHES IN AND OUT (Voltages Referenced to VSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎRecommended Peak–to– VI/O — Channel On or Off
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPeak Voltage Into or Out
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎof the Switch
± 0.1 — ±0.00001 ± 0.1 — ± 1.0 µA
— — — 5.0 7.5 — — pF
0 VDD 0
— VDD 0 VDD Vp–p
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎRecommended Static or Vswitch — Channel On
Dynamic Voltage Across
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎthe Switch (5.) (Figure 1)
0 600 0
— 600 0 300 mV
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOutput Offset Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎON Resistance
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎON Resistance Between
Any Two Channels
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎin the Same Package
VOO
Ron
Ron
— Vin = 0 V, No Load
v5.0 Vswitch 500 mV (5.),
10 Vin = VIL or VIH
15 (Control), and Vin =
0 to VDD (Switch)
5.0
10
15
———
— 800 —
— 400 —
— 220 —
— 70 —
— 50 —
— 45 —
10 — — — µV
250 1050 — 1200
120 500 — 520
80 280 — 300
25 70 — 135
10 50 — 95
10 45 — 65
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOff–Channel Leakage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCurrent (Figure 6)
Ioff 15 Vin = VIL or VIH
±100 — ± 0.05 ±100 — ± 1000 nA
(Control) Channel to
Channel or Any One
Channel
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCapacitance, Switch I/O
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCapacitance, Feedthrough
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Switch Off)
CI/O
CI/O
— Switch Off
— — — 10 15 — — pF
— — — 0.47 — — — pF
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ4. Data labeled “Typ” is not to be used for design purposes, but is intended as an indication of the IC’s potential performance.
5. For voltage drops across the switch (Vswitch) > 600 mV ( > 300 mV at high temperature), excessive VDD current may be drawn; i.e. the
current out of the switch may contain both VDD and switch input components. The reliability of the device will be unaffected unless the
Maximum Ratings are exceeded. (See first page of this data sheet.)
http://onsemi.com
3


3Pages


4066 電子部品, 半導体
VDD
10 k
VSS
VDD
MC14066B
KEITHLEY 160
DIGITAL
MULTIMETER
1 k
RANGE
X–Y
PLOTTER
Figure 7. Channel Resistance (RON) Test Circuit
TYPICAL RESISTANCE CHARACTERISTICS
350 350
300 300
250 250
200 200
150
TA = 125°C
100
25°C
50 – 55°C
0
– 10 – 8.0 – 6.0 – 4.0 – 2.0 0 0.2 4.0 6.0 8.0
Vin, INPUT VOLTAGE (VOLTS)
Figure 8. VDD = 7.5 V, VSS = – 7.5 V
10
150 TA = 125°C
100 25°C
– 55°C
50
0
– 10 – 8.0 – 6.0 – 4.0 – 2.0 0 0.2 4.0 6.0 8.0
Vin, INPUT VOLTAGE (VOLTS)
Figure 9. VDD = 5.0 V, VSS = – 5.0 V
10
700
600
500
400
300
TA = 125°C
200
25°C
100 – 55°C
0
– 10 – 8.0 – 6.0 – 4.0 – 2.0 0 0.2 4.0 6.0 8.0
Vin, INPUT VOLTAGE (VOLTS)
Figure 10. VDD = 2.5 V, VSS = – 2.5 V
10
350
TA = 25°C
300
250 VDD = 2.5 V
200
150
5.0 V
100 7.5 V
50
0
– 10 – 8.0 – 6.0 – 4.0 – 2.0 0 0.2 4.0 6.0 8.0 10
Vin, INPUT VOLTAGE (VOLTS)
Figure 11. Comparison at 25°C, VDD = – VSS
http://onsemi.com
6

6 Page



ページ 合計 : 12 ページ
 
PDF
ダウンロード
[ 4066 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
4060AL

N-Channel Enhancement Mode Field Effect Transistor

Chino-Excel Technology
Chino-Excel Technology
4060R

Radial Lead Resistor

International Resistive
International Resistive
4066

Quad Bilateral Switch

National Semiconductor
National Semiconductor
4066

Quad Analog Switch/Quad Multiplexer

ON Semiconductor
ON Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap