|
|
Número de pieza | AK93C41A | |
Descripción | 0.9V operation 1K / 2Kbit Serial CMOS EEPROM | |
Fabricantes | Asahi Kasei Microsystems | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AK93C41A (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! ASAHI KASEI
[AK93C41A/51A]
AK93C41A / 51A
0.9V operation 1K / 2Kbit Serial CMOS EEPROM
Features
† ADVANCED CMOS EEPROM TECHNOLOGY
† LOW VCC OPERATION … Vcc = 0.9V ∼ 3.6V
Preliminary
† AK93C41A • • 1024 bits, 64 × 16 organization
AK93C51A • • 2048 bits, 128 × 16 organization
† SERIAL INTERFACE
- Interfaces with popular microcontrollers and standard microprocessors
† LOW POWER CONSUMPTION
- 10µA Max. Standby (VCC=3.6V)
† Automatic address increment (READ)
† Automatic write cycle time-out with auto-ERASE
† Busy/Ready status signal
† Software controlled write protection
† Hardware write protect for lower block (AK93C51A only)
† IDEAL FOR LOW DENSITY DATA STORAGE
- Low cost, space saving, 8-pin package
DAM05E-01
Block Diagram
-1-
1999/12
1 page ASAHI KASEI
[AK93C41A/51A]
Write
The write instruction is followed by 16 bits of data to be written into the specified address.
The self-timed programming cycle is initiated on the rising edge of the SK clock as the last data bit (D0) is
clocked in. The DO indicates the Busy/Ready status of the chip after the self-timed programming cycle is
initiated.
The Busy/Ready status indicator is only valid when CS is active (high). When CS is low, the DO output goes
into a high impedance state. The Busy/Ready signal outputs until a start bit (Logic"1") of the next instruction is
given to the part.
DO=logical "0" indicates that programming is still in progress. DO=logical "1" indicates that the register at the
address specified in the instruction has been written with the new data pattern contained in the instruction and
the part is ready for a next instruction.
WRITE (AK93C41A)
WRITE (AK93C51A)
DAM05E-01
-5-
1999/12
5 Page ASAHI KASEI
Synchronous Data timing
[AK93C41A/51A]
The Start of Instruction
DAM05E-01
The End of Instruction
- 11 -
1999/12
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet AK93C41A.PDF ] |
Número de pieza | Descripción | Fabricantes |
AK93C41A | 0.9V operation 1K / 2Kbit Serial CMOS EEPROM | Asahi Kasei Microsystems |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |