CXP5078 Datasheet PDF - Sony Corporation
| Part Number | CXP5078 | |
| Description | CMOS 4-bit Single Chip Microcomputer | |
| Manufacturers | Sony Corporation | |
| Logo |  |
|
|
There is a preview and CXP5078 download ( pdf file ) link at the bottom of this page. Total 18 Pages | ||
Preview 1 page No Preview Available !
CXP5076/5078
CMOS 4-bit Single Chip Microcomputer
For the availability of this product, please contact the sales office.
Description
CXP5076/5078 is a CMOS 4-bit microcomputer
which consists of 4-bit CPU, ROM, RAM, I/O port,
8-bit timer, 8-bit timer/counter, 18-bit time base
timer, 8-bit serial I/O, vector interruption, power on
reset function, liquid crystal displayer (LCD)
controller/driver, D/A conversion 14-bit PWM output
port, a remote control reception circuit with noise
eliminating circuit, 3-bit A/D converters, a 32kHz
timer/event counter and a power supply voltage
detection reset function. They are integrated into a
single chip with the standby function, etc. which are
to be operated at a low power consumption.
80 pin QFP (Plastic)
Features
• Instruction cycle 1.9µs/4.19MHz
122 µs/32kHz
(Possible to select with the program)
• ROM capacity 8192 × 8 bits (CXP5078)
6144 × 8 bits (CXP5076)
• RAM capacity 448 × 4 bits (Including stack, display area)
• 43 general purpose I/O ports
• 8 high current output ports
• LCD controller/driver (Possible to direct drive)
— Possible to select with the program the segment output of 16 to 32
— Possible to select with the program the duty of static, 1/2, 1/3 and 1/4
— Possible to select with the program the bias of 1/2, 1/3
• 14-bit PWM output for D/A conversion
• Remote control reception circuit
• 3-bit A/D converter (8 channels per circuit)
• 32kHz timer/event counter
• Power supply voltage detection reset function
• Low voltage operation (2.5V) ..... when operating in 122µs/32kHz
• Rich wake-up function
• 8-bit/4-bit variable serial I/O
• Arithmetic and logical operations possible between the entire ROM area, I/O area and the accumulator by
means of the memory mapped I/O
• 8-bit timer, 8-bit timer/event counter and 18-bit time base timer, independently controlled
• 2 kinds of power down modes of sleep and stop
• Power on reset circuit (mask option)
• Provided with 80 pin plastic QFP
• Provided with 80 pin piggyback QFP (CXP5070)
Structure
Silicon gate CMOS IC
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E88037A78-PS
|
| |
 
CXP5076/5078
Symbol
Name
PX0/SC
Port X0
Serial clock
PY3/EC
PY2/WP
Port Y3
Event count
input
Port Y2
Wake-up
input
PY1/PWM
Port Y1
PWM
generator
output
PY0 Port Y0
I/O Equivalent Circuit
Data
Output Select
Disable
Standby
(Note 2)
(Only during
tri-state output)
I/O
See Note 2) for the output
circuit format.
Schmitt inverter input
I
I Schmitt inverter input
Data
O Output Select (Note 1)
Disable
See Note 1) for the output
O circuit format.
PA0
to Port A
PA3
I/O
PB0/AD4
to
PB3/AD7
Port B
Analog voltage
input
I/O
Data
Output Select
Disable
Standby
(Only during
tri-state output)
(Note 2)
P
PE0
to
PE3
PF0
to
PF3
PI0/AD0
to
PI3/AD3
Port E
Port F
N
I/O
See Note 2) for the output
circuit format.
I/O Inverter input
Port I
Analog voltage
input
I/O
Description
Doubles as shift clock input/output pin
for the serial interface and as bit "0"
(input) of port X.
Doubles as event counter (8 bits) input
pin and as bit "3" (input) of port Y.
Doubles as wake-up input pin to
release the standby state and as bit
"2" (input) of port Y.
Doubles as PWM generator (14 bits)
output pin and as bit "1" (output) of
port Y.
Output pin for bit "0" of port Y.
This 4-bit input/output port permits its
each individual bit to be programmed
to serve either as input or output. For
the output format, a tri-state and pull-
up resistor possible to be programmed,
and it is also used as the standby
resetting pin.
This 4-bit input/output port has the
functions that are equivalent to those
of port A. It is also used for A/D
converter input.
This 4-bit input/output port permits its
each individual port to be programmed
to serve either as input or output. For
the output format, a tri-state and pull-
up resistor possible to be programmed.
This 4-bit input/output port has the
functions that are equivalent to those
of port E.
This 4-bit input/output port has the
functions that are equivalent to those
of port E.
It is also used for A/D converter input.
–5–
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for CXP5078 electronic component. |
| Information | Total 18 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ CXP5078.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| CXP5070 | The function is CMOS 4-BIT 1 CHIP MICROCOMPUTER. Sony Corporation | |
| CXP50700 | The function is CMOS 4-BIT SINGLE CHIP MICROCOMPUTER. Sony Corporation | |
| CXP50712 | The function is CMOS 4-BIT SINGLE CHIP MICROCOMPUTER. Sony Corporation | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
CXP5
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||