|
|
Número de pieza | BY500-800 | |
Descripción | SOFT RECOVERY FAST SWITCHING PLASTIC RECTIFIER | |
Fabricantes | General Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BY500-800 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! BY500-100 THRU BY500-800
SOFT RECOVERY FAST SWITCHING PLASTIC RECTIFIER
Reverse Voltage - 100 to 800 Volts Forward Current - 5.0 Amperes
DO-201AD
0.210 (5.3)
0.190 (4.8)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
Dimension are in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ High surge current capability
♦ Fast switching for high efficiency
♦ High forward current operation
at TL=45°C
♦ Construction utilizes void-free molded plastic technique
♦ Especially designed for applications such as switch mode
power supplies, inverters, converters, TV scanning,
Ultrasonic-systems, speed controlled DC motors, low
RF interference and free wheeling diode circuits
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length at TL=45°C
Peak forward surge current
10ms single half sine-wave superimposed on
rated load at TA=25°C
Maximum repetitive peak forward surge
Maximum instantaneous forward voltage at 5.0A
Maximum DC reverse current TA=25°C
at rated DC blocking voltage TA=100°C
Maximum reverse recovery time (NOTE 1)
Maximum reverse recovery current (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction temperature range
Storage temperature range
SYMBOLS
VRRM
VRMS
VDC
BY500-100
100
70
100
BY500-200
200
140
200
BY500-400
400
280
400
BY500-600
600
420
600
BY500-800
800
560
800
UNITS
Volts
Volts
Volts
I(AV) 5.0 Amps
IFSM
IFRM
VF
IR
trr
IRM(REC)
CJ
RΘJA
TJ
TSTG
200.0
10.0
1.35
10.0
1.0
200.0
2.0
28.0
22.0
-50 to +125
-50 to +150
Amps
Amps
Volts
µA
mA
ns
Amps
pF
°C/W
°C
°C
NOTES:
(1) Reverse recovery test conditions: IF=1.0A, VR=30V, di/dt=50A/µs, Irr=10%IRM
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length with both leads to heat sink
4/98
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet BY500-800.PDF ] |
Número de pieza | Descripción | Fabricantes |
BY500-800 | SOFT RECOVERY FAST SWITCHING PLASTIC RECTIFIER | General Semiconductor |
BY500-800 | SOFT RECOVERY FAST SWITCHING PLASTIC RECTIFIER | GOOD-ARK Electronics |
BY500-800 | Fast Silicon Rectifiers | Diotec Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |