The Supertex HV207 is an 8-channel high-voltage analog switch
integrated circuit (IC) configured as a dual 1 of 4 analog switch.
The 2 sets of 4 analog switches are controlled independently
with the 2 independent 1:4 decoders. The addressed switches
are turned ON and the unaddressed switches are turned OFF. A
logic high on the input clear pin will turn OFF all output switches
regardless of the address input states.
Absolute Maximum Ratings*
VDD Logic power supply voltage
VPP - VNN Supply voltage
VPP Positive high voltage supply
VNN Negative high voltage supply
Logic input voltages
VSIG Analog Signal Range
Peak analog signal current/channel
Power dissipation, 28 pin PLCC
-0.5V to +7.5V
-0.5V to +200V
+0.5V to -200V
-0.5V to VDD +0.3V
VNN to VPP
-65°C to +150°C
* All voltages are referenced to ground. Absolute maximum ratings are those values
which damage to the device may occur. Functional operation under these
conditions is not implied. Continuous operation of the device at the absolute rating
level may affect device reliability.
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex prod1ucts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.