DataSheet.jp

5KP40A の電気的特性と機能

5KP40AのメーカーはLittelfuseです、この部品の機能は「Diode ( Transient Voltage Suppression )」です。


製品の詳細 ( Datasheet PDF )

部品番号 5KP40A
部品説明 Diode ( Transient Voltage Suppression )
メーカ Littelfuse
ロゴ Littelfuse ロゴ 




このページの下部にプレビューと5KP40Aダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

5KP40A Datasheet, 5KP40A PDF,ピン配置, 機能
5KP Series
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Peak Pulse Power Dissipation by
10/1000μs Test Waveform (Fig.2)
(Note 1)
Steady State Power Dissipation on
Infinite Heat Sink at TL=75ºC
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only (Note 3)
Operating Junction and Storage
Temperature Range
Typical Thermal Resistance
Junction to Lead
Typical Thermal Resistance
Junction to Ambient
Symbol
PPPM
PD
IFSM
VF
TJ, TSTG
RθJL
RθJA
Value
5000
8.0
400
3.5/5.0
-55 to 175
8.0
40
Unit
W
W
A
V
°C
°C/W
°C/W
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
Functional Diagram
Description
The 5KP Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
Features
• 5000W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Glass passivated chip
junction in P600 package
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
• Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact)
• E SD protection of data
lines in accordance with
IEC 61000-4-2
• E FT protection of data
lines in accordance with
IEC 61000-4-4
• Low incremental surge
resistance
TwyhpeicnaVl IBRR
less than
min>12V
2μA
• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• Vx(αBR(1T@:+TαeTmJT=pxVeB(rTRa@Jtu-2r25e5°C))
Coefficient, typical value
is 0.1%)
• Plastic package is
flammability rated V-0 per
Underwriters Laboratories
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
Applications
TVS devices are ideal for the protection of I/O interfaces,
cVoCCmbpuustearn, dinodtuhsetrriavlualnnedracbolnescuimrcueirtseluescetrdoninictealpepcloicmat,ions.
Additional Infomarion
Cathode
Bi-directional
Uni-directional
Anode
Datasheet
Resources
Samples
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15

1 Page





5KP40A pdf, ピン配列
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
I-V Curve Characteristics
Uni-directional
Bi-directional
Ipp
Vc VBR VR
IR VF
IT
V
Vc VBR VR
IT
IR
IR
IT
VR VBR Vc
V
Ipp
Ipp
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 - TVS Transients Clamping Waveform
Figure 2 - Peak Pulse Power Rating Curve
Voltage Transients
1000
TJ initial =Tamb
Voltage Across TVS
Current Through TVS
100 5kW at 10x1000µs, 25°C
10
Time
1
0.001
0.01 0.1
1
td-Pulse Width (ms)
10
continues on next page.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15


3Pages


5KP40A 電子部品, 半導体
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Part Numbering System
5KPxxx XX X
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A
CA
BUin-Di-Direircetciotinoanla(l5(%5%VBVRBVRoVlotaltgaegeToTloelrearnacnec)e)
VR VOLTAGE
SERIES CODE
Part Marking System
Cathode Band
(for Uni-directional
products only)
Littelfuse Logo
YYWW
5KPXXX
Trace Code Marking
YY:Year Code
WW: Week Code
Product Type
Packing Options
Part Number
5KPxxxXX
Component
Package
P600
Quantity
800
Packaging
Option
Packaging Specification
Tape & Reel EIA STD RS-296
5KPxxxXX-B
P600
100
BULK
Littelfuse Spec.
Tape and Reel Specification
2.56
(65.0)
0.394+/-0.020
(10.0+/-0.5)
13.0
(330.2)
3.0
(76.2)
2.75
(69.85)
0.68
(17.27)
Off Center
either side
0.028(0.7)
2.063+0.079/-0.039
(53.0+2.0/-1.0)
0.047
(1.2)
0.236
(6.0)
Dimensions are in
inches/mm
Recess Depth Max. 0.75 (19.05)
Direction of Feed
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ 5KP40A データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
5KP40

Zener Diode ( Rectifier )

Microsemi Corporation
Microsemi Corporation
5KP40

TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR

General Semiconductor
General Semiconductor
5KP40

5000 Watt Transient Voltage Suppressors 5.0 to 110 Volts

Micro Commercial Components
Micro Commercial Components
5KP40

GPP TRANSIENT VOLTAGE SUPPRESSOR

Rectron Semiconductor
Rectron Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap