|
|
IXBOD1-09のメーカーはIXYSです、この部品の機能は「Breakover Diode」です。 |
部品番号 | IXBOD1-09 |
| |
部品説明 | Breakover Diode | ||
メーカ | IXYS | ||
ロゴ | |||
このページの下部にプレビューとIXBOD1-09ダウンロード(pdfファイル)リンクがあります。 Total 8 pages
Breakover Diodes
i
I
H
IBO
VH
V
VBO
Applications
lTransient voltage protection
l High-voltage switches
l Crowbar
l Lasers
l Pulse generators
Application Note H - 6
Remark: For special selection of more than 2 pieces IXBOD 1-... for every
break down voltage of VBO > 2000 V please contact us.
© 2000 IXYS All rights reserved
H-1
1 Page IXBOD 1 -06...10
Fig. 1 Energy per pulse for trapezoidal current wafeforms
(see waveform definition).
Fig. 2 Energy per pulse for exponentially decaying
current pulse (see waveforms definition).
[V] [K/W]
VT ZthJA
TVJ = 125°C
TVJ = 25°C
Va = 0 m/s
Va = 2 m/s
Fig. 3 On-state voltage
© 2000 IXYS All rights reserved
iT [A]
t [s]
Fig. 4 Transient thermal resistance.
H-3
3Pages Application
Protection of thyristors against overvoltages in forward
direction.
i
VBO (TVJ) = VBO, 25°C [1+KT(TVJ - 25°C)]
Thyristor
BOD
VD
Calculation example
a. The maximum junction temperature shall be
calculated for a module IXBOD 1 -30R at an
ambient temperature Ta = 60 °C, an exponentially
decaying current ITM = 40A, a pulsewidth tp = 2 µs,
an operating frequency f = 50 Hz and natural
convection. From the diagram Fig. 6 the energy per
pulse is obtained:
Ep1 = 6 x 10-3 Ws
For a module IXBOD1-30R the number of single
IXBOD elements is:
n=3
At natural air cooling the thermal resistance junction
to ambient amounts to (Fig.8):
RthJA = 20K/W
and the unknown temperature can be calculated as:
TVJmax1 = Ta + n • f • Ep • RthJA + Kp • Ep
TVJmax1 = 60 + 18 + 4.2 = 82.2°C
b. If following these steady-state conditions an
overload for 1 minute occurs with ITM= 60 A and a
pulse-width tp = 4 µs at the same operating
frequency f = 50 Hz, then the resulting maximum
junction temperature is calculating as follows:
TVJmax2 = TVJmax1 + (Ep2-Ep1) • n • f •ZthJA(t) + Kp • (Ep2-Ep1)
The diagrams Fig. 11 and Fig. 8 show
Ep2= 14x10-3 Ws
ZthJA(t = 1min) = 12K/W
From what follows:
TVJmax2 = 82.2 + 14.4 + 5,6 = 102.2 °C
which is allowed because the maximum admissible
junction temperature TVJM = 125 °C.
H-6
© 2000 IXYS All rights reserved
6 Page | |||
ページ | 合計 : 8 ページ | ||
|
PDF ダウンロード | [ IXBOD1-09 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
IXBOD1-06 | Breakover Diode | IXYS |
IXBOD1-07 | Breakover Diode | IXYS |
IXBOD1-08 | Breakover Diode | IXYS |
IXBOD1-09 | Breakover Diode | IXYS |