DataSheet.jp

5.0SMDJ30CA の電気的特性と機能

5.0SMDJ30CAのメーカーはLittelfuseです、この部品の機能は「Diode ( Transient Voltage Suppression )」です。


製品の詳細 ( Datasheet PDF )

部品番号 5.0SMDJ30CA
部品説明 Diode ( Transient Voltage Suppression )
メーカ Littelfuse
ロゴ Littelfuse ロゴ 




このページの下部にプレビューと5.0SMDJ30CAダウンロード(pdfファイル)リンクがあります。

Total 5 pages

No Preview Available !

5.0SMDJ30CA Datasheet, 5.0SMDJ30CA PDF,ピン配置, 機能
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
5.0SMDJ Series
RoHS Pb
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Peak Pulse Power Dissipation at
T(FAi=g2.15)O(NCobtey
10x1000µs waveform
1), (Note 2)
PPPM
Power Dissipation on infinite heat
sink at TA=50OC
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
Operating Junction and Storage
Temperature Range
PM(AV)
IFSM
VF
TJ, TSTG
Value
5000
6.5
300
5.0
-65 to 150
Unit
W
W
A
V
°C
Typical Thermal Resistance Junction
to Lead
RuJL
15 °C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
Description
The 5.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
• Halogen-Free
• Fast response time:
• RoHS compliant
• For surface mounted
applications to optimize
board space
typically less than 1.0ps
from 0V to BV min
• Excellent clamping
capability
• Low profile package
• Low incremental surge
• Built-in strain relief
resistance
• Typical maximum
temperature coefficient
aTybpoivceal2I2R Vless than 5µA
ΔVBR = 0.1% x VBR@25°C x ΔT
• Glass passivated chip
junction
• 5000W peak pulse power
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
• High Temperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plastic package has
Underwriters Laboratory
Flammability 94V-O
• Matte Tin Lead–free Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
CVCoCmbpuustaenr,dInodtuhsetrrivaul lannedraCbolencsiurcmueitrseulescetdroinniTcealepcpolimca,tions.
5.0SMDJ Series
1 ©2011 Littelfuse, Inc.
Revision: November 15, 2011, 16:49
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.

1 Page





5.0SMDJ30CA pdf, ピン配列
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 - Peak Pulse Power Rating Curve
1000
100
10
1
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
0.1
0.0000001 0.000001 0.00001 0.0001
td-Pulse Width (Sec.)
0.001
Figure 2 - Peak Pulse Power or Current Derating Curve
vs Initial Junction Temperature
100
80
60
40
20
0
0 25 50 75 100 125 150 175
Tj-Initial temperature (ºC)
Figure 3 - Pulse Waveform
150
100
50
tr=10µsec
Peak Value
IPPM
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
( )Half Value
IPPM
IPPM
2
10/1000µsec. Waveform
as defined by R.E.A
0
0
td
1.0
2.0
t-Time (ms)
3.0
4.0
Figure 4 - Typical Junction Capacitance
100000
10000
1000
100
10
1
1.0
Bi-directional V= OV
Uni-directional V= OV
Uni-directional @ VR
Bi-directional @ VR
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0
25 50 75 100 125 150 175
TA-Ambient Temperature (ºC)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
350
300
250
200
150
100
50
0
1
10
Number of Cycles at 60 Hz
100
5.0SMDJ Series
3 ©2011 Littelfuse, Inc.
Revision: November 15, 2011, 16:49
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.


3Pages





ページ 合計 : 5 ページ
 
PDF
ダウンロード
[ 5.0SMDJ30CA データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
5.0SMDJ30CA

Diode ( Transient Voltage Suppression )

Littelfuse
Littelfuse
5.0SMDJ30CA

Rating and Characteristic Curves 5.0SMDJ Series

LGE
LGE


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap