|
|
PDF 1N5060GP Data sheet ( Hoja de datos )
| Número de pieza | 1N5060GP | |
| Descripción | GLASS PASSIVATED JUNCTION RECTIFIER | |
| Fabricantes | General Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 1N5060GP (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
1N5059GP THRU 1N5062GP
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 800 Volts Forward Current - 1.0 Ampere
DO-204AC
1.0
(25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
0.300 (7.6)
0.230 (5.8)
1.0
(25.4)
MIN.
0.140 (3.6)
0.104 (2.6)
DIA.
FEATURES
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ 1.0 Ampere operation at TA=75°C with no thermal
runaway
♦ Typical IR less than 0.1µA
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length at 5 lbs.,
(2.3kg) tension
Dimensions in inches and (millimeters)
*Glass -plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
* Maximum repetitive peak reverse voltage
Maximum RMS voltage
* Maximum DC blocking voltage
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75°C
* Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
* Maximum instantaneous forward voltage at 1.0A, TA=75°C
* Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length at TA=25°C
TA=75°C
* Maximum DC reverse current
at rated DC blocking voltage
TA= 25°C
TA=175°C
Typical reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR(AV)
IR
trr
CJ
RΘJA
RΘJL
TJ, TSTG
1N5059GP
200
140
200
1N5060GP
400
280
400
1N5061GP
600
420
600
1.0
50.0
1.2
5.0
150.0
5.0
300.0
2.0
15.0
45.0
20.0
-65 to +175
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
* JEDEC registered value
1N5062GP
800
560
800
UNITS
Volts
Volts
Volts
Amp
Amps
Volts
µA
µA
µs
pF
°C/W
°C
4/98
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet 1N5060GP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 1N5060G | Diode Switching 400V 2A 2-Pin SOD-57 Ammo |  New Jersey Semiconductor |
| 1N5060GP | GLASS PASSIVATED JUNCTION RECTIFIER | General Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |