|
|
Número de pieza | 1N4005 | |
Descripción | GENERAL PURPOSE PLASTIC RECTIFIER | |
Fabricantes | General Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 1N4005 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! 1N4001 THRU 1N4007
GENERAL PURPOSE PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
DO-204AL
0.107 (2.7)
0.080 (2.0)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
FEATURES
♦ The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
♦ Construction utilizes void-free
molded plastic technique
♦ Low reverse leakage
♦ High forward surge current capability
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
NOTE: Lead diameter is 0.026 (0.66) for suffix "E" part numbers
0.023 (0.58)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
*Maximum repetitive peak reverse voltage
*Maximum RMS voltage
*Maximum DC blocking voltage
*Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75°C
*Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method) TA=75°C
*Maximum instantaneous forward voltage at 1.0A
*Maximum full load reverse current
full cycle average 0.375" (9.5mm) lead length at
TL=75°C
*Maximum DC reverse current
at rated DC blocking voltage
TA= 25°C
TA=100°C
Typical reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Maximum DC blocking voltage temperature
*Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
1N
4001
50
35
50
I(AV)
IFSM
VF
IR(AV)
IR
trr
CJ
RΘJA
RΘJL
TA
TJ, TSTG
1N
4002
100
70
100
1N
4003
1N
4004
200 400
140 280
200 400
1.0
1N
4005
600
420
600
30.0
1.1
30.0
5.0
50.0
30.0
15.0
50.0
25.0
+150
-50 to +175
NOTES:
(1) Measured on Tektronix Type "S" recovery plug-in. Tektronix 545 Scope or equivalent, IFM=20mA, IRM=1mA
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
*JEDEC registered value
1N 1N
4006 4007
800 1000
560 700
800 1000
UNITS
Volts
Volts
Volts
Amp
Amps
Volts
µA
µA
µs
pF
°C/W
°C
°C
4/98
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet 1N4005.PDF ] |
Número de pieza | Descripción | Fabricantes |
1N4000 | 10 WATT ZENER DIODES | Microsemi Corporation |
1N4000 | Zener Diode ( Rectifier ) | SOLID STATE |
1N4000 | 10W Zener Diodes | Motorola Semiconductors |
1N4000 | Diode Zener Single 7.5V 20% 10W 2-Pin DO-4 | New Jersey Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |