|
|
PDF TLCY6800 Data sheet ( Hoja de datos )
| Número de pieza | TLCY6800 | |
| Descripción | Ultrabright LED | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TLCY6800 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.vishay.com
TLCR6800, TLCY6800
Vishay Semiconductors
Ultrabright LED, Ø 5 mm Untinted Non-Diffused Package
19224
DESCRIPTION
The TLC.68.. series is a clear, non-diffused 5 mm LED for
high end applications where supreme luminous intensity
required.
These lamps with clear untinted plastic case utilize the
highly developed ultrabright AlInGaP (AS).
The lens and the viewing angle is optimized to achieve best
performance of light output and visibility.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: 5 mm
• Product series: power
• Angle of half intensity: ± 4°
FEATURES
• Untinted non-diffused lens
• Utilizing ultrabright AllnGaP (AS)
• High luminous intensity
• High operating temperature: Tj (chip junction
temperature) up to 125 °C for AllnGaP devices
• Luminous intensity and color categorized for
each packing unit
• ESD-withstand voltage: Up to 2 kV according to
JESD22-A114-B
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Interior and exterior lighting
• Outdoor LED panels
• Instrumentation and front panel indicators
• Central high mounted stop lights (CHMSL) for motor
vehicles
• Replaces incandescent lamps
• Traffic signals
• Light guide design
PARTS TABLE
PART
COLOR
TLCR6800
TLCY6800
Red
Yellow
LUMINOUS INTENSITY
(mcd)
MIN. TYP. MAX.
7500 35 000 -
5750 25 000 -
at IF
(mA)
50
50
WAVELENGTH
(nm)
MIN. TYP. MAX.
611 616 622
585 590 597
at IF
(mA)
50
50
FORWARD VOLTAGE
(V)
MIN. TYP. MAX.
- 2.1 2.7
- 2.1 2.7
at IF
(mA)
50
50
TECHNOLOGY
AllnGaP on GaAs
AllnGaP on GaAs
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
TLCR6800, TLCY6800
PARAMETER
Reverse voltage (1)
DC forward current
Surge forward current
Power dissipation
Junction temperature
Operating temperature range
Storage temperature range
Soldering temperature
Thermal resistance junction/ambient
TEST CONDITION
Tamb 85 °C
tp 10 μs
t 5 s, 2 mm from body
SYMBOL
VR
IF
IFSM
PV
Tj
Tamb
Tstg
Tsd
RthJA
VALUE
5
50
1
135
125
- 40 to + 100
- 40 to + 100
260
300
Note
(1) Driving the LED in reverse direction is suitable for a short term application
UNIT
V
mA
A
mW
°C
°C
°C
°C
K/W
Rev. 1.1, 29-Apr-13
1 Document Number: 81157
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet TLCY6800.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TLCY6800 | Ultrabright LED | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |