DataSheet.jp

1N5184 の電気的特性と機能

1N5184のメーカーはMicrosemiです、この部品の機能は「High Voltage Rectifier」です。


製品の詳細 ( Datasheet PDF )

部品番号 1N5184
部品説明 High Voltage Rectifier
メーカ Microsemi
ロゴ Microsemi ロゴ 




このページの下部にプレビューと1N5184ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

1N5184 Datasheet, 1N5184 PDF,ピン配置, 機能
1N3643 - 1N3647, 1N4254 - 1N4257
and 1N5181 - 1N5184
Available on
commercial
versions
Voidless Hermetically Sealed
High Voltage Rectifier
Qualified per MIL-PRF-19500/279
DESCRIPTION
These “standard recovery” high voltage rectifier diode series are military qualified to MIL-PRF-
19500/279 for the 1N3644 through 1N3647 part numbers. They are ideal for high voltage,
high-reliability applications where a failure cannot be tolerated. These 0.10 and 0.25 Amp
rated rectifiers with working peak reverse voltages from 1000 to 10,000 volts are hermetically
sealed with voidless-glass construction.
Qualified Levels:
JAN and JANTX
(1N3644 – 1N3647 only)
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
JEDEC registered 1N3643 – 1N3647, 1N4254 – 1N4257, and 1N5181 – 1N5184 series.
Voidless hermetically sealed glass package.
Triple-layer passivation.
Lowest reverse leakage available.
Absolute high voltage / high temperature stability.
JAN and JANTX qualifications are available only for 1N3644 – 1N3647 per MIL-PRF-19500/279.
RoHS compliant versions available (commercial grade only).
S Package
APPLICATIONS / BENEFITS
High voltage standard recovery rectifiers 1000 to 10,000 V.
Military and other high-reliability applications.
Applications include bridges, half-bridges, catch diodes, voltage multipliers, X-ray machines,
power supplies, transmitters, and radar equipment.
High forward surge current capability.
Extremely robust construction.
Low thermal resistance.
Inherently radiation hard as described in Microsemi MicroNote 050.
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
T4-LDS-0266, Rev. 2 (130230)
©2013 Microsemi Corporation
Page 1 of 6

1 Page





1N5184 pdf, ピン配列
1N3643 - 1N3647, 1N4254 - 1N4257
and 1N5181 - 1N5184
PART NOMENCLATURE
Applicable to 1N3644 thru 1N3647 only:
JAN
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
Blank = Commercial
JEDEC type number
(See Electrical Characteristics
table)
1N3644
(e3)
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
Applicable to 1N3643, 1N4254 – 1N4257, and 1N5181 – 1N5184 only:
1N3643 (e3)
JEDEC type number
(See Electrical Characteristics
table)
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
Symbol
IO
IR
I ZSM
V (BR)
VF
VR
V RWM
SYMBOLS & DEFINITIONS
Definition
Average Rectified Forward Current: The output current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave
input and a 180 degree conduction angle.
Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature.
Maximum Rated Surge Current: The non-repetitive peak value of rated surge current at a specified wave form.
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Reverse Voltage: The reverse voltage dc value, no alternating component.
Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature
range.
T4-LDS-0266, Rev. 2 (130230)
©2013 Microsemi Corporation
Page 3 of 6


3Pages


1N5184 電子部品, 半導体
1N3643 - 1N3647, 1N4254 - 1N4257
and 1N5181 - 1N5184
PACKAGE DIMENSIONS
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Package contour optional with BD and length BL. Heat slugs, if any,
shall be included within this cylinder length but shall not be subject to
minimum limit of BD.
4. The specified lead diameters apply in the zone between .050 inch
(1.27 mm) from the diode body and the end of the lead.
5. In accordance with ASME Y14.5M, diameters are equivalent to Φx
symbology.
6. Max dimension BL will be .225” / 5.72mm for 1N5181 – 1N5184
DIMENSIONS
Ltr
INCH
MILLIMETERS Notes
Min Max Min Max
BD 0.065 0.110 1.65 2.79
3
BL 0.190 0.215 4.83 5.46 3, 6
LD 0.029 0.033 0.74 0.84
LL 1.00 1.25 25.40 31.75
LU 0.050 1.27 4
T4-LDS-0266, Rev. 2 (130230)
©2013 Microsemi Corporation
Page 6 of 6

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ 1N5184 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
1N5181

High Voltage Rectifier

Microsemi
Microsemi
1N5181

Diode Switching 4KV 0.1A 2-Pin Case S

New Jersey Semiconductor
New Jersey Semiconductor
1N5181

HIGH VOLTAGE RECTIFIERS

Digitron Semiconductors
Digitron Semiconductors
1N5182

High Voltage Rectifier

Microsemi
Microsemi


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap