|
|
Número de pieza | 1N821-1 | |
Descripción | 6.2 & 6.55 Volt Zener Reference Diodes | |
Fabricantes | Microsemi | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 1N821-1 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! 1N821-1 – 1N829A-1
Available on
commercial
versions
6.2 & 6.55 Volt Zener Reference Diodes
Qualified per MIL-PRF-19500/159
DESCRIPTION
The popular 1N821-1 – 1N829A-1 series of temperature compensated reference diodes
provides both 6.2 V and 6.55 V nominal voltages and temperature coefficients as low as
0.0005 %/oC at a Zener test current of 7.5 mA. These DO-35 packaged (glass, axial leaded)
reference diodes are optionally available as RoHS compliant. This type of bonded Zener
package construction is also available in JAN, JANTX, JANTXV and JANS military
qualifications where the RoHS compliant “e3” is not an option. Microsemi also offers other
Zener Reference Diode products for a variety of voltages up to 200 V.
*Qualified Levels:
JAN, JANTX,
JANTXV and JANS
(available on some part
numbers)
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
• JEDEC registered 1N821 – 1N829 series.
• Zener impedance values of 10 ohms and 15 ohms are available.
• Reference voltage selection of 6.2 V & 6.55 V +/-5% with further tight tolerance options on
commercial at lower voltage. (Excludes 1N826 and 1N828.)
• Temperature compensated.
• Internal metallurgical bond.
• Double plug construction.
• *JAN, JANTX, JANTXV and JANS qualification per MIL-PRF-19500/159 available on 1N821-1, 823-
1, 825-1, 827-1 and 829-1.
• RoHS compliant versions available (commercial grade only).
APPLICATIONS / BENEFITS
• Provides minimal voltage changes over a broad temperature range.
• For instrumentation and other circuit designs requiring a stable voltage reference.
• Maximum temperature coefficient selections available from 0.01 %/ºC to 0.0005 %/ºC.
• Tight reference voltage tolerances of 1%, 2%, 3%, etc, available on commercial with center nominal
value of 6.2 V by special request. (Excludes 1N826 and 1N828.)
• Flexible axial-lead mounting terminals.
• Non-sensitive to ESD per MIL-STD-750 method 1020.
• Typical low capacitance of 100 pF or less.
DO-35 (DO-204AH)
Package
Also available in:
DO-213AA MELF
(surface mount)
1N821UR-1 – 1N829AUR-1
MAXIMUM RATINGS @ TA = +25 ºC unless otherwise specified
Parameters/Test Conditions
Junction and Storage temperature
Power Dissipation (1)
Maximum Zener Current
Solder Pad Temperatures at 10 s
Symbol
TJ and TSTG
PD
I ZM
T SP
Value
-55 to +175
500
70
260
Unit
oC
mW
mA
oC
Notes: 1. At TL = 25 oC and maximum current IZM of 70 mA. For optimum voltage-temperature stability, IZ = 7.5
mA (less than 50 mW in dissipated power). Derate at 3.33 mW/oC above TA = +25 oC.
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158
Tel: (978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
T4-LDS-0220, Rev. 2 (7/29/13)
©2013 Microsemi Corporation
Page 1 of 5
1 page PACKAGE DIMENSIONS
1N821-1 – 1N829A-1
Dimensions
Inch
Millimeters
Ltr Min Max Min Max Notes
BD 0.055 0.090 1.40 2.29
3
BL 0.120 0.200 3.05 5.08
3
LD 0.018 0.022 0.46 0.56
LL 1.000 1.500 25.40 38.10
LL1 0.050 1.27 4
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for information only.
3. Package contour optional within BD and length BL. Heat slugs, if any shall be included within this cylinder but shall not
be subject to minimum limit of BD.
4. Within this zone, lead diameter may vary to allow for lead finishes and irregularities, other than heat slugs.
5. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology.
T4-LDS-0220, Rev. 2 (7/29/13)
©2013 Microsemi Corporation
Page 5 of 5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet 1N821-1.PDF ] |
Número de pieza | Descripción | Fabricantes |
1N821-1 | 6.2 & 6.55 Volt Zener Reference Diodes | Microsemi |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |