|
|
AA057VG12のメーカーはMitsubishiです、この部品の機能は「VGA」です。 |
部品番号 | AA057VG12 |
| |
部品説明 | VGA | ||
メーカ | Mitsubishi | ||
ロゴ | |||
このページの下部にプレビューとAA057VG12ダウンロード(pdfファイル)リンクがあります。 Total 22 pages
TENTATIVE
All information in this technical data sheet is tentative
and subject to change without notice.
Preliminary
5.7”VGA
TECHNICAL SPECIFICATION
AA057VG12
MITSUBISHI ELECTRIC Corp.
MITSUBISHI Confidential
(1/22)
Date: Oct.18,’11
AA057VG12_02_00
1 Page 1. APPLICATION
This specification applies to color TFT-LCD module, AA057VG12.
These specification papers are the proprietary product of Mitsubishi Electric Corporation
(“MITSUBISHI) and include materials protected under copyright of MITSUBISHI. No part of this
document may be reproduced in any form or by any means without the express written permission
of MITSUBISHI.
MITSUBISHI does not assume any liability for infringement of patents, copyrights or other
intellectual property rights of third parties by or arising from use of a product specified in this
document. No license, express, implied or otherwise, is granted under any patents, copyrights or
other intellectual property rights of MITSUBISHI or of others.
MITSUBISHI classifies the usage of the TFT-LCD module as follows. Please confirm the usage
before using the product.
(1) Standard Usage
Computers, office equipment, factory automation equipment, test and measurement
equipment, communications, transportation equipment(automobiles, ships, trains, etc.),
provided, however, that operation is not influenced by TFT-LCD directly.
(2) Special Usage
Medical equipment, safety equipment, transportation equipment, provided, however, that
TFT-LCD is necessary to its operation.
(3) Specific Usage
Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control
systems, life support systems and any other equipment. MITSUBISHI should make a
contract that stipulate apportionment of responsibilities between MITSUBISHI and our
customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified
in this document. If customers intend to use the product for applications other than those specified
for “Standard Usage”, they should first contact MITSUBISHI sales representative for it's intended
use in writing.
MITSUBISHI has been making continuous effort to improve the reliability of its products.
Customers should implement sufficient reliability design of their application equipments such as
redundant system design, fail-safe functions, anti-failure features.
MITSUBISHI assumes no responsibility for any damage resulting from the use of the product that
does not comply with the instructions and the precautions specified in this document.
Please contact and consult a MITSUBISHI sales representative for any questions regarding this
product.
MITSUBISHI Confidential
(3/22)
AA057VG12_02_00
3Pages VCC-dip conditions:
1) When 2.4 V VCC < 3.0 V, td 10 ms
2) When VCC < 2.4 V
VCC-dip conditions should also follow the power and signals sequence.
VCC
td
*2) VCC = + 3.3 V, fH=31.5kHz, fV=60Hz, fCLK= 25MHz
Display image at typical power supply current value is 64-gray-bar pattern (6 bit), 480 line mode.
*3) Fuse
Parameter
Fuse Type Name
Supplier
Remark
VCC
FCC16162AB
Kamaya Electric Co., Ltd.
*)
*) The power supply capacity should be designed to be more than the fusing current.
(2) Backlight
ITEM
SYMBOL MIN. TYP. MAX. UNIT
Ta=25°C
Remarks
Input Voltage
VL 4.5 5.0 5.5 V
*4)
Input Current
IL -- 680 870 mA VL=5.0 V, VBRT=0 V
High
0.8VL
--
VL V
Backlight ON-OFF
BLEN
Low 0 -- 0.2VL V
ON
OFF
LED Life Time
LT 80,000 100,000 --
h
*1), *2)
*5), 0V: Max. Luminance
Light Dimming Control Voltage VBRT
0
-- 2.5 V 2.5V: Min Luminance
(Luminance:0)
*1) LED life time is defined as the time when the brightness becomes 50% of the initial value.
*2) The life time of the backlight depends on the ambient temperature. The life time will decrease
under high temperature.
*3) Comply with the LED power-on sequence of VLBLEN, VBRT, and LED power-off sequence of
BLEN, VBRTVL.
*4) Fuse
Parameter
Fuse Type Name
Supplier
Remark
VL TF16SN3.15T
KOA
*)
*) The power supply capacity should be designed to be more than the fusing current.
*5) In the dimming range of brightness ratio 020% flicker may be visible.
MITSUBISHI Confidential
(6/22)
AA057VG12_02_00
6 Page | |||
ページ | 合計 : 22 ページ | ||
|
PDF ダウンロード | [ AA057VG12 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
AA057VG12 | VGA | Mitsubishi |