DataSheet.jp

HLMP-J150 の電気的特性と機能

HLMP-J150のメーカーはAgilent(Hewlett-Packard)です、この部品の機能は「T-1 (3 mm) High Performance TS AlGaAs Red LED Lamps」です。


製品の詳細 ( Datasheet PDF )

部品番号 HLMP-J150
部品説明 T-1 (3 mm) High Performance TS AlGaAs Red LED Lamps
メーカ Agilent(Hewlett-Packard)
ロゴ Agilent(Hewlett-Packard) ロゴ 




このページの下部にプレビューとHLMP-J150ダウンロード(pdfファイル)リンクがあります。
Total 7 pages

No Preview Available !

HLMP-J150 Datasheet, HLMP-J150 PDF,ピン配置, 機能
H
T-13/4 (5 mm), T-1 (3 mm), High
Performance, Tinted, Diffused,
AlInGaP, and TS AlGaAs Red
LED Lamps
Technical Data
HLMA-DX05 Series
HLMA-KX05 Series
HLMP-D1XX Series
HLMP-J100/J150 Series
Features
• High Light Output Over a
Wide Range of Currents
• Popular T-1 and T-1 3/4
Packages
• Choice of Three Colors
Amber
Reddish-Orange
Deep Red
• Wide Viewing Angles
• Long Life: Solid State
Technology
• Available on Tape and Reel
Applications
• Outdoor Message Boards
• Automotive Lighting
• Portable Equipment
• Medical Equipment
• Changeable Message Signs
Description
The HLMA-D/KXXX series tinted,
diffused, solid state lamps utilize
the newly developed aluminum
indium gallium phosphide
(AlInGaP) LED technology. This
technology has a very high
luminous efficiency, capable of
producing high light output over a
wide range of drive currents.
These LED lamps are available
with a choice of two colors, 592
nm amber and 615 nm reddish-
orange, and with two viewing
angles, 65° and 60°.
The HLMP-D/JXXX series tinted,
diffused solid state lamps utilize
the highly optimized transparent
substrate aluminum gallium
arsenide (TS AlGaAs) LED
technology. This technology has a
very high luminous efficiency,
Device Selection Guide
Package Description
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Standard Current
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Diffused, Low Current
Viewing
Angle
2θ1/2
65°
60°
40°
Amber
λd = 592 nm
HLMA-
DL05
HLMA-
KL05
25°
55°
55°
Reddish-
Orange
λd = 615 nm
HLMA-
DH05
HLMA-
KH05
Deep
Red
λd = 644 nm
HLMP-
D115
HLMP-
D120
HLMP-
J100
HLMP-
J150
Package
Outline
A
B
A
A
C
C
5964-9287E
1-49

1 Page





HLMP-J150 pdf, ピン配列
Optical Characteristics at TA = 25°C
Part Number
HLMA-
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min. Typ.
Peak
Wavelength
λpeak (nm)
Typ.
DL05
35 100
594
DH05
35 100
621
KL05
35 100
594
KH05
35 100
621
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
592
615
592
615
Viewing
Angle
2 θ1/2
Degrees[3]
Typ.
65
65
60
60
Luminous
Efficacy
ηv
(lm/w)
480
263
480
263
Notes:
1. φv is the total luminous flux output as measured with an integrating sphere.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at TA = 25°C
Part
Number
HLMA-
Forward
Voltage
VF (Volts)
@ IF = 20 mA
Typ. Max.
Reverse
Breakdown
VR (Volts)
@ IR = 100 µA
Min. Typ.
Capacitance
C (pF)
VF = 0,
f = 1 mHz
Typ.
DL05 1.9 2.4 5
25
60
DH05 1.9 2.4 5
25
60
KL05 1.9 2.4 5
25
60
KH05 1.9 2.4 5
25
60
Thermal
Resistance
RθJ-PIN (°C/W)
260
260
290
290
Speed of Response
τs (ns)
Time Constant
e-t/τs
Typ.
13
13
13
13
1.0
AMBER
0.5
REDDISH-ORANGE
0
550
594 600
621 630
650
WAVELENGTH – nm
Figure 1. Relative Intensity vs.
Wavelength.
700
200
180
160
140
120
100
80
60
40
20
0
1.0 1.5 2.0 2.5 3.0
VF – FORWARD VOLTAGE – V
Figure 2. Forward Current vs.
Forward Voltage.
1-51


3Pages


HLMP-J150 電子部品, 半導体
1.0
10-1
10-2
10-3
500
600 700
WAVELENGTH – nm
1000
Figure 8. Relative Intensity vs.
Wavelength.
300
200
100
50
20
10
5
2
1
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
VF – FORWARD VOLTAGE – V
Figure 9. Forward Current vs.
Forward Voltage.
2.4
2.0
1.0
0.5
0.2
0.1
0.05
0.01
0.5
1
2
5 10 20
50
IF – DC FORWARD CURRENT – mA
Figure 10. Relative Luminous Intensity
vs. DC Forward Current.
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
1
2
5 10 20 50 100 200 300
IPEAK – PEAK FORWARD CURRENT – mA
Figure 11. Relative Efficiency vs. Peak
Forward Current.
50
40
RθJA = 400° C/W
30
RθJA = 550° C/W
20
10
0
0 20 40 60 80 100
TA – AMBIENT TEMPERATURE – °C
Figure 12. Maximum Forward Current
vs. Ambient Temperature. Derating
Based on TJ Max = 110°C.
50
40
f > 300 Hz
30
f > 100 Hz
20
f > 1000 Hz
10
0
50 100 150 200 250 300
IPEAK – PEAK FORWARD CURRENT – mA
Figure 13. Maximum Average Current
vs. Peak Forward Current.
1-54

6 Page



ページ 合計 : 7 ページ
 
PDF
ダウンロード
[ HLMP-J150 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HLMP-J150

T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance/ Tinted/ Diffused/ AlInGaP/ and TS AlGaAs Red LED Lamps

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HLMP-J150

T-1 (3 mm) High Performance TS AlGaAs Red LED Lamps

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HLMP-J155

T-1 (3 mm) High Performance TS AlGaAs Red LED Lamps

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap