DataSheet.jp

A1015 の電気的特性と機能

A1015のメーカーはToshiba Semiconductorです、この部品の機能は「50V, 150mA, Silicon PNP Epitaxial Type Transistor」です。


製品の詳細 ( Datasheet PDF )

部品番号 A1015
部品説明 50V, 150mA, Silicon PNP Epitaxial Type Transistor
メーカ Toshiba Semiconductor
ロゴ Toshiba Semiconductor ロゴ 




このページの下部にプレビューとA1015ダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

A1015 Datasheet, A1015 PDF,ピン配置, 機能
2SA1015(L)
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process)
2SA1015(L)
Audio Frequency Amplifier Applications
Low Noise Amplifier Applications
High voltage and high current: VCEO = 50 V (min),
IC = 150 mA (max)
Excellent hFE linearity: hFE (2) = 80 (typ.) at VCE = 6 V, IC = 150 mA
: hFE (IC = 0.1 mA)/hFE (IC = 2 mA) = 0.95 (typ.)
Low noise: NF = 0.2dB (typ.) (f = 1 kHz)
Complementary to 2SC1815 (L)
Unit: mm
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO 50 V
Collector-emitter voltage
VCEO 50 V
Emitter-base voltage
VEBO 5 V
Collector current
IC
150
mA
Base current
IB 50 mA
Collector power dissipation
PC 400 mW
Junction temperature
Storage temperature range
Tj 125 °C
Tstg
55~125
°C
JEDEC
JEITA
TO-92
SC-43
Note: Using continuously under heavy loads (e.g. the application of high
TOSHIBA
temperature/current/voltage and the significant change in temperature,
2-5F1B
etc.) may cause this product to decrease in the reliability significantly Weight: 0.21 g (typ.)
even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Collector cut-off current
ICBO
VCB = −50 V, IE = 0
Emitter cut-off current
IEBO
VEB = −5 V, IC = 0
DC current gain
hFE (1)
(Note)
VCE = −6 V, IC = −2 mA
hFE (2) VCE = −6 V, IC = −150 mA
Collector-emitter saturation voltage
VCE (sat) IC = −100 mA, IB = −10 mA
Base-emitter saturation voltage
VBE (sat) IC = −100 mA, IB = −10 mA
Transition frequency
fT VCE = −10 V, IC = −1 mA
Collector output capacitance
Cob
VCB = −10 V, IE = 0
f = 1 MHz
Base intrinsic resistance
rbb’
VCB = −10 V, IE = 1 mA
f = 30 MHz
Noise figure
NF (1)
NF (2)
VCE = −6 V, IC = −0.1 mA
f = 100 Hz, RG = 10 kΩ
VCE = −6 V, IC = −0.1 mA
f = 1 kHz, RG = 10 kΩ
Note: hFE (1) classification O: 70~140, Y: 120~240, GR: 200~400
Min Typ. Max Unit
⎯ ⎯ −0.1 μA
⎯ ⎯ −0.1 μA
70 400
25 80
⎯ −0.1 0.3 V
⎯ ⎯ −1.1 V
80 ⎯ ⎯ MHz
4
7 pF
30
Ω
0.5
6
dB
0.2
3
1 2007-11-01

1 Page





A1015 pdf, ピン配列
2SA1015(L)
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
3 2007-11-01


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ A1015 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
A101

5 TO 100 MHZ TO-8 CASCADABLE AMPLIFIER

Tyco Electronics
Tyco Electronics
A1010B

(A1010B / A1020B) FPGAs

Actel Corporation
Actel Corporation
A1010B-xxxx

(A1010B / A1020B) FPGAs

Actel Corporation
Actel Corporation
A1011

PNP Transistor - 2SA1011

Wing Shing Computer
Wing Shing Computer


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap