DataSheet.jp

A2-11PA-2.54DSA データシート PDF ( 特性, スペック, ピン接続図 )

部品番号 A2-11PA-2.54DSA
部品説明 2.54mm Pitch High Density Connector
メーカ Hirose Electric
ロゴ Hirose Electric ロゴ 

Total 8 pages
		

No Preview Available !

A2-11PA-2.54DSA Datasheet, A2-11PA-2.54DSA PDF,ピン配置, 機能
2.54mm Pitch High Density Connector
A1 and A2 Series
sFeatures
1. High Density Mounting
Connectors are aligned in the longitudinal direction on the
2.54 mm mesh board, so that no idle space can occur.
2. Variation in Number of Contacts
The A1 series contains 16 types of 6 to 64 contacts, while
the A2 series contains 20 types of 1 to 20 contacts,
3. Compatibility
The A1 series is compatible with HIF3B series cable side
and HIF3H receptacle for wide applications.
sProduct Specifications
Current rating: 3A
Operating Temperature Range: -55 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2)
Rating
Voltage rating: 200V AC Operating Moisture Range:
40 to 80%
Storage Humidity Range:
40 to 70% (Note 2)
Item
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
5.Humidity (Steady state)
Specification
1000M ohms min.
No flashover or insulation breakdown.
15m ohms max.
No electrical discontinuity of 1µs or more
Insulation resistance 1000M ohms min.
6. Temperature Cycle
No damage, cracks, or parts looseness.
7. Operating Life
Contact resistance: 15m ohms max.
8. Resistance to Soldering heat No deformation of components affecting performance.
Condition
500V DC
650V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes 15 to 35ç: 5 minutes max.
125ç: 30 minutes15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sApplications
Computers, VTR, and other various kinds of electronic equipment
sMaterial
Part
Pin header
Insulator
Contact
Crimping socket
Crimping contact
Material
PBT
Brass
Polyamid
Phosphor bronze
Finish
Black
Selective gold plated
Black
Selective gold plated
Remarks
UL94V-0
–––––––
UL94V-0
–––––––
C2

1 Page





ページ 合計 : 8 ページ
PDF
ダウンロード
[ A2-11PA-2.54DSA.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
A2-11PA-2.54DS

There is a function of 2.54mm Pitch High Density Connector.

Hirose Electric
Hirose Electric
A2-11PA-2.54DSA

There is a function of 2.54mm Pitch High Density Connector.

Hirose Electric
Hirose Electric

多くを見つけるデータシート

部品番号部品説明メーカ
82S129

The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.

NXP
NXP
D1695

This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.

NEC
NEC

www.DataSheet.jp    |   2018   |  メール    |   最新    |   Sitemap