|
|
1N5968のメーカーはMicrosemiです、この部品の機能は「5 WATT GLASS ZENER DIODES」です。 |
部品番号 | 1N5968 |
| |
部品説明 | 5 WATT GLASS ZENER DIODES | ||
メーカ | Microsemi | ||
ロゴ | |||
このページの下部にプレビューと1N5968ダウンロード(pdfファイル)リンクがあります。 Total 4 pages
SCOTTSDALE DIVISION
1N4954 thru 1N4996, 1N5968 thru 1N5969, and
1N6632 thru 1N6637
VOIDLESS-HERMETICALLY-SEALED
5 WATT GLASS ZENER DIODES
DESCRIPTION
This Zener Voltage Regulator series is military qualified to MIL-PRF-
19500/356 and is ideal for high-reliability applications where a failure
cannot be tolerated. These industry-recognized 5 Watt Zener Voltage
Regulators are hermetically sealed with voidless-glass construction using
an internal metallurgical bond. It includes Zener selections from 3.3 to 390
volts in standard 5% tolerances as well as tighter tolerances identified by
different suffix letters on the part number. They are also available in
surface-mount packages (see separate data sheet for 1N4954US thru
1N4996US, 1N5968US thru 1N5969US, and 1N6632US thru 1N6637US).
Microsemi also offers numerous other Zener products to meet higher and
lower power ratings in both thru-hole and surface mount packages.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
APPEARANCE
“E” Package
FEATURES
• Popular JEDEC registered series
• Voidless hermetically sealed glass package
• Extremely robust construction
• Triple-layer passivation
• Internal “Category I” Metallurgical bonds for 1N4954
thru 1N4996, and “Category III” for 1N6632 thru
1N6637 as well as 1N5968 thru 1N5959
• JAN, JANTX, JANTXV, and JANS available per MIL-
PRF-19500/356
• Surface mount equivalents also available in a square
end-cap MELF configuration with “US” suffix (see
separate data sheet for 1N4954US thru 1N4996US,
1N6632US thru 1N6637US and 1N5968US thru
1N5969US
APPLICATIONS / BENEFITS
• Regulates voltage over a broad operating current and
temperature range
• Extensive selection from 3.3 to 390 V
• Standard voltage tolerances are plus/minus 5% with
no suffix
• Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
• Flexible axial-lead mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method 1020
• Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
• Operating (TJ) Temperature: -65oC to +175oC.
• Storage Temperature: -65oC to +175oC.
• Power Dissipation: 5 Watts @ TL = 65oC at 3/8 inch
(10 mm) from body for 1N4954 thru 1N4996; and
TL = 25oC for 1N6632 thru 1N6637, 1N5968 thru
1N5969. Derate linearly above these temperatures
to zero at 175oC.
• Thermal Resistance: 22oC/W junction to lead at 3/8
inch (10 mm) from body for 1N4954 thru 1N4996 and
30oC/W for 1N6632 thru 1N6637, 1N5968 thru
1N5969
• Thermal Impedance at 10 ms: 1.8oC/W for 1N4954
thru 1N4996, and 3.0oC/W for both the 1N6632 thru
1N6637 & 1N5968 thru 1N5969
• Forward Voltage: 1.50 V at 1.0 A
MECHANICAL AND PACKAGING
• CASE: Hermetically sealed voidless hard glass with
Tungsten slugs
• TERMINATIONS: Axial-leads are Copper with Tin/Lead
(Sn/Pb) finish. Note: Previous inventory had solid
Silver (Ag) axial-leads and no finish.
• MARKING: Body painted and part number, etc.
• POLARITY: Cathode indicated by band
• Tape & Reel option: Standard per EIA-296
• Weight: 750 mg
Copyright © 2010
3-29-2010 REV G; SA5-37.pdf
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
1 Page SCOTTSDALE DIVISION
1N4954 thru 1N4996, 1N5968 thru 1N5969, and
1N6632 thru 1N6637
VOIDLESS-HERMETICALLY-SEALED
5 WATT GLASS ZENER DIODES
Symbol
VZ
IZ, IZT, IZK
ZZT or ZZK
VF
IR
IZM
IZSM
SYMBOLS & DEFINITIONS
Definition
Zener Voltage: The zener voltage the device will exhibit at a specified current (IZ) in its breakdown region.
Regulator Current: The dc regulator current (IZ), at a specified test point (IZT), or near breakdown knee (IZK).
Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region
at a specified rms current modulation (typically 10% of IZT or IZK) and superimposed on IZT or IZK respectively.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and
temperature.
Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
Maximum Zener Surge Current: The nonrepetitive peak value of zener surge current at a specified wave form.
GRAPHS
FIGURE 1
POWER DISSIPATION vs. LEAD
TEMPERATURE DERATING CURVE
FIGURE 2
SURGE POWER vs.
SURGE DURATION
FIGURE 3
TYPICAL ZENER IMPEDANCE vs.
ZENER CURRENT
Copyright © 2010
3-29-2010 REV G; SA5-37.pdf
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3
3Pages | |||
ページ | 合計 : 4 ページ | ||
|
PDF ダウンロード | [ 1N5968 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
1N5968 | 5 WATT ZENER DIODES | Compensated Deuices Incorporated |
1N5968 | 5 WATT GLASS ZENER DIODES | Microsemi |
1N5968 | Diode Zener Single 5.6V 5% 5W 2-Pin Case E | New Jersey Semiconductor |
1N5968US | 5 WATT ZENER DIODES | Compensated Deuices Incorporated |