DataSheet.jp

HM-6551883 の電気的特性と機能

HM-6551883のメーカーはIntersil Corporationです、この部品の機能は「256 x 4 CMOS RAM」です。


製品の詳細 ( Datasheet PDF )

部品番号 HM-6551883
部品説明 256 x 4 CMOS RAM
メーカ Intersil Corporation
ロゴ Intersil Corporation ロゴ 




このページの下部にプレビューとHM-6551883ダウンロード(pdfファイル)リンクがあります。
Total 9 pages

No Preview Available !

HM-6551883 Datasheet, HM-6551883 PDF,ピン配置, 機能
HM-6551/883
March 1997
256 x 4 CMOS RAM
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Low Power Standby . . . . . . . . . . . . . . . . . . . . 50µW Max
• Low Power Operation . . . . . . . . . . . . . 20mW/MHz Max
• Fast Access Time. . . . . . . . . . . . . . . . . . . . . . 220ns Max
• Data Retention . . . . . . . . . . . . . . . . . . . . . . . .at 2.0V Min
• TTL Compatible Input/Output
• High Output Drive - 1 TTL Load
• Internal Latched Chip Select
• High Noise Immunity
• On-Chip Address Register
• Latched Outputs
• Three-State Output
The HM-6551/883 is a 256 x 4 static CMOS RAM fabricated
using self-aligned silicon gate technology. Synchronous cir-
cuit design techniques are employed to achieve high perfor-
mance and low power operation. On chip latches are
provided for address and data outputs allowing efficient
interfacing with microprocessor systems. The data output
buffers can be forced to a high impedance state for use in
expanded memory arrays.
The HM-6551/883 is a fully static RAM and may be main-
tained in any state for an indefinite period of time. Data
retention supply voltage and supply current are guaranteed
over temperature.
Ordering Information
PACKAGE
CERDIP
TEMPERATURE RANGE
220ns
-55oC to +125oC
HM-6551B/883
300ns
HM1-6551/883
PKG. NO.
F22.4
Pinout
HM-6551/883 (CERDIP)
TOP VIEW
A3 1
A2 2
A1 3
A0 4
A5 5
A6 6
A7 7
GND 8
D0 9
Q0 10
D1 11
22 VCC
21 A4
20 W
19 S1
18 E
17 S2
16 Q3
15 D3
14 Q2
13 D2
12 Q1
PIN DESCRIPTION
A Address Input
E Chip Enable
W Write Enable
S Chip Select
D Data Input
Q Data Output
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
6-101
File Number 2988.1

1 Page





HM-6551883 pdf, ピン配列
HM-6551/883
Absolute Maximum Ratings
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7.0V
Input, Output or I/O Voltage . . . . . . . . . . . GND -0.3V to VCC +0.3V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Thermal Information
Thermal Resistance
θJA θJC
CERDIP Package . . . . . . . . . . . . . . . . 60oC/W
15oC/W
Maximum Storage Temperature Range . . . . . . . . .-65oC to +150oC
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +175oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . +300oC
Die Characteristics
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1930 Gates
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Voltage Range . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC
Input Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to +0.8V
Input High Voltage . . . . . . . . . . . . . . . . . . . . . . . . VCC -2.0V to VCC
Input Rise and Fall Time . . . . . . . . . . . . . . . . . . . . . . . . . . 40ns Max.
TABLE 1. HM-6551/883 DC ELECTRICAL PERFORMANCE SPECIFICATIONS
Device Guaranteed and 100% Tested
PARAMETER
SYMBOL
(NOTE 1)
CONDITIONS
Output Low Voltage
VOL
VCC = 4.5V
IOL = 1.6mA
Output High Voltage
VOH
VCC = 4.5V
IOH = -0.4mA
Input Leakage Current
II VCC = 5.5V,
VI = GND or VCC
Output Leakage
Current
IOZ VCC = 5.5 V,
VO = GND or VCC
Data Retention Supply
Current
ICCDR
VCC = 2.0V, E = VCC
IO = 0mA,
VI = VCC or GND
Operating Supply
Current
ICCOP
VCC = 5.5V, (Note 2)
E = 1MHz, IO = 0mA
VI = VCC or GND
Standby Supply
Current
ICCSB
VCC = 5.5V,
IO = 0mA
VI = VCC or GND
GROUP A
SUBGROUPS
1, 2, 3
TEMPERATURE
-55oC TA +125oC
LIMITS
MIN MAX
- 0.4
1, 2, 3
-55oC TA +125oC 2.4
-
1, 2, 3
-55oC TA +125oC -1.0
+1.0
1, 2, 3
-55oC TA +125oC -1.0
+1.0
1, 2, 3
-55oC TA +125oC
-
10
1, 2, 3
-55oC TA +125oC
-
4
1, 2, 3
-55oC TA +125oC
-
10
NOTES:
1. All voltages referenced to device GND.
2. Typical derating 1.5mA/MHz increase in ICCOP.
UNITS
V
V
µA
µA
µA
mA
µA
6-103


3Pages


HM-6551883 電子部品, 半導体
Timing Waveforms
(8) TAVEL
A
(7) TEHEL
E
(9) TS2LEL
S2
HM-6551/883
(10)
TELAX
VALID
TELS2X
(11)
(19) TELEL
TELEH (6)
(8) TAVEL
NEXT
TEHEL (7)
(9) TS2LEL
D
Q
S1
W
TIME
REFERENCE
HIGH
TELQV (1)
TAVQV (2)
(3) TS1LQX
VALID OUTPUT
-1 0
12
FIGURE 1. READ CYCLE
3
TS1HQZ (5)
45
TIME
REFERENCE
-1
0
1
2
3
4
5
E
H
L
L
H
TRUTH TABLE
INPUTS
OUTPUTS
S1 S2 W A D
Q
FUNCTION
HXXXX
Z Memory Disabled
X L HVX
Z Addresses and S2 are Latched,
Cycle Begins
L XHXX
X Output Enabled but Undefined
L XHXX
V Data Output Valid
L XHXX
V Outputs Latched, Valid Data,
S2 Unlatches
HXXXX
Z Prepare for Next Cycle
(Same as -1)
X L HVX
Z Cycle Ends, Next Cycle Begins
(Same as 0)
The HM-6551/883 Read Cycle is initiated by the falling edge
of E. This signal latches the input address word and S2 into
on-chip registers providing the minimum setup and hold
times are met. After the required hold time, these inputs may
change state without affecting device operation. S2 acts as a
high order address and simplifies decoding. For the output to
be read, E, S1 must be low and W must be high. S2 must
have been latched low on the falling edge of E. The output
data will be valid at access time (TELQV). The HM-6551/883
has output data latches that are controlled by E. On the ris-
ing edge of E the present data is latched and remains in that
state until E falls. Also on the rising edge of E, S2 unlatches
and controls the outputs along with S1. Either or both S1 or
S2 may be used to force the output buffers into a high
impedance state.
6-106

6 Page



ページ 合計 : 9 ページ
 
PDF
ダウンロード
[ HM-6551883 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HM-6551883

256 x 4 CMOS RAM

Intersil Corporation
Intersil Corporation


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap