DataSheet.jp

2SK2395 の電気的特性と機能

2SK2395のメーカーはSanyo Semicon Deviceです、この部品の機能は「Low-Noise HF Amp Applications」です。


製品の詳細 ( Datasheet PDF )

部品番号 2SK2395
部品説明 Low-Noise HF Amp Applications
メーカ Sanyo Semicon Device
ロゴ Sanyo Semicon Device ロゴ 




このページの下部にプレビューと2SK2395ダウンロード(pdfファイル)リンクがあります。
Total 3 pages

No Preview Available !

2SK2395 Datasheet, 2SK2395 PDF,ピン配置, 機能
Ordering number:ENN4840
N-Channel Junction Silicon FET
2SK2395
Low-Noise HF Amplifier Applications
Applications
· AM tuner RF amplifier.
· Low-noise amplifier.
Features
· Large | yfs |.
· Small Ciss.
· Ultralow noise figure.
Package Dimensions
unit:mm
2034A
[2SK2395]
4.0 2.2
0.4
0.5
0.4
0.4
123
1.3 1.3
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Drain-to-Source Voltage
Gate-to-Drain Voltage
Gate Current
Drain Current
Allowable Power Dissipation
Junction Temperature
Storage Temperature
Symbol
VDSX
VGDS
IG
ID
PD
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
3.0
3.8nom
Conditions
Parameter
Symbol
Conditions
Gate-to-Drain Breakdown Voltage
V(BR)GDS IG=–10µA, VDS=0
Gate-to-Source Leakage Current
IGSS VGS=–10V, VDS=0
Zero-Gate Voltage Drain Current
IDSS VDS=5V, VGS=0
Cutoff Voltage
VGS(off) VDS=5V, ID=100µA
Forward Transfer Admittance
| yfs | VDS=5V, VGS=0, f=1kHz
Input Capacitance
Ciss VDS=5V, VGS=0, f=1MHz
Reverse Transfer Capacitance
Crss VDS=5V, VGS=0, f=1MHz
Noise Figure
NF VDS=5V, Rg=1k, ID=1mA, f=1kHz
* : The 2SK2395 is classified by IDSS as follows : (unit : mA)
6.0 F 12.0 10.0 G 20.0 16.0 H 32.0
1 : Source
2 : Gate
3 : Drain
SANYO : SPA
Ratings
15
–15
10
50
300
150
–55 to +150
Unit
V
V
mA
mA
mW
˚C
˚C
Ratings
min typ
–15
6.0*
–0.3
20
–0.7
38
10.2
3.1
1.0
max
–1.0
32.0*
–1.5
Unit
V
nA
mA
V
mS
pF
pF
dB
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
82599TH (KT)/73094MT (KOTO) BX-1129 No.4840–1/3

1 Page





2SK2395 pdf, ピン配列
2SK2395
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of August, 1999. Specifications and information herein are subject to
change without notice.
PS No.4840–3/3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ 2SK2395 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
2SK2390

Silicon N-Channel MOS FET

Hitachi Semiconductor
Hitachi Semiconductor
2SK2391

N CHANNEL MOS TYPE (HIGH SPEED/ HIGH VOLTAGE SWITCHING/ CHOPPER REGULATOR/ DC-DC CONVERTER AND MOTOR DRIVE APPLICATIONS)

Toshiba Semiconductor
Toshiba Semiconductor
2SK2393

Silicon N-Channel MOS FET

Hitachi Semiconductor
Hitachi Semiconductor
2SK2393

Silicon N Channel MOS FET

Renesas Technology
Renesas Technology


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap