DataSheet.jp

HV9605C の電気的特性と機能

HV9605CのメーカーはSupertex Incです、この部品の機能は「High Voltage Current Mode PWM Controller」です。


製品の詳細 ( Datasheet PDF )

部品番号 HV9605C
部品説明 High Voltage Current Mode PWM Controller
メーカ Supertex Inc
ロゴ Supertex  Inc ロゴ 




このページの下部にプレビューとHV9605Cダウンロード(pdfファイル)リンクがあります。

Total 5 pages

No Preview Available !

HV9605C Datasheet, HV9605C PDF,ピン配置, 機能
HV9605C
Preliminary
High Voltage Current Mode PWM Controller
Ordering Information
+VIN
Min Max
15V 250V
Feedback
Accuracy
< ± 1%
Max
Duty Cycle
49%
14 Pin
Plastic DIP
HV9605CP
Package Options
14 Pin
Narrow Body SOIC
HV9605CNG
Die
HV9605CX
Features
BiCMOS/DMOS technology
Current mode control
49% duty cycle operation
Programmable START/STOP capability
15V to 250V input range internal start-up regulator
6.0µA standby supply current for +VIN <20V
0.9mA operating supply current
5.0V VDD supply operation
30KHz to 300KHz internal oscillator
15KHz to 150KHz converter output frequency
1.0MHz low offset error amplifier
1.25V 2% band gap reference
Output driver optimized for under 10W applications
Low driver output impedance with VDD = 0V
Fast (90nsec) over current shutdown
All pins are ESD protected
General Description
The Supertex HV9605C is a BiCMOS/DMOS single-output,
current mode, pulse width modulator IC designed to meet the
requirements of ETR-080 for ISDN applications. In a 14 pin
package, it provides all the necessary functions to implement a
single-switch PWM with a minimum of external parts.
Utilizing Supertex’s proprietary BiCMOS/DMOS technology, it
requires less than one tenth of the operating power of conventional
bipolar PWM ICs. Dynamic range for regulation is also increased
to approximately 8 times that of similar bipolar parts. It operates
directly from any DC input voltage between 15 and 250 VDC.The
START and STOP input voltage thresholds can be programmed
within the operating input voltage range by means of a resistor
divider, provided +VIN(START) > +VIN(STOP). The output stage is
push-pull CMOS, eliminating the need for external clamping
diodes. The clock frequency is set with a single external resistor.
Applications
ISDN network terminations
ISDN terminals
ISDN terminal adapters
Feature phones
SLIC circuits
PBX systems
Modems
Distributed power systems
DC/DC converters
Absolute Maximum Ratings*
+VIN, Input Voltage
Supply Voltage, VDD
Operating Temperature Range
Storage Temperature Range
Power Dissipation @ 25°C, SOIC
Power Dissipation @ 25°C, Plastic DIP
-0.5V to +250V
-0.5V to +10V
-40°C to +85°C
-65°C to +150°C
750mW
1000mW
*All voltages referenced to GND
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex produ1cts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.

1 Page





HV9605C pdf, ピン配列
Electrical Characteristics (continued)
Symbol
Parameters
Min Typ Max Unit Conditions
HV9605C
PWM
DMAX
DMIN
Maximum duty cycle
Minimum duty cycle
49.0
49.9
0
% fOUT = 20KHz
%
Minimum pulse width before pulse drop out
80 125 nsec
Reference
VREF
VREF
VREF
VREF
Reference output voltage
Load regulation
Line regulation
Reference output voltage
Long term stability
IREF(SHORT) Short circuit current
Current Sensing
VCS
VCS (LIMIT)
tDELAY
Usable control current sense range
Current limit threshold
Current limit delay to output
Error Amplifier
VFB Feedback voltage
IFB or INI
VOS
VCM
AVOL
BW
ISOURCE
ISINK
PSRR
Input bias current
Input offset voltage
Common mode input range
Open loop voltage gain
Unity gain bandwidth
Output current sourcing
Output current sinking
Power supply rejection
Status Output
ISINK
ISOURCE
VSTATUS(HIGH)
VSTATUS(LOW)
Output current sinking
Output current sourcing
High output voltage
Low output voltage
tR Rise time
1.225
1.207
1.250
1.0
2.0
1.250
3.0
0.5
1.275 V TA = 25°C
5.0 mV 0 < IREF < 0.3mA
5.0 mV 4.5V < VDD < 5.5V
1.293 V -40°C < TA < 85°C
mV TA = 125°C, 1000hrs
1.0 mA VREF = SGND
VCS (limit) V
0.6 0.7 0.8 V
90 120 nsec VCS = 1.5V
1.238
0
65
1.0
2
50
1.250
25
5.0
90
1.5
-2
4
72
1.263 V
200
25
VDD-1
-1
nA
mV
V
dB
MHz
mA
mA
dB
REF shorted to NI, FB
shorted to Comp, TA = 25°C
VFB = 3.0V, VNI = 2.5V
VFB < VNI
VFB > VNI
4.5V < VDD < 5.5V, f=1KHz
5.0
5.0
VDD-0.2
1.0
10
10
1.0
0.02
5.0
15
VDD
2.0
0.04
mA
µA
V
V
V
msec
VSTATUS = 2.0V
No load
Sinking 5mA
Sinking 100µA
4.7nF From Status to GND
3


3Pages





ページ 合計 : 5 ページ
 
PDF
ダウンロード
[ HV9605C データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HV9605

High Voltage Current Mode PWM Controller for ISDN Equipment

Supertex  Inc
Supertex Inc
HV9605C

High Voltage Current Mode PWM Controller

Supertex  Inc
Supertex Inc
HV9605CNG

High Voltage Current Mode PWM Controller

Supertex  Inc
Supertex Inc
HV9605CP

High Voltage Current Mode PWM Controller

Supertex  Inc
Supertex Inc


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap