|
|
Número de pieza | SPBTLE-RF | |
Descripción | Very low power module | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SPBTLE-RF (archivo pdf) en la parte inferior de esta página. Total 23 Páginas | ||
No Preview Available ! SPBTLE-RF
Very low power module for Bluetooth® Smart v4.1
Features
• Bluetooth v4.1 compliant
– Supports master and slave modes
– Multiple roles supported simultaneously
• Embedded Bluetooth low energy protocol stack
– GAP, GATT, SM, L2CAP, LL, RFPHY
• Bluetooth low energy profiles provided
separately
• Bluetooth radio performance:
– Embedded ST BlueNRG-MS
– Tx power: + 4 dBm
– Rx sensitivity: - 88 dBm
– Provides up to 92 dB link budget with
excellent link reliability
• Host interface
– SPI, IRQ, and RESET
– On-field stack upgrading available via SPI
• AES security co-processor
• Certification
– CE qualified
– FCC, IC modular approval certified
– BQE qualified
• On-board chip antenna
• Operating supply voltage: from 1.7 to 3.6 V
• Operating temperature range: -40 °C to 85 °C
Datasheet - production data
Applications
• Watches
• Fitness, wellness and sports
• Consumer medical
• Security/proximity
• Remote control
• Home and industrial automation
• Assisted living
• Mobile phone peripherals
• PC peripherals
Description
The SPBTLE-RF is an easy to use Bluetooth®
Smart master/slave network processor module,
compliant with Bluetooth v4.1. The SPBTLE-RF
B-SmarT module supports multiple roles
simultaneously, and can act at the same time as
Bluetooth Smart sensor and hub device.
The entire Bluetooth Smart stack and protocols
are embedded into SPBTLE-RF B-SmarT
module. The external host application processor,
where the application resides, is connected to the
SPBTLE-RF B-SmarT module through a standard
SPI interface.
The SPBTLE-RF B-SmarT module provides a
complete RF platform in a tiny form factor. Radio,
antenna, high frequency and LPO oscillators are
integrated to offer a certified solution to optimize
the time to market of the final applications.
The SPBTLE-RF can be powered directly with a
standard 3 V coin cell battery, a pair of AAA
batteries or any power source from 1.7 to 3.6 V.
March 2017
This is information on a product in full production.
DocID027851 Rev 7
1/23
www.st.com
1 page SPBTLE-RF
3 Software architecture
Software architecture
3.1 Bluetooth firmware implementation
Figure 2. SPBTLE-RF application block diagram
DocID027851 Rev 7
5/23
23
5 Page SPBTLE-RF
Hardware specifications
4.6 Mechanical dimensions
Figure 9. Mechanical dimensions
DocID027851 Rev 7
11/23
23
11 Page |
Páginas | Total 23 Páginas | |
PDF Descargar | [ Datasheet SPBTLE-RF.PDF ] |
Número de pieza | Descripción | Fabricantes |
SPBTLE-RF | Very low power module | STMicroelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |