DataSheet.jp

1B21 データシート PDF ( 特性, スペック, ピン接続図 )

部品番号 1B21
部品説明 Voltage-to-Current Converter
メーカ Analog Devices
ロゴ Analog Devices ロゴ 

Total 9 pages
		

No Preview Available !

1B21 Datasheet, 1B21 PDF,ピン配置, 機能
FEATURES
Wide input range: 0 V to 1 V up to 0 V to 10 V
High CMV isolation: 1500 V rms
Programmable output ranges: 4mA to 20mA
0 to 20 mA
Load resistance range: 0 to 1.35 kΩ maximum
High accuracy
Low offset tempco: ±300 nA/°C
Low gain tempco: ±50 ppm/°C
Low nonlinearity: ±0.02%
High CMR: 90 dB minimum
Small package: 0.7” × 2.1” × 0.35”
Meets IEEE Standard 472: transient protection (SWC)
APPLICATIONS
Multichannel process control
DAC—current loop interface
Analog transmitters and controllers
Remote data acquisition systems
GENERAL DESCRIPTION
The 1B21 is an isolated voltage-to-current converter that
incorporates a unique circuit design utilizing transformer-based
isolation and automated surface-mount manufacturing technology.
It provides an unbeatable combination of versatility and perfor-
mance in a compact plastic package. Designed for industrial
applications, it is especially suited for harsh environments with
extremely high common-mode interference.
Functionally, the V/I converter consists of four basic sections:
input conditioning, modulator, demodulator and current source
(see Figure 1). The input is a resistor-programmable gain stage
that accepts a 0 V to 1 V up to 0 V to 10 V voltage input. This
maps into a 0 mA to 20 mA output or can be offset by 20%
using the internal reference for 4 mA to 20 mA operation. The
high level signal is modulated and passed across the barrier
which provides complete input to output galvanic isolation of
1500 V rms continuous by the use of transformer-coupling
techniques. Nonlinearity is an excellent ±0.05% maximum.
Designed for multichannel applications, the 1B21 requires an
external loop supply and can accept up to 30 V maximum. This
Isolated, Loop-Powered
Voltage-to-Current Converter
1B21
FB 18
INPUT 17
REF
OUT
19
+15V 20
–15V 22
COM 21
FUNCTIONAL BLOCK DIAGRAM
SIGNAL
ISOLATION
1
OUT
HIGH
REF
MODULATOR
DEMODULATOR
TIMING
T1
POWER
ISOLATION
TIMING
38
OUT
LOW
OSCILLATOR
T2
RECTIFIER
1B21
Figure 1.
provides a loop supply compliance of 27V, which is sufficient to
drive a 1.35 kΩ load resistance.
The 1B21 is fully specified over −25°C to +85°C and operates
over the industrial (−40°C to +85°C) temperature range.
DESIGN FEATURES AND USER BENEFITS
High CMV Isolation. The 1B21 features high input to output
galvanic isolation to eliminate ground loops and offer protection
against damage from transients and fault voltages. The isolation
barrier will withstand continuous CMV of 1500V rms and
meets the IEEE Standard for Transient Voltage Protection
(Std. 472-SWC).
Small Size. The 1B21 package size (0.7” × 2.1” DIP) makes it an
excellent choice in multichannel systems for maximum channel
density. The 0.35” height also facilitates applications with
limited board clearance.
Ease of Use. Complete isolated voltage-to-current conversion
with minimum external parts required to get a conditioned
current signal. No external buffers or drivers are required.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©1991–2009 Analog Devices, Inc. All rights reserved.

1 Page





ページ 合計 : 9 ページ
PDF
ダウンロード
[ 1B21.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
1B20

There is a function of Diode.

American Microsemiconductor
American Microsemiconductor
1B21

There is a function of Voltage-to-Current Converter.

Analog Devices
Analog Devices
1B22

There is a function of Programmable/ Isolated Voltage-to-Current Converter.

Analog Devices
Analog Devices

多くを見つけるデータシート

部品番号部品説明メーカ
82S129

The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.

NXP
NXP
D1695

This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.

NEC
NEC

www.DataSheet.jp    |   2018   |  メール    |   最新    |   Sitemap