DataSheet.jp

1N6630US PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 1N6630US
部品説明 SURFACE MOUNT ULTRA FAST RECOVERY GLASS RECTIFIERS
メーカ Microsemi
ロゴ Microsemi ロゴ 



Total 4 pages
		

No Preview Available !

1N6630US Datasheet, 1N6630US PDF,ピン配置, 機能
SCOTTSDALE DIVISION
1N6626US thru 1N6631US
VOIDLESS-HERMETICALLY-SEALED
SURFACE MOUNT ULTRA FAST
RECOVERY GLASS RECTIFIERS
DESCRIPTION
APPEARANCE
This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-
19500/590 and is ideal for high-reliability applications where a failure cannot be
tolerated. These industry-recognized 2.0 to 4.0 Amp rated rectifiers for working
peak reverse voltages from 200 to 1000 volts are hermetically sealed with voidless-
glass construction using an internal “Category I” metallurgical bond. These devices
are also available in axial-leaded packages for thru-hole mounting (see separate
data sheet for 1N6626 thru 1N6631). Microsemi also offers numerous other rectifier
products to meet higher and lower current ratings with various recovery time speed
requirements including standard, fast and ultrafast device types in both through-hole
and surface mount packages.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
Package “E”
or D-5B
FEATURES
APPLICATIONS / BENEFITS
Surface mount series equivalent to the JEDEC registered
1N6626 to 1N6631 series
Voidless hermetically sealed glass package
Extremely robust construction
Triple-layer passivation
Internal “Category I” Metallurgical bonds
JAN, JANTX, and JANTXV available per MIL-PRF-
19500/590
Further options for screening in accordance with MIL-
PRF-19500 for JANS by using a “SP” prefix, e.g.
SP6626US, SP6629US, etc.
Axial-leaded equivalents also available (see separate data
sheet for 1N6626 thru 1N6631)
Ultrafast recovery rectifier series 200 to 1000 V
Military and other high-reliability applications
Switching power supplies or other applications
requiring extremely fast switching & low forward
loss
High forward surge current capability
Low thermal resistance
Controlled avalanche with peak reverse power
capability
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
Junction Temperature: -65oC to +175oC
Storage Temperature: -65oC to +175oC
Peak Forward Surge Current @ 25oC: 75A (except
1N6631 which is 60A)
Note: Test pulse = 8.3ms, half-sine wave.
Average Rectified Forward Current (IO) at TEC = +110oC:
1N6626US thru 1N6628US
4.0 A
1N6629US thru 1N6631US
2.8 A
(Derate linearly at 1.5%/oC for TEC > +110oC)
Average Rectified Forward Current (IO) at TA=25oC:
1N6626US thru 1N6628US
1.55 A
1N6629US thru 1N6631US
1.15 A
(Derate linearly at 0.67%/ oC for TA>+25oC. This IO rating
is for PC boards where thermal resistance from mounting
point to ambient is sufficiently controlled where TJ(max) is
not exceeded. See latest issue of MIL-PRF-19500/590)
Thermal Resistance junction to endcap (RθJEC): 10oC/W
Capacitance at VR= 10 V: 40 pF
Solder temperature: 260oC for 10 s (maximum)
MECHANICAL AND PACKAGING
CASE: Hermetically sealed voidless hard glass
with Tungsten slugs
TERMINATIONS: End caps are Copper with
Tin/Lead (Sn/Pb) finish. Note: Previous
inventory had solid Silver end caps with
Tin/Lead finish.
MARKING: Cathode band only
POLARITY: Cathode indicated by band
Tape & Reel option: Standard per EIA-481-B
Weight: 539 mg
See package dimensions and recommended
pad layout on last page
Copyright © 2007
10-03-2007 REV E
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1

1 Page





ページ 合計 : 4 ページ
PDF
ダウンロード
[ 1N6630US.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
1N6630US

SURFACE MOUNT ULTRA FAST RECOVERY GLASS RECTIFIERS

Microsemi
Microsemi

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap