|
|
BY229-200のメーカーはNXP Semiconductorsです、この部品の機能は「Rectifier diodes fast/ soft-recovery」です。 |
部品番号 | BY229-200 |
| |
部品説明 | Rectifier diodes fast/ soft-recovery | ||
メーカ | NXP Semiconductors | ||
ロゴ | |||
このページの下部にプレビューとBY229-200ダウンロード(pdfファイル)リンクがあります。 Total 6 pages
Philips Semiconductors
Rectifier diodes
fast, soft-recovery
Product specification
BY229 series
FEATURES
• Low forward volt drop
• Fast switching
• Soft recovery characteristic
• High thermal cycling performance
• Low thermal resistance
SYMBOL
k
1
QUICK REFERENCE DATA
VR = 200 V/ 400 V/ 600 V/800 V
a IF(AV) = 8 A
2 IFSM ≤ 60 A
trr ≤ 135 ns
GENERAL DESCRIPTION
Glass-passivated double diffused
rectifier diodes featuring low
forward voltage drop, fast reverse
recovery and soft recovery
characteristic. The devices are
intended for use in TV receivers,
monitors and switched mode power
supplies.
The BY229 series is supplied in the
conventional leaded SOD59
(TO220AC) package.
PINNING
PIN DESCRIPTION
1 cathode
2 anode
tab cathode
SOD59 (TO220AC)
tab
12
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER
CONDITIONS
MIN.
VRSM
VRRM
VRWM
VR
IF(AV)
IF(RMS)
IFRM
IFSM
I2t
Tstg
Tj
Peak non-repetitive reverse
voltage
Peak repetitive reverse voltage
Crest working reverse voltage
Continuous reverse voltage
Average forward current1
RMS forward current
Repetitive peak forward current
Non-repetitive peak forward
current.
I2t for fusing
Storage temperature
Operating junction temperature
BY229
square wave;
δ = 0.5;
Tmb ≤ 122 ˚C
sinusoidal;
a = 1.57;
Tmb ≤ 125 ˚C
t = 25 µs; δ = 0.5;
Tmb ≤ 122 ˚C
t = 10 ms
t = 8.3 ms
sinusoidal;
Tj = 150 ˚C prior to
surge; with
reapplied VRWM(max)
t = 10 ms
-
-
-
-
-
-
-
-
-
-
-
-40
-
-200
200
200
150
150
MAX.
-400 -600
400 600
400 600
300 500
300 500
8
7
11
16
60
66
18
150
150
-800
800
UNIT
V
800 V
600 V
600 V
A
A
A
A
A
A
A2s
˚C
˚C
1 Neglecting switching and reverse current losses.
September 1998
1
Rev 1.200
1 Page Philips Semiconductors
Rectifier diodes
fast, soft-recovery
Product specification
BY229 series
I
F
dI
F
dt
trr
time
Qs
I
R
I
rrm
25% 100%
Fig.1. Definition of trr, Qs and Irrm
PF / W
20
Vo = 1.25 V
Rs = 0.03 Ohms
15
BY329
Tmb(max) / C
110
D = 1.0
0.5 120
0.2
10
0.1
130
5
I tp
D=
tp
T
140
Tt
0 150
0 2 4 6 8 10 12
IF(AV) / A
Fig.2. Maximum forward dissipation, PF = f(IF(AV));
square wave current waveform; parameter D = duty
cycle = tp/T.
PF / W
15
Vo = 1.25 V
Rs = 0.03 Ohms
10
5
BY329
Tmb(max) / C
120
a = 1.57
1.9
2.2
2.8
130
4
140
IFS(RMS) / A
80
BY229
70
IFSM
60
50
40
30
20
10
0
1ms
10ms
0.1s
tp / s
1s
10s
Fig.4. Maximum non-repetitive rms forward current.
IF = f(tp); sinusoidal current waveform; Tj = 150˚C prior
to surge with reapplied VRWM.
IF / A
30
Tj = 150 C
Tj = 25 C
20
BY229F
10
typ max
0
0 0.5 1 1.5 2
VF / V
Fig.5. Typical and maximum forward characteristic;
IF = f(VF); parameter Tj
Qs / uC
10
Tj = 150 C
Tj = 25 C
1
BY329
IF = 10 A
10 A
2A
1A
2A
1A
0 150
02468
IF(AV) / A
Fig.3. Maximum forward dissipation, PF = f(IF(AV));
sinusoidal current waveform; parameter a = form
factor = IF(RMS)/IF(AV).
September 1998
3
0.1
1
10
-dIF/dt (A/us)
100
Fig.6. Maximum Qs at Tj = 25˚C and 150˚C
Rev 1.200
3Pages Philips Semiconductors
Rectifier diodes
fast, soft-recovery
Product specification
BY229 series
DEFINITIONS
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
© Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
September 1998
6
Rev 1.200
6 Page | |||
ページ | 合計 : 6 ページ | ||
|
PDF ダウンロード | [ BY229-200 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
BY229-200 | Rectifier diodes fast/ soft-recovery | NXP Semiconductors |
BY229-200 | (BY229200 - BY229800) 8.0 Ampere Heatsink Glass Passivated Ultra Fast Recovery Rectifiers | Thinki Semiconductor |