DataSheet.jp

BZD142-82 の電気的特性と機能

BZD142-82のメーカーはNXP Semiconductorsです、この部品の機能は「ZenBlockTM; zener with integrated blocking diode」です。


製品の詳細 ( Datasheet PDF )

部品番号 BZD142-82
部品説明 ZenBlockTM; zener with integrated blocking diode
メーカ NXP Semiconductors
ロゴ NXP Semiconductors ロゴ 




このページの下部にプレビューとBZD142-82ダウンロード(pdfファイル)リンクがあります。
Total 8 pages

No Preview Available !

BZD142-82 Datasheet, BZD142-82 PDF,ピン配置, 機能
DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
M3D119
BZD142
ZenBlockTM; zener with integrated
blocking diode
Preliminary specification
2000 Dec 19

1 Page





BZD142-82 pdf, ピン配列
Philips Semiconductors
ZenBlockTM; zener with integrated blocking diode
Preliminary specification
BZD142
ELECTRICAL CHARACTERISTICS ZENER/TVS
Tj = 25 °C unless otherwise specified.
TYPE
NUMBER
SUFFIX(1)
WORKING VOLTAGE
TEMPERATURE
COEFFICIENT
VZ (V) at IZ (see Fig.4) SZ (%/K) at Itest
MIN. NOM. MAX. MIN. MAX.
68 61 68 75 0.07 0.12
75 68 75 82 0.07 0.12
82 74 82 90 0.07 0.12
91 82 91 100 0.07 0.12
100 90 100 110 0.07 0.12
110 99 110 121 0.07 0.12
120 108 120 132 0.07 0.12
130 117 130 143 0.07 0.12
150 135 150 165 0.07 0.12
160 149 160 171 0.07 0.12
TEST
CURRENT
Itest (mA)
10
10
10
5
5
5
5
5
5
5
CLAMPING
VOLTAGE
V(CL)R
(V)
MAX.
94.4
103.5
114
126
139
152
167
185
204
224
at IRSM
(A)
(note 2)
106
0.97
0.88
0.79
0.72
0.66
0.60
0.54
0.49
0.45
REVERSE CURRENT
at STAND-OFF
VOLTAGE
IR (µA)
MAX.
5
5
5
5
5
5
5
5
5
5
at VR (V)
56
62
68
75
82
91
100
110
120
130
Notes
1. To complete the type number the suffix is added to the basic type number, e.g. BZD142-68.
2. Non-repetitive peak reverse current in accordance with “IEC 60060-1, Section 8” (10/1000 µs pulse); see Fig.5.
ELECTRICAL CHARACTERISTICS BLOCKING CODE
Tj = 25 °C unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
V(BR)R
IR
Cd
reverse avalanche
breakdown voltage
reverse current
diode capacitance
IR = 0.1 mA
VR = 600 V
VR = 600 V; Tj = 150 °C
f = 1 MHz; VR = 0 V;
see Fig.4
MIN.
700
TYP.
15
MAX.
UNIT
V
5 µA
100 µA
pF
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
CONDITIONS
VALUE
UNIT
Rth j-tp
Rth j-a
thermal resistance from junction to tie-point
thermal resistance from junction to ambient
lead length = 10 mm 60 K/W
note 1
120 K/W
Note
1. Device mounted on an epoxy-glass printed-circuit board, 1.5 mm thick; thickness of Cu-layer 40 µm, see Fig.2.
For more information please refer to the “General Part of associated Handbook”.
2000 Dec 19
3


3Pages


BZD142-82 電子部品, 半導体
Philips Semiconductors
ZenBlockTM; zener with integrated blocking diode
Preliminary specification
BZD142
DATA SHEET STATUS
DATA SHEET STATUS
Objective specification
PRODUCT
STATUS
Development
Preliminary specification Qualification
Product specification
Production
DEFINITIONS (1)
This data sheet contains the design target or goal specifications for
product development. Specification may change in any manner without
notice.
This data sheet contains preliminary data, and supplementary data will be
published at a later date. Philips Semiconductors reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
This data sheet contains final specifications. Philips Semiconductors
reserves the right to make changes at any time without notice in order to
improve design and supply the best possible product.
Note
1. Please consult the most recently issued data sheet before initiating or completing a design.
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
the use of any of these products, conveys no licence or title
under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
2000 Dec 19
6

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ BZD142-82 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
BZD142-82

ZenBlockTM; zener with integrated blocking diode

NXP Semiconductors
NXP Semiconductors


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap