DataSheet.jp

UT750UL の電気的特性と機能

UT750ULのメーカーはTripp Liteです、この部品の機能は「PowerVerter 120V 750W Utility/Work Truck 12VDC Inverter/Charger」です。


製品の詳細 ( Datasheet PDF )

部品番号 UT750UL
部品説明 PowerVerter 120V 750W Utility/Work Truck 12VDC Inverter/Charger
メーカ Tripp Lite
ロゴ Tripp Lite ロゴ 




このページの下部にプレビューとUT750ULダウンロード(pdfファイル)リンクがあります。

Total 4 pages

No Preview Available !

UT750UL Datasheet, UT750UL PDF,ピン配置, 機能
PowerVerter 120V 750W Utility/Work Truck 12VDC
Inverter/Charger, 2-NEMA 5-15R GFCI
MODEL NUMBER: UT750UL
Highlights
12V DC or 120VAC input;
120VAC output; 2 GFCI
protected outlets
750 watts continuous, 1125 watts
OverPower and 1500 watts
DoubleBoost inverter output
3 stage, 45A / 11A selectable wet
/ gel / AGM cell battery charger
Built-in Isobar® premium AC
surge protection and Auto
Transfer
Switching option for battery
backup / UPS operation
Meets OSHA requirements
Package Includes
UT750UL Inverter/Charger
Description
Tripp Lite UT750UL Utility Work Truck Inverter / Charger are the quiet alternative to gas generators with no
fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through
APSRM4 Remote
Instruction manual with warranty
information
premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated
charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged work site applications. Supplies up
to 750 watts of continuous 120V AC power from any 12V DC battery or automotive DC source. OverPower inverter output feature temporarily provides up to
150% of the continuous output for 1-60 minutes, and DoubleBoost inverter out put feature delivers up to 200% of continuous output for up to 10 seconds,
providing the extra power needed to start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power
passes through to connected equipment and the battery set is recharged via 3 stage selectable 11/45Amp charging system. In UPS mode, the APS system
responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC input
terminals is included for simple installation (user supplies batteries and cabling – see owners manual for recommendations). Passes sine wave utility or
generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable
large transformer design, with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high current
needs on startup. Included is the APSRM4 wired remote power switch with full status LED’s, which provides remote power inverter on/off switching and
continuous status information. The UT750UL supports an unlimited amount of runtime with user-supplied batteries.
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 125a should be positioned no more than 18" from the
UT750UL's battery in the positive line.
Features
16.6 millisecond automatic transfer between line and battery power supports UPS protection for equipment compatible with a one cycle transfer time
750W continuous AC output in inverter mode, 1500W continuous AC output in AC mode
DoubleBoost output supports momentary startup loads of up to 200% of the continuous rating for up to 10 seconds - OverPower output supports duration
overloads to 150% for 1-60 minutes under ideal battery and temperature conditions
3-stage selectable 11/45 Amp battery charger with adjustable settings for wet/gel/AGM battery types
2 NEMA 5-15R GFCI protected outlets pass 120V line power or inverter output through to connected equipment
3 position operating mode switch supports “AUTO” mode to enable automatic transfer between DC and AC modes, CHARGE ONLY to maintain a full
1/4

1 Page





UT750UL pdf, ピン配列
BATTERY
Expandable Battery Runtime
DC System Voltage (VDC)
Battery Pack Accessory (Optional)
Battery Charge
Expandable Runtime
Runtime is expandable with any number of user supplied wet or gel or AGM type Batteries.
12
98-121 sealed lead acid battery(optional)
11A / 45A (selectable)
Yes
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs
Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level
(7 levels reported) See manual for sequences
Switches
3 position on / off remote switch enables simple on / off power control plus "auto/ remote"
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating
450
PHYSICAL
Shipping Dimensions (hwd / in.)
Shipping Dimensions (hwd / cm)
Shipping Weight (lbs.)
Shipping Weight (kg)
Unit Dimensions (hwd / in.)
Unit Dimensions (hwd / cm)
Unit Weight (lbs.)
Unit Weight (kg)
Cooling Method
Material of Construction
Receptacle Color
Form Factors Supported
12.5 x 11 x 10.75
31.75 x 27.94 x 27.31
20.6
8.2
7 x 8.75 x 9
17.78 x 22.23 x 22.86
17.4
7.9
Multi-speed fan
Polycarbonate
White
Mounting slots enable permanent placement of inverter on any horizontal surface. (see manual for additional
mounting information)
ENVIRONMENTAL
Relative Humidity
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to
Battery Mode)
Low Voltage Transfer to Battery
Power
16.6 milliseconds (typical -compatible with many computers, servers and networking equipment-verify transfer time
compatibility loads for UPS applications)
In AC "auto" mode, inverter / charger switches to battery mode as line voltage drops to 75V (user adjustable to
85,95,105 - see manual)
3/4


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ UT750UL データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UT750UL

PowerVerter 120V 750W Utility/Work Truck 12VDC Inverter/Charger

Tripp Lite
Tripp Lite


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap