|
|
8302のメーカーはIDTです、この部品の機能は「LVCMOS / LVTTL Fanout Buffer」です。 |
部品番号 | 8302 |
| |
部品説明 | LVCMOS / LVTTL Fanout Buffer | ||
メーカ | IDT | ||
ロゴ | |||
このページの下部にプレビューと8302ダウンロード(pdfファイル)リンクがあります。 Total 10 pages
Low Skew, 1-to-2
LVCMOS / LVTTL Fanout Buffer
8302
Data Sheet
GENERAL DESCRIPTION
The 8302 is a low skew, 1-to-2 LVCMOS/LVTTL Fanout
Buffer. The 8302 hasa single ended clock input. The
single endedclock input accepts LVCMOS or LVTTL
input levels. The 8302 features a pair of LVCMOS/
LVTTL outputs. The 8302 is characterized at full 3.3V for
input VDD,and mixed 3.3V and 2.5V for output operating
supply modes (VDDO). Guaranteed output and part-to-part
skew characteristics make the 8302 ideal for clock distribution
applications demanding well defined performance and
repeatibility.
FEATURES
• 2 LVCMOS / LVTTL outputs
• LVCMOS / LVTTL clock input accepts LVCMOS
or LVTTL input levels
• Maximum output frequency: 200MHz
• Output skew: 25ps (typical)
• Part-to-part skew: 250ps (typical)
• Small 8 lead SOIC package saves board space
• Full 3.3V or 3.3V core, 2.5V supply modes
• 0°C to 70°C ambient operating temperature
• Lead-Free package fully RoHS compliant
BLOCK DIAGRAM
CLK
Q0
Q1
©2016 Integrated Device Technology, Inc
PIN ASSIGNMENT
VDDO
VDD
CLK
GND
1
2
3
4
8 Q0
7 GND
6 VDDO
5 Q1
8302
8-Lead SOIC
3.8mm x 4.8mm, x 1.47mm package body
M Package
Top View
1 Revision D March 4, 2016
1 Page 8302 Data Sheet
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VDD
4.6V
Inputs, VI
-0.5V to VDD + 0.5 V
Outputs, VO
-0.5V to VDDO + 0.5V
Package Thermal Impedance, θJA 112.7°C/W (0 lfpm)
Storage Temperature, TSTG
-65°C to 150°C
NOTE: Stresses beyond those listed under Absolute
Maximum Ratings may cause permanent damage to the
device.These ratings are stress specifications only. Functional
operation of product at these conditions or any conditions
beyond those listed in the DC Characteristics or AC Charac-
teristics is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect product reliability.
TABLE 3A. POWER SUPPLY DC CHARACTERISTICS, VDD = VDDO = 3.3V±5%, TA = 0°C TO 70°C
Symbol
VDD
VDDO
IDD
IDDO
Parameter
Core Supply Voltage
Output Power Supply Voltage
Power Supply Current
Output Supply Current
Test Conditions
Minimum
3.135
3.135
Typical
3.3
3.3
Maximum
3.465
3.465
13
4
Units
V
V
mA
mA
TABLE 3B. LVCMOS / LVTTL DC CHARACTERISTICS, VDD = VDDO = 3.3V±5%, TA = 0°C TO 70°C
Symbol
VIH
VIL
I
IH
IIL
Parameter
Input High Voltage
Input Low Voltage
Input High Current
Input Low Current
CLK
CLK
VOH Output High Voltage
VOL Output Low Voltage
Test Conditions
V = V = 3.465V
DD IN
VDD = 3.465V, VIN = 0V
50Ω to VDDO/2
IOH = -100µA
50Ω to VDDO/2
IOL = 100µA
Minimum
2
-0.3
Typical
-5
2.6
2.9
Maximum
VDD + 0.3
0.8
150
0.5
0.2
Units
V
V
µA
µA
V
V
V
V
TABLE 4A. AC CHARACTERISTICS, VDD = VDDO = 3.3V±5%, TA = 0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum Units
fMAX
tpLH
tsk(o)
Output Frequency
Propagation Delay, Low-to-High; NOTE 1
Output Skew; NOTE 2, 4
ƒ ≤ 200MHz
200 MHz
1.9 2.35 2.8 ns
25 85 ps
tsk(pp) Part-to-Part Skew; NOTE 3, 4
250 800 ps
tR Output Rise Time
tF Output Fall Time
odc Output Duty Cycle
20% to 80%
20% to 80%
ƒ ≤ 133MHz
133MHz < ƒ ≤ 200MHz
300
300
45
40
800 ps
800 ps
55 %
60 %
Parameters measured at fMAX unless otherwise noted.
NOTE 1: Measured from V /2 of the input to V /2 of the output.
DD DDO
NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at VDDO/2.
NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages and with equal load
conditions. Using the same type of inputs on each device, the outputs are measured at VDDO/2.
NOTE 4: This parameter is defined in accordance with JEDEC Standard 65.
©2016 Integrated Device Technology, Inc
3
Revision D March 4, 2016
3Pages RELIABILITY INFORMATION
8302 Data Sheet
TABLE 5. θJAVS. AIR FLOW TABLE FOR 8 LEAD SOIC
θJA by Velocity (Linear Feet per Minute)
Single-Layer PCB, JEDEC Standard Test Boards
Multi-Layer PCB, JEDEC Standard Test Boards
0
153.3°C/W
112.7°C/W
200
128.5°C/W
103.3°C/W
500
115.5°C/W
97.1°C/W
NOTE: Most modern PCB designs use multi-layered boards. The data in the second row pertains to most designs.
TRANSISTOR COUNT
The transistor count for 8302 is: 322
©2016 Integrated Device Technology, Inc
6
Revision D March 4, 2016
6 Page | |||
ページ | 合計 : 10 ページ | ||
|
PDF ダウンロード | [ 8302 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
830 | SILICON 28V HYPERABRUPT VARACTOR DIODES | Zetex Semiconductors |
830-10-016-10-001 | PCB connectors 2.0 mm Single row / double row Solder tail | Precid-Dip Durtal SA |
830-10-016-20-001 | PCB connectors 2.0 mm Single row / double row Solder tail | Precid-Dip Durtal SA |
830-10-016-30-001 | PCB connectors 2.0 mm Single row / double row Surface mount | Precid-Dip Durtal SA |