|
|
1N3045BのメーカーはMicrosemi Corporationです、この部品の機能は「Silicon 1 WATT Zener Diodes」です。 |
部品番号 | 1N3045B |
| |
部品説明 | Silicon 1 WATT Zener Diodes | ||
メーカ | Microsemi Corporation | ||
ロゴ | |||
このページの下部にプレビューと1N3045Bダウンロード(pdfファイル)リンクがあります。 Total 4 pages
SCOTTSDALE DIVISION
1N3016B thru 1N3051B
1 WATT METAL CASE ZENER DIODES
DESCRIPTION
This well established zener diode series for the 1N3016 thru 1N3051
JEDEC registration in the metal case DO-13 package provides a glass
hermetic seal for 6.8 to 200 volts. It is also well suited for high-reliability
applications where it is available in JAN, JANTX, and JANTXV military
qualifications. Lower voltages are also available in the 1N3821 thru
1N3830 series (3.3 V to 7.5 V) in the same package (see separate data
sheet). Microsemi also offers numerous other Zener diode products for a
variety of other packages including surface mount.
APPEARANCE
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
DO-13
FEATURES
• Zener Voltage Range: 6.8V to 200V
• Hermetically sealed DO-13 metal package
• Internally solder-bonded construction.
• Also available in JAN, JANTX, JANTXV
qualifications per MIL-PRF19500/115 by adding the
JAN, JANTX, or JANTXV prefixes to part numbers
for desired level of screening, e.g. JANTX1N3016B,
JANTXV1N3051B, etc.
• Surface mount also available with 1N3016BUR-1
thru 1N3051BUR-1 series on separate data sheet
APPLICATIONS / BENEFITS
• Regulates voltage over a broad operating current
and temperature range
• Wide selection from 6.8 to 200 V
• Tight voltage tolerances available
• Low reverse (leakage) currents
• Nonsensitive to ESD
• Hermetically sealed metal package
• Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
• Operating Junction and Storage Temperatures:
-65oC to +175oC
• THERMAL RESISTANCE: 50oC/W* junction to lead
at 0.375 inches (10 mm) from body or 110 oC/W
junction to ambient when leads are mounted on FR4
PC board with 4 mm2 copper pads (1 oz) and track
width 1 mm, length 25 mm
• DC Power Dissipation*: 1.0 Watt at TL < +125oC 3/8”
(10 mm) from body or 1.0 Watts at TL < +65oC when
mounted on FR4 PC board as described for thermal
resistance above (also see Fig 1)
• Forward Voltage @ 200 mA: 1.5 Volts.
• Solder Temperatures: 260 o C for 10 s (maximum)
MECHANICAL AND PACKAGING
• CASE: DO-13 (DO-202AA), welded, hermetically
sealed metal and glass
• FINISH: All external surfaces are Tin-Lead (Pb/Sn)
plated and solderable per MIL-STD-750 method
2026
• POLARITY: Cathode connected case.
• WEIGHT: 1.4 grams.
• Tape & Reel option: Standard per EIA-296 (add
“TR” suffix to part number)
• See package dimensions on last page
* For further mounting reference, thermal resistance from junction to metal case may be reduced to < 20 oC/W
when mounting DO-13 metal case directly on heat sink.
Copyright 2003
11-03-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
1 Page SCOTTSDALE DIVISION
1N3016B thru 1N3051B
1 WATT METAL CASE ZENER DIODES
OUTLINE AND CIRCUIT
Voltage Temperature
Coefficient %/oC
TL – Lead Temperature (oC) 3/8” from body
or TA on FR4 PC Board
FIGURE 1
Power Derating Curve
mV Change /oC
NOMINAL ZENER VOLTAGE (VOLTS)
FIGURE 2
Typical Zener Voltage Temperature
Coeff. vs. Zener Voltage
PACKAGE DIMENSIONS
FIGURE 3
Typical Capacitance vs. Reverse Voltage for 1-Watt Zeners
DO-13 (DO-202AA)
Copyright 2003
11-03-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3
3Pages | |||
ページ | 合計 : 4 ページ | ||
|
PDF ダウンロード | [ 1N3045B データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
1N3045 | Diode Zener Single 110V 20% 1W 2-Pin DO-13 | New Jersey Semiconductor |
1N3045A | Diode Zener Single 110V 10% 1W 2-Pin DO-13 | New Jersey Semiconductor |
1N3045B | Silicon 1 WATT Zener Diodes | Microsemi Corporation |
1N3045B | 1 WATT ZENER DIODES | Compensated Deuices Incorporated |