|
|
PDF A1015 Data sheet ( Hoja de datos )
| Número de pieza | A1015 | |
| Descripción | Photo Interrupters | |
| Fabricantes | Panasonic Semiconductor | |
| Logotipo |  |
|
 1. 400mW, PNP Transistor - HSMC  Hay una vista previa y un enlace de descarga de A1015 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Transmissive Photosensors (Photo Interrupters)
CNA1015
Photo Interrupters
Unit : mm
Overview
CNA1015 series is a transmissive photosensor series in which a
high efficiency GaAs infrared light emitting diode is used as the
light emitting element, and a high sensitivity phototransistor is used
as the light detecting element. The two elements are arranged so as
to face each other, and objects passing between them are detected.
Features
Position detection accuracy : 0.3 mm
Gap width : 5 mm
The type directly attached to PCB
14.0
5.0±0.15
A
5.0
0.5±0.1
(C1)
Device
center
A'
(10.0)
(4-0.45)
23
(4-0.45)
(2.54)
SEC. A-A'
14
Absolute Maximum Ratings (Ta = 25˚C)
Parameter
Symbol Ratings Unit
Reverse voltage (DC)
Input (Light Forward current (DC)
emitting diode)
Power dissipation
VR
IF
PD*1
5
50
75
Collector current
IC 20
Output (Photo Collector to emitter voltage VCEO 30
transistor)
Emitter to collector voltage VECO
5
Collector power dissipation PC*2 100
Temperature Operating ambient temperature Topr –25 to +85
Storage temperature
Tstg –40 to +100
*1 Input power derating ratio is 1.0 mW/˚C at Ta = 25˚C.
*2 Output power derating ratio is 1.33 mW/˚C at Ta = 25˚C.
V
mA
mW
mA
V
V
mW
˚C
˚C
(Note)
1. Tolerance unless otherwise specified is ±0.3.
2. ( ) Dimension is reference.
Internal connector
23
14
Pin connection
Electrical Characteristics (Ta = 25˚C)
Parameter
Symbol
Conditions
Input Forward voltage (DC)
characteristics Reverse current (DC)
VF IF = 20mA
IR VR = 3V
Output characteristics Collector cutoff current
ICEO VCE = 10V
Collector current
IC VCC = 5V, IF = 20mA, RL = 100Ω
Transfer
characteristics
Collector to emitter saturation voltage
VCE(sat) IF = 40mA, IC = 1mA
Response time
tr , tf* VCC = 5V, IC = 1mA, RL = 100Ω
* Switching time measurement circuit
min typ max Unit
1.25 1.4 V
10 µA
10 200 nA
0.5 10 mA
0.4 V
5 µs
Sig.IN
50Ω
VCC
(Input pulse)
Sig.OUT (Output pulse)
RL
tr
90%
10%
tf
tr : Rise time (Time required for the collector photo current to
increase from 10% to 90% of its final value)
tf : Fall time (Time required for the collector photo current to
decrease from 90% to 10% of its initial value)
1
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet A1015.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| A101 | 5 TO 100 MHZ TO-8 CASCADABLE AMPLIFIER |  Tyco Electronics |
| A1010B | (A1010B / A1020B) FPGAs |  Actel Corporation |
| A1010B-xxxx | (A1010B / A1020B) FPGAs | Actel Corporation |
| A1011 | PNP Transistor - 2SA1011 |  Wing Shing Computer |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |