DataSheet.jp

BWD4815 の電気的特性と機能

BWD4815のメーカーはPower-Oneです、この部品の機能は「DUAL OUTPUT/ 2.5 WATT」です。


製品の詳細 ( Datasheet PDF )

部品番号 BWD4815
部品説明 DUAL OUTPUT/ 2.5 WATT
メーカ Power-One
ロゴ Power-One ロゴ 




このページの下部にプレビューとBWD4815ダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

BWD4815 Datasheet, BWD4815 PDF,ピン配置, 機能
(888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com
BWD SERIES - DUAL OUTPUT, 2.5 WATT
DESCRIPTION
FEATURES
BWD dual output DC/DC converters offer excellent • Industry Standard Dip • Wide Range Input
regulation and isolation in an industry standard DIP
Package
• Input Pi Filter
package. With several input voltage ranges, the BWD • Industry Standard Pinout • 500V Isolation
is perfect for industrial, telecom, and networking
• 85°C Case Operation • Short Circuit Protection
applications. The BWD features short circuit
protection, low profile, and 500 VDC isolation. Please
see the BWS series for single output applications.
Efficiency vs. Load (24V Input)
TECHNICAL SPECIFICATIONS
Voltage Range
5 VDC Nominal
12 VDC Nominal
24 VDC Nominal
48 VDC Nominal
Reflected Ripple
Reverse Input Current
Input
Output
Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current
Dynamic Regulation, 1/4 to Full Load Step
Pk Deviation
Settling Time
Temperature Coefficient
Ripple and Noise, 20 MHz BW
Short Circuit Protection 1
Current Limit
General
No Load Input Power
Switching Frequency
Isolation
Input - Output
Input - Case
Output - Case
Isolation Resistance - Input to Output
Isolation Capacitance - Input to Output
Case Temperature
Standard Operating Range
Storage Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
Safety
Weight (Approx.)
4.5 - 9 VDC
9 - 18 VDC
19 - 36 VDC
36 - 72 VDC
20% Iin Max.
100% Iin Max.
±1%
±1.5% Vout
±2.5% Vout
10 % lout Rated
25% Iout
4% Vout
500 µs
0.02%/°C
150 mV
Continuous Auto-restart
180%
0.7 W
200 kHz
500 VDC
500 VDC
500 VDC
109 Ohms
80 pF
-25 to +85°C
-40 to +125°C
95%
5 g, 10 - 55 Hz
UL, CUL, TUV
0.7 oz
1
85
80
75
70
65
EFF.
60 BWD2415
55
EFF.
BWD2412
50
45
40
10 20 30 40 50 60 70 80 90 100
LOAD %
Efficiency vs. Load (48V Input)
90
85
80
75
70
65
60 EFF.
BWD4812
55 EFF.
BWD4808
50
45
40
10 20 30 40 50 60 70 80 90 100
LOAD %
Notes
1 Continuous short circuit protection is provided. Long-term continuous operation in
this mode is not recommended. Converter will auto-restart once fault has been
removed
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.

1 Page





BWD4815 pdf, ピン配列
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that
you prefer and add them to the model number. Example ordering options are located below the
options table.
OPTION
Negative Logic
Lucent Compatible Trim
Terminal Strip
Trim
Enable
Trim and Enable
Current Share
Headerless
SUFFIX
APPLICABLE SERIES
N HAS, HBD, HBS, HES, LES, QBS,
QES, TES, TQD
T HAS, HBD, HBS, HES, QBS, QES
TS XWS, XWD, XWT
1 IAS, LES
2 IAD, IAS, LES, SMS
3 IAS, LES
4 SMS
Y Encapsulated EWS, IWS, OWS
REMARKS
TTL “Low” Turns Module ON
TTL “High” Turns Module OFF
PIN LENGTH AND HEATSINK
OPTIONS
0.110” (2.8mm) Pin Length
0.150” (3.8mm) Pin Length
0.24” (6.1mm) Horizontal Heatsink
0.24” (6.1mm) Vertical Heatsink
0.45” (11.4mm) Horizontal
Heatsink
0.45” (11.4mm) Vertical Heatsink
0.95” (24.1mm) Horizontal
Heatsink
0.95” (24.1mm) Vertical Heatsink
Standard Pin Length is 0.180”
(4.6mm)
8 All Units (Except SMS)
9 All Units (Except SMS)
1H All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
1V All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
2H All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
2V All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
3H All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
3V All Units (Except DIP, SIP, and SM Includes Thermal Pad
Packages)
Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and
0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ BWD4815 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
BWD4812

DUAL OUTPUT/ 2.5 WATT

Power-One
Power-One
BWD4815

DUAL OUTPUT/ 2.5 WATT

Power-One
Power-One


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap