DataSheet.jp

3B31-02 の電気的特性と機能

3B31-02のメーカーはAnalog Devicesです、この部品の機能は「Isolated Voltage Input」です。


製品の詳細 ( Datasheet PDF )

部品番号 3B31-02
部品説明 Isolated Voltage Input
メーカ Analog Devices
ロゴ Analog Devices ロゴ 




このページの下部にプレビューと3B31-02ダウンロード(pdfファイル)リンクがあります。

Total 8 pages

No Preview Available !

3B31-02 Datasheet, 3B31-02 PDF,ピン配置, 機能
FEATURES
Interfaces, amplifies, & filtersanalog input voltages.
Narrow-bandwidth (3Hz) single-channel single
conditioning.
Module provides simultaneous precision voltage and
current outputs.
Module circuitry can withstand 220v rms at the input screw-
terminals
Current output withstands 130V rms without damage.
All 3B30 & 3B31 series modules are mix-and-match and Hot
Swappable
APPLICATIONS
Industrial signal conditioning
Industrial signal isolation
Industrial signal filtering
PRODUCT OVERVIEW
The 3B Series of Signal Conditioning I/o Subsystems provide a
low-cost, versatile method of transferring analog transducer
signals to a data acquisition, monitoring or control system
without the inherent noise, non-linearity, drift and extraneous
voltages. The modules are designed to directly accept analog
signals from Thermocouples, RTD’s, AC and DC Strain Gages,
Torque Transducers, Frequency Transducers, LVDTs, millivolt
or process current signals. The modules amplify, isolate,
linearize and convert the transducer output signals to
standardized analog inputs for high-level analog I/O
subsystems. The 3B Series Subsystem consists of a 10” relay
rack with universal mounting backplane and a family of plug-in
(up to 16 per rack) input and output signal conditioning
modules.
Eight and four channel backplanes are also available. Each
backplane incorporates screw terminals for sensor inputs and
current outputs and a 26-pin connector for high-level single-
ended voltage outputs to the user’s equipment.
The input modules feature complete signal conditioning
circuitry optimized for specific sensors or analog signals and
provide two simultaneous high-level analog outputs: 0 to +10V
(or +10V) and 4-20 mA (or 0-20 mA).
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
Isolated Voltage Input
3B30 / 3B31
FUNCTIONAL BLOCK DIAGRAM
Figure 1. 3B30 & 3B31 Functional Block Diagram
Output modules accept 0 to +10V (or +10V) single-ended
signals and provide an isolated 4-20 mA (or 0-20 mA) process
signal. All modules feature a universal pin-out and may be
readily hot-swapped under full power and interchanged without
disrupting field wiring.
The Analog Devices 3B Series Signal Conditioning Subsystem is
designed to easily handle signal conditioning problems in
measurement and control applications. Some typical uses are in
microcomputer-based data acquisition systems, programmable
controllers, analog recorders, dedicated control systems, and any
other applications where monitoring of temperature, pressure,
flow and analog signals are required. Since each input module
features two simultaneous outputs, the voltage output can be
used to provide an input to a microprocessor-based data
acquisition or control system while the current output can be
used for analog transmission, operator interface, or an analog
backup system.
Each input module is a single-channel signal conditioner which
plugs into a socket on the backplane and accepts its signal from
the input screw terminals. All input modules provide input
protection, amplification and filtering of the input signal,
accuracy of +0.1%, low drift of +1 uV/oC (low-level input
modules), and feature two high-level analog outputs that are
compatible with most process instrumentation. The isolated
input modules also provide +1500 V peak isolation.
The choice of a specific 3B module depends upon the type of
input signal. Input modules are available to accept millivolt, volt,
process current, thermocouple, RTD, AC and DC strain gage,
frequency and LVDT inputs. The voltage output of each module
is available from the system I/O connector while the current
output is available on the output screw terminals.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.

1 Page





3B31-02 pdf, ピン配列
3B30 / 3B31
3B30 and 3B31 Models Available
Model
3B30-00
Input Range
Externally Programmable2
3B30-01
-10 mV to +10 mV
3B30-02
-50 mV to +50 mV
3B30-03
-100 mV to +100 mV
3B30-Custom
3B31-00
*
Externally Programmable2
3B31-01
-1 V to +1 V
3B31-02
-5 V to +5 V
3B31-03
-10 V to +10 V
3B31-Custom
*
1 Output current range may be user programmed to 4 mA to 20 mA using jumper supplied.
2 Requires AC1310 ranging card.
* Custom Input/Output ranges are available. Refer to configuration guide.
3B30 and 3B31 Specifications
(typical @ +25°C and ±15 V dc, and +24 V dc Power)
Description
Model 3B30
Input Range
Standard Ranges
±10 mV to ±100 mV
Custom Ranges
±5 mV to ±500 mV
Output Range
Voltage (RL > 2 K)
Current (RL = 0 to 850)1
Maximum Current Output Span
-10 V to +10 V
4 mA to 20 mA or 0 mA to 20 mA
0 mA to 31 mA
Accuracy2
Initial @ +25°C
±0.1% Span
Nonlinearity
±0.01% Span
Voltage Output
Zero
Span
Current Output3
Zero
Span
Zero and Span Adjustment Range4
Stability vs. Temperature
±1 µV/°C (RTI)
±25 ppm of Reading/°C
±25 ppm of Span/°C
±25 ppm of Reading/°C
±5% of Span
Rev. 0 | Page 3 of 8
Output Ranges1
-10 V to +10 V & 0 mA to 20 mA
-10 V to +10 V & 0 mA to 20 mA
-10 V to +10 V & 0 mA to 20 mA
-10 V to +10 V & 0 mA to 20 mA
*
-10 V to +10 V & 0 mA to 20 mA
-10 V to +10 V & 0 mA to 20 mA
-10 V to +10 V & 0 mA to 20 mA
-10 V to +10 V & 0 mA to 20 mA
-10 V to +10 V & 0 mA to 20 mA
Model 3B31
±1 V to ±10 V
±0.5 V to ±20 V
*
*
*
*
*
±25 ppm of Span/°C
*
*
*
*


3Pages


3B31-02 電子部品, 半導体
OUTLINE DIMENSIONS
3B30 / 3B31
Figure 5. Outline Dimensions
Rev. 0 | Page 6 of 8

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ 3B31-02 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
3B31-00

Isolated Voltage Input

Analog Devices
Analog Devices
3B31-01

Isolated Voltage Input

Analog Devices
Analog Devices
3B31-02

Isolated Voltage Input

Analog Devices
Analog Devices
3B31-03

Isolated Voltage Input

Analog Devices
Analog Devices


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap