DataSheet.jp

5.0SMDJ43A データシート PDF ( 特性, スペック, ピン接続図 )

部品番号 5.0SMDJ43A
部品説明 Transient Voltage Suppression Diodes
メーカ Littelfuse
ロゴ Littelfuse ロゴ 

Total 5 pages
		

No Preview Available !

5.0SMDJ43A Datasheet, 5.0SMDJ43A PDF,ピン配置, 機能
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
5.0SMDJ Series
RoHS Pb
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Peak Pulse Power Dissipation at
T(FAi=g2.15)O(NCobtey
10x1000µs waveform
1), (Note 2)
PPPM
Power Dissipation on infinite heat
sink at TA=50OC
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
Operating Junction and Storage
Temperature Range
PM(AV)
IFSM
VF
TJ, TSTG
Value
5000
6.5
300
5.0
-65 to 150
Unit
W
W
A
V
°C
Typical Thermal Resistance Junction
to Lead
RuJL
15 °C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
Description
The 5.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
• Halogen-Free
• Fast response time:
• RoHS compliant
• For surface mounted
applications to optimize
board space
typically less than 1.0ps
from 0V to BV min
• Excellent clamping
capability
• Low profile package
• Low incremental surge
• Built-in strain relief
resistance
• Typical maximum
temperature coefficient
aTybpoivceal2I2R Vless than 5µA
ΔVBR = 0.1% x VBR@25°C x ΔT
• Glass passivated chip
junction
• 5000W peak pulse power
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
• High Temperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plastic package has
Underwriters Laboratory
Flammability 94V-O
• Matte Tin Lead–free Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
CVCoCmbpuustaenr,dInodtuhsetrrivaul lannedraCbolencsiurcmueitrseulescetdroinniTcealepcpolimca,tions.
5.0SMDJ Series
1 ©2011 Littelfuse, Inc.
Revision: November 15, 2011, 16:49
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.

1 Page





ページ 合計 : 5 ページ
PDF
ダウンロード
[ 5.0SMDJ43A.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
5.0SMDJ43A

There is a function of Rating and Characteristic Curves 5.0SMDJ Series.

LGE
LGE
5.0SMDJ43A

There is a function of Transient Voltage Suppression Diodes.

Littelfuse
Littelfuse
5.0SMDJ43CA

There is a function of Transient Voltage Suppression Diodes.

Littelfuse
Littelfuse
5.0SMDJ43CA

There is a function of Rating and Characteristic Curves 5.0SMDJ Series.

LGE
LGE

多くを見つけるデータシート

部品番号部品説明メーカ
82S129

The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.

NXP
NXP
D1695

This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.

NEC
NEC

www.DataSheet.jp    |   2018   |  メール    |   最新    |   Sitemap