|
|
Número de pieza | 1N4692 | |
Descripción | 500 mW AXIAL-LEADED ZENER DIODES | |
Fabricantes | Microsemi Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 1N4692 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! SCOTTSDALE DIVISION
1N4678 thru 1N4717-1 DO-7
500 mW AXIAL-LEADED ZENER DIODES
DESCRIPTION
The 1N4678 thru 1N4717 series of 0.5 watt Zener Voltage Regulators
provides a selection from 1.8 to 43 volts in standard 5% tolerances as well
as tighter tolerances identified by different suffix letters on the part number.
These glass axial-leaded DO-7 Zeners also have an internal-metallurgical-
bond similar to other military requirements for these packages. Microsemi
also offers numerous other Zener products to meet higher and lower power
applications.
APPEARANCE
DO-7
(DO-204AA)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
• JEDEC registered 1N4678 thru 1N4717
• Internally solder bonded
• Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers as well as “-1” suffix
• Surface Mount available in DO-213AA package
outline by adding a UR or UR-1 (see separate data
sheet for 1N4678UR thru 1N4717UR-1)
• DO-35 glass body axial-leaded Zener equivalents
are also available (see separate data sheet)
APPLICATIONS / BENEFITS
• Regulates voltage over a broad operating
current and temperature range
• Guaranteed maximum voltage regulation 10 µA to
100 µA
• Voltage selection from 1.8 to 43 V
• Standard voltage tolerances are plus/minus 5%
with no suffix
• Tight tolerances available in plus or minus 2%
or 1% with C or D suffix respectively
• Flexible axial-lead mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method 1020
• Capacitance also specified (see Figure 3)
• Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
• Operating and Storage temperature: -65ºC to
+175ºC
• Thermal Resistance: 300 ºC/W junction to lead at
3/8 (10 mm) lead length from body, or 360ºC/W
junction to ambient when mounted on FR4 PC board
(1 oz Cu) with 4 mm2 copper pads and track width 1
mm, length 25 mm
•
Steady-State Power:
(10 mm) from body or
0.5 watts
0.417 W
at
at
TL
TA
<
<
25oC 3/8 inch
25ºC when
mounted on FR4 PC board as described for thermal
resistance (see Figure 2 for derating)
• Forward voltage @200 mA: 1.1 volts (maximum)
• Solder Temperatures: 260 ºC for 10 s (max)
MECHANICAL AND PACKAGING
• CASE: Hermetically sealed axial-lead glass DO-7
(DO-204AA) package
• TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, method 2026
• POLARITY: Cathode indicated by band where
diode is to be operated with the banded end positive
with respect to the opposite end for Zener regulation
• MARKING: Part number
• TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
• WEIGHT: 0.2 grams
• See package dimensions on last page
Copyright 2003
11-05-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet 1N4692.PDF ] |
Número de pieza | Descripción | Fabricantes |
1N4690 | 500 mW AXIAL-LEADED ZENER DIODES | Microsemi Corporation |
1N4690 | Zener Diode ( Rectifier ) | General Semiconductor |
1N4690 | Silicon Epitaxial Planar Z-Diodes | Vishay Telefunken |
1N4690 | LOW LEVEL ZENER DIODES ULTRA-LOW CURRENT: 50 A - LOW LEAKAGE | Knox SemiconductorInc |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |