|
|
PDF HS-2400RH Data sheet ( Hoja de datos )
| Número de pieza | HS-2400RH | |
| Descripción | Radiation Hardened PRAM Four Channel Programmable Operational Amplifier | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HS-2400RH (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Data Sheet
HS-2400RH
September 1999
File Number 4027.1
Radiation Hardened PRAM Four Channel
Programmable Operational Amplifier
HS-2400RH is a four-channel programmable amplifier
providing a level of versatility unsurpassed by any other
monolithic operational amplifier. Versatility is achieved by
employing four input amplifier channels, any one (or none) of
which may be electronically selected and connected to a
single output stage through DTL/TTL compatible address
inputs. The device formed by the output and the selected
pair of inputs is an op amp which delivers excellent slew rate,
gain bandwidth and power bandwidth performance. Other
advantageous features for these dielectrically isolated
amplifiers include high voltage gain and input impedance
coupled with low input offset voltage and offset current.
External compensation is not required on this device at
closed loop gains greater than 10.
Each channel of the HS-2400RH can be controlled and
operated with suitable feedback networks in any of the
standard op amp configurations. This specialization makes
these amplifiers excellent components for multiplexing signal
selection and mathematical function designs. With 20V/µs
slew rate, 20MHz gain bandwidth and low input bias currents
make these devices ideal building blocks for signal
generators, active filters and data acquisition designs.
Programmability, coupled with 9mV maximum offset voltage
and 50nA offset current, make these amplifiers outstanding
components for signal conditioning circuits.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-95684. A “hot-link” is provided
on our homepage for downloading.
http://www.intersil.com/spacedefense/space.htm
Ordering Information
ORDERING NUMBER
5962D9568401VEA
INTERNAL
MKT. NUMBER
HS1-2400RH-Q
TEMP. RANGE
(oC)
-55 to 125
Features
• Electrically Screened to SMD # 5962-95684
• QML Qualified per MIL-PRF-38535 Requirements
• Total GAMMA Dose . . . . . . . . . . . . . . . . . . . .10k RAD(SI)
• Digital Programmability
• High Rate Slew
- Uncompensated . . . . . . . . . . . . . . . . . . . . . .20V/µs Min
- Compensated . . . . . . . . . . . . . . . . . . . . . . . . .6V/µs Min
• Wide Gain Bandwidth
- Uncompensated . . . . . . . . . . . . . . . . . . . . . .20MHz Min
- Compensated . . . . . . . . . . . . . . . . . . . . . . . . .4MHz Min
• High Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50kV/V Min
• Low Offset Current . . . . . . . . . . . . . . . . . . . . . . .50nA Max
• Single Capacitor Compensation for Unity Gain
• DTL/TTL Compatible Inputs
Applications
• Signal Selection/Multiplexing
• Operational Amplifier Gain Stage
• Oscillator Frequency
• Filter Characteristics
• Add-Subtract Functions
• Integrator Characteristics
• Comparator Levels
Pinout
16 LEAD CERAMIC DUAL-IN-LINE FRIT SEAL PACKAGE
(CERDIP) MIL-STD-1835 GDIP-T16
TOP VIEW
+IN3 1
-IN3 2
+IN4 3
-IN4 4
-IN1 5
+IN1 6
-IN2 7
+IN2 8
+-33
+- 4
+- 1
+- 2
DECODE
CONTROL
16 D0
15 D1
14 ENABLE
13 GND
12 COMP
V+
11
10 OUT
OUTPUT AMP 9 V-
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
www.intersil.com or 321-724-7143 | Copyright © Intersil Corporation 1999
1 page  
HS-2400RH
Die Characteristics
DIE DIMENSIONS:
88 mils x 67 mils x 19 mils ±1 mils
2240µm x 1710µm x 483µm ±25.4µm
INTERFACE MATERIALS:
Top Metallization:
Type: Al, 1% Cu
Thickness: 16kÅ ±2kÅ
Glassivation:
Type: Nitride (Si3N4) over Silox (SiO2, 5% Phos.).
Silox Thickness: 12kÅ ±2kÅ
Nitride Thickness: 3.5kÅ ±1.5kÅ
Substrate: Potential (Powered Up)
Unbiased
ADDITIONAL INFORMATION:
Worst Case Current Density:
< 2 x 105A/cm2
Transistor Count:
251
Process:
Bipolar Dielectric Isolation
Metallization Mask Layout
HS-2400RH
-IN2 +IN1 -IN1 -IN4 +IN4
-IN3
+IN2
+IN3
V- D0
OUT
V+
COMP GND ENABLE D1
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-
out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet HS-2400RH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HS-2400RH | Radiation Hardened PRAM Four Channel Programmable Operational Amplifier | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |