DataSheet.es    


PDF 1N6628 Data sheet ( Hoja de datos )

Número de pieza 1N6628
Descripción ULTRA FAST RECOVERY GLASS RECTIFIERS
Fabricantes Microsemi 
Logotipo Microsemi Logotipo



Hay una vista previa y un enlace de descarga de 1N6628 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! 1N6628 Hoja de datos, Descripción, Manual

SCOTTSDALE DIVISION
1N6626 thru 1N6631
VOIDLESS-HERMETICALLY-SEALED
ULTRA FAST RECOVERY GLASS
RECTIFIERS
DESCRIPTION
This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-
19500/590 and is ideal for high-reliability applications where a failure cannot be
tolerated. These industry-recognized 2.0 to 4.0 Amp rated rectifiers for working
peak reverse voltages from 200 to 1000 volts are hermetically sealed with voidless-
glass construction using an internal “Category I” metallurgical bond. These devices
are also available in surface mount MELF package configurations by adding a “US”
suffix (see separate data sheet for 1N6626US thru 1N6631US). Microsemi also
offers numerous other rectifier products to meet higher and lower current ratings
with various recovery time speed requirements including standard, fast and ultrafast
device types in both through-hole and surface mount packages.
APPEARANCE
“E” Package
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
Popular JEDEC registered 1N6626 to 1N6631 series
Voidless hermetically sealed glass package
Extremely robust construction
Triple-layer passivation
Internal “Category I” Metallurgical bonds
JAN, JANTX, and JANTXV available per MIL-PRF-
19500/590
Further options for screening in accordance with MIL-
PRF-19500 for JANS by using a “SP” prefix, e.g. SP6626,
SP6629, etc.
Surface mount equivalents also available in a square end-
cap MELF configuration with “US” suffix (see separate
data sheet for 1N6626US thru 1N6631US)
Ultrafast recovery rectifier series 200 to 1000 V
Military and other high-reliability applications
Switching power supplies or other applications
requiring extremely fast switching & low forward
loss
High forward surge current capability
Low thermal resistance
Controlled avalanche with peak reverse power
capability
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
Junction Temperature: -65oC to +150oC
Storage Temperature: -65oC to +175oC
Peak Forward Surge Current @ 25oC: 75A (except
1N6631 which is 60A)
Note: Test pulse = 8.3ms, half-sine wave.
Average Rectified Forward Current (IO) at TL= +75oC
(L=.375 inch from body):
1N6626 thru 1N6628
2.3 A
1N6629 thru 1N6631
1.8 A
(Derate IO linearly at 1.0%/oC for TL> +75oC)
Average Rectified Forward Current (IO) at TA=25oC:
1N6626 thru 1N6628
1.75 A
1N6629 thru 1N6631
1.40 A
(Derate IO linearly at 0.80%/ oC for TA>+25oC. This IO
rating is typical for PC boards where thermal resistance
from mounting point to ambient is sufficiently controlled
where TJ(max) is not exceeded. See MIL-PRF-19500/590)
Thermal Resistance L= 0.375 inch (RθJL): 22oC/W
Capacitance at VR= 10 V: 40 pF
Solder temperature: 260oC for 10 s (maximum)
MECHANICAL AND PACKAGING
CASE: Hermetically sealed voidless hard glass
with Tungsten slugs
TERMINATIONS: Axial-leads are Tin/Lead
(Sn/Pb) over Copper.
MARKING: Body painted and part number, etc.
POLARITY: Cathode indicated by band
Tape & Reel option: Standard per EIA-296
Weight: 750 mg
See package dimensions on last page
Copyright © 2009
10-01-2009 REV F; SA7-57.pdf
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet 1N6628.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
1N662COMPUTER DIODE SwitchingMicrosemi Corporation
Microsemi Corporation
1N662Diode Switching 80V 0.15A 2-Pin DO-35New Jersey Semiconductor
New Jersey Semiconductor
1N6620ULTRA FAST RECTIFIERSDigitron Semiconductors
Digitron Semiconductors
1N6620Ultra Fast Recovery Rectifier DiodeSEMTECH
SEMTECH

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar