DataSheet.es    


PDF ISL29008 Data sheet ( Hoja de datos )

Número de pieza ISL29008
Descripción Ambient Light Photo Detect IC
Fabricantes Intersil 
Logotipo Intersil Logotipo



Hay una vista previa y un enlace de descarga de ISL29008 (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! ISL29008 Hoja de datos, Descripción, Manual

Data Sheet
ISL29006, ISL29007, ISL29008
October 8, 2015
FN6282.2
Small, Low Power, Current-Output
Ambient Light Photo Detect IC
The ISL29006, ISL29007, and ISL29008 are light-to-current
silicon optical sensors combining a photodiode array and a
current amplifier on a single monolithic IC. The photodiode’s
spectral sensitivity approximates the human eye response
peaking at 550nm with virtually no infrared (IR) response.
Exposed to light, these light sensors give current outputs
that are linearly proportional to the light intensity. The output
of ISL29006 is configured as a current source, and the
output of ISL29007 is configured as a current sink. Both
ISL29006 and ISL29007 offer an EN pin that can be used for
a polling scheme to extend the battery life of portable
devices.
The ISL29008 has dual outputs simultaneously sinking and
sourcing current. With output currents at opposite polarity, it
can simultaneously control two light sources/drivers that
have incongruent illumination requirement depending on
ambient light conditions. For example, at bright ambient light
levels, display backpanels need more intensity while the
keyboard illumination needs to be dimmer, whereas at
darker ambient light levels, display backpanels need less
intensity while the keyboard illumination needs to be
brighter.
By connecting an external resistor from ISRC to GND or
from ISNK to VDD, the current output can be converted into
voltage output.
Housed in an ultra-compact 2mmx2.1mm ODFN clear
plastic package, this device is excellent for power saving
control function in cell phones, PDAs and other handheld
applications.
Features
• 0.5 lux to 10,000 lux range
• 1.8V to 3.6V supply range
• Low supply current (3.5µA @ 100 lux)
• Fast response time
• Close to human eye response
• IR Rejection
• Internal dark current compensation
• Lux to current source or/and sink
• Excellent output linearity of luminance
• 6 Ld ODFN: 2mmx2.1mmx0.7mm
• Pb-free (RoHS compliant)
Applications
• Display and keypad dimming for:
- Mobile devices: smart phone, PDA, GPS
- Computing devices: notebook PC, webpod
- Consumer devices: LCD-TV, digital picture frame, digital
camera
• Industrial and medical light sensing
Ordering Information
PART NUMBER
(Note)
TEMP.
RANGE
(°C)
PACKAGE
(Pb-free)
PKG.
DWG. #
ISL29006IROZ-T7*
-40 to +85 6 Ld ODFN
L6.2x2.1
ISL29007IROZ-T7*
(No longer available or
supported)
-40 to +85
6 Ld ODFN
L6.2x2.1
ISL29008IROZ-T7*
(No longer available or
supported)
-40 to +85
6 Ld ODFN
L6.2x2.1
ISL29006IROZ-EVALZ Evaluation Board
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets; molding compounds/die attach
materials and 100% matte tin plate - e3 termination finish, which is
RoHS compliant and compatible with both SnPb and Pb-free
soldering operations. Intersil Pb-free products are MSL classified at
Pb-free peak reflow temperatures that meet or exceed the Pb-free
requirements of IPC/JEDEC J STD-020.
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2008, 2010, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

1 page




ISL29008 pdf
ISL29006, ISL29007, ISL29008
Typical Performance Curves (Continued)
RADIATION PATTERN
LUMINOSITY
20° 10° 0°
30°
ANGLE 40°
50°
10° 20°
30°
40°
50°
60° 60°
70° 70°
80° 80°
90° 90°
0.2 0.4 0.6 0.8 1.0
RELATIVE SENSITIVITY
FIGURE 5. RADIATION PATTERN
400
380
360
340
VDD = 3V
FLUORESCENT LIGHT
320
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000
LIGHT INTENSITY (LUX)
FIGURE 6. OUTPUT CURRENT vs LIGHT INTENSITY
200 FLUORESCENT
180 INCANDESCENT
HALOGEN
160
140
120
HALOGEN
100
80 INCANDESCENT
60
FLUORESCENT
40
20
0
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LIGHT INTENSITY (LUX)
FIGURE 7. OUTPUT CURRENT vs LIGHT INTENSITY
20
18
FLUORESCENT
INCANDESCENT
16 HALOGEN
14
12
HALOGEN
10
8 INCANDESCENT
6
FLUORESCENT
4
2
0
0 100 200 300 400 500 600 700 800 900 1000
LIGHT INTENSITY (LUX)
FIGURE 8. OUTPUT CURRENT vs LIGHT INTENSITY
2.0
FLUORESCENT
1.8 INCANDESCENT
HALOGEN
1.6
1.4
1.2
1.0
0.8
0.6 HALOGEN
FLUORESCENT
0.4
0.2 INCANDESCENT
0
0 10 20 30 40 50 60 70 80 90 100
LIGHT INTENSITY (LUX)
FIGURE 9. OUTPUT CURRENT vs LIGHT INTENSITY
1.000
0.995
VDD = 3V
FLUORESCENT
0.990
0.985
0.980
0.975
0.970
0.965
10
100
1000
10000
LIGHT INTENSITY (LUX)
100000
FIGURE 10. RATIO OF SOURCE CURRENT AND SINK
CURRENT vs LIGHT INTENSITY
5 FN6282.2
October 8, 2015

5 Page





ISL29008 arduino
ISL29006, ISL29007, ISL29008
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make
sure that you have the latest revision.
DATE
REVISION
CHANGE
October 8, 2015
FN6282.2
Added Rev History beginning with Rev 2.
Added About Intersil Verbiage.
Updated Ordering Information on page 1
Updated POD L6.2X2.1 to most current version. Revision changes are as follows:
Changed Note 5 From: Tiebar shown (if present) is a non-functional feature.
To: Tiebar shown (if present) is a non-functional feature and maybe located on any of the 4 sides (or
ends).
Added "MAX 0.75" dimension to Side View
Added lead width of 6x0.30±0.05 and note 4 callout to bottom view
Increased the size of the pin 1 shaded area
Bottom View: Added dimension callouts for solder pad
Land Pattern: Added package outline and package outline dimensions
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
11 FN6282.2
October 8, 2015

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet ISL29008.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ISL29000Ambient Light Photo Detect ICIntersil Corporation
Intersil Corporation
ISL29001Ambient Light SensorIntersil Corporation
Intersil Corporation
ISL29002Light-to-Digital I2C SensorIntersil Corporation
Intersil Corporation
ISL29003Light-to-Digital Output SensorIntersil Corporation
Intersil Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar