DataSheet.es    


PDF BYV27-150 Data sheet ( Hoja de datos )

Número de pieza BYV27-150
Descripción GLASS PASSIVATED FAST EFFICIENT RECTIFIER
Fabricantes General Semiconductor 
Logotipo General Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de BYV27-150 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! BYV27-150 Hoja de datos, Descripción, Manual

BYV27-50 THRU BYV27-200
GLASS PASSIVATED FAST EFFICIENT RECTIFIER
Reverse Voltage - 50 to 200 Volts Forward Current - 2.0 Amperes
PATENTED*0.034 (0.86)
0.028 (0.71)
DIA.
DO-204AP
1.0 (25.4)
MIN.
0.150 (3.8)
0.100 (2.5)
DIA.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
FEATURES
High temperature metallurgically bonded construction
Glass passivated cavity-free junction
Superfast recovery time for high efficiency
Low forward voltage, high current capability
Capable of meeting environmental standards of
MIL-S-19500
Hermetically sealed package
Low leakage current
High surge current capability
High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP solid glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS BYV27-50 BYV27-100 BYV27-150 BYV27-200 UNITS
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Minimum reverse breakdown voltage at 100 µA
Maximum average forward rectified current
0.375" (9.5mm) lead length at TL=85°C
Peak forward surge current
10ms single half sine-wave superimposed
on rated load at TJ=175°C
Maximum instantaneous forward
voltage at 3.0A
TJ=25°C
TJ=175°C
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=165°C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3, 4)
Operating junction and storage temperature range
VRRM
VRMS
VDC
VBR
I(AV)
50
35
50
55
IFSM
VF
IR
trr
CJ
RΘJA
RΘJL
TJ, TSTG
100 150
70 105
100 150
110 165
2.0
50.0
1.07
0.88
1.0
150.0
25.0
45.0
65.0
20.0
-65 to +175
200 Volts
140 Volts
200 Volts
220 Volts
Amps
Amps
Volts
µA
ns
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to lead at 0.375” (9.5mm) lead length with both leads attached to heatsinks
(4) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length and mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper pads
4/98

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet BYV27-150.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
BYV27-150SUPER FAST RECTIFIERSGalaxy Semi-Conductor
Galaxy Semi-Conductor
BYV27-150EPITAXIAL AVALANCHE DIODESEIC
EIC
BYV27-150Ultra fast low-loss controlled avalanche rectifiersNXP Semiconductors
NXP Semiconductors
BYV27-150RECTIFIERSMicrosemi Corporation
Microsemi Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar