|
|
PDF ISL76123 Data sheet ( Hoja de datos )
| Número de pieza | ISL76123 | |
| Descripción | SPDT Analog Switch | |
| Fabricantes | Intersil | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ISL76123 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
Automotive Single Supply, SPDT Analog Switch
ISL76123
The Intersil ISL76123 device is a small precision, bidirectional,
single-pole/double throw (SPDT) analog switch, designed to
operate from a single +2.7V to +12V supply. The device is
supplied in a 6 Ld SOT-23 package. Targeted applications
include automotive battery powered systems that can benefit
from the device’s low power consumption (5µW), low leakage
currents (3nA max), and fast switching speeds (tON = 28ns,
tOFF = 20ns). This device will often find use in infotainment
systems to “mux-in” additional functions to GPIO pins on SOCs.
The device ensures the switching function is always
break-before-make to help eliminate transient signal problems.
Its small package size alleviates board space limitations. The
part has been qualified for use in automotive applications
across an operating temperature range of -40°C to +105°C.
TABLE 1. FEATURES AT A GLANCE
ISL76123
SW 1/SW 2
SPDT or
2x1 MUX
3.3V rON
3.3V tON/tOFF
5V rON
5V tON/tOFF
12V rON
12V tON/tOFF
Package
42Ω
40ns/20ns
23Ω
28ns/20ns
15Ω
25ns/17ns
6 Ld SOT-23
Features
• Fully specified at 12V, 5V, and 3.3V supplies for 10%
tolerances
• ON-resistance (rON) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Ω
• rON matching between channels . . . . . . . . . . . . . . . . . . . . . . . <1Ω
• Low charge injection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5pC (Max)
• Single supply operation . . . . . . . . . . . . . . . . . . . . . . +2.7V to +12V
• Low power consumption (PD) . . . . . . . . . . . . . . . . . . . . . . . . <5µW
• Low leakage current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10nA
• Fast switching action
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28ns
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ns
• Guaranteed break-before-make switching
• Minimum 2000V ESD protection
• TTL, CMOS compatible
• Available in 6 Ld SOT-23 package
• Pb-free (RoHS compliant)
• AEC-Q100 qualified
Applications
• Audio and video switching
• General signal “mux-in” (where GPIO lines may be
constrained)
• Various building block control applications
- Filters
- Signal conditioning
- Integration reset circuits
August 15, 2014
FN8297.3
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2012-2014. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1 page  
ISL76123
Electrical Specifications - 3.3V Supply Test Conditions: V+ = +3.0V to +3.6V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 8),
unless otherwise specified. Boldface limits apply across the operating temperature range, -40°C to +105°C. (Continued)
PARAMETER
TEST CONDITIONS
TEMP
MIN
MAX
(°C) (Notes 9, 10) TYP (Notes 9, 10) UNITS
POWER SUPPLY CHARACTERISTICS
Positive Supply Current, I+
DIGITAL INPUT CHARACTERISTICS
V+ = 3.6V, VIN = 0V or V+, all channels on or off Full -1
-
1 µA
Input Voltage Low, VINL
Input Voltage High, VINH
Input Current, IINH, IINL
V+ = 3.6V, VIN = 0V or V+
Full -
- 0.8
V
Full 2.4
-
-
V
Full -1 - 1 µA
Electrical Specifications - 12V Supply Test Conditions: V+ = +10.8V to +13V, GND = 0V, VINH = 4V, VINL = 0.8V (Note 8),
unless otherwise specified. Boldface limits apply across the operating temperature range, -40°C to +105°C.
PARAMETER
TEST CONDITIONS
TEMP
MIN
MAX
(°C) (Notes 9, 10) TYP (Notes 9, 10) UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
ON-Resistance, rON
V+ = 10.8V, ICOM = 1.0mA, VNO or VNC = 10V
Full 0
- V+
+25 - 15 23
Full - 16 25
V
Ω
Ω
rON Matching Between Channels, rON V+ = 12V, ICOM = 1.0mA, VNO or VNC = 10V
+25 - 0.8 2
Full -
14
Ω
Ω
rON Flatness, RFLAT(ON)
V+ = 12V, ICOM = 1.0mA, VNO or VNC = 3V, 6V, 9V
(Note 11)
+25
Full
-
-
14
-6
Ω
Ω
NO or NC OFF Leakage Current, INO(OFF) or V+ = 13V, VCOM = 1V, 12V, VNO or VNC = 12V, 1V
INC(OFF)
+25 -3 0.01 3
Full -5 - 5
nA
nA
COM OFF Leakage Current, ICOM(OFF)
V+ = 13V, VCOM = 12V, 1V, VNO or VNC = 1V, 12V
+25 -3 0.01 3
Full -5 - 5
nA
nA
COM ON Leakage Current, ICOM(ON)
V = 13V, VCOM = 1V, 12V, or VNO or VNC = 1V, 12V or +25
-5
-
5
nA
floating
Full -12 - 12 nA
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
VNO or VNC = 10V, RL = 1kΩ, CL = 35pF, VIN = 0V to 4V +25 - 25 -
Full - 35 -
ns
ns
Turn-OFF Time, tOFF
VNO or VNC = 10V, RL = 1kΩ, CL = 35pF, VIN = 0V to 4V +25 - 17 -
Full - 26 -
ns
ns
Break-Before-Make Time Delay, tD
Charge Injection, Q
OFF Isolation
Crosstalk (Channel-to-Channel)
Power Supply Rejection Ratio
NO or NC OFF Capacitance, COFF
COM OFF Capacitance, CCOM(OFF)
COM ON Capacitance, CCOM(ON)
POWER SUPPLY CHARACTERISTICS
RL = 300Ω, CL = 35pF, VNO or VNC = 10V, VIN = 0V to 4V Full
CL = 1.0nF, VG = 0V, RG = 0Ω
+25
RL = 50Ω, CL = 5pF, f = 1MHz
+25
RL = 50Ω, CL = 5pF, f = 1MHz
+25
RL = 50Ω, CL = 5pF, f = 1MHz
+25
f = 1MHz, VNO or VNC = VCOM = 0V
+25
f = 1MHz, VNO or VNC = VCOM = 0V
+25
f = 1MHz, VNO or VNC = VCOM = 0V (see Figure 7)
+25
-2-
-5-
- 76 -
- -105 -
- 63 -
-8-
-8-
- 28 -
ns
pC
dB
dB
dB
pF
pF
pF
Positive Supply Current, I+
V+ = 13V, VIN = 0V or V+, all channels on or off
Full -1 - 1 µA
Submit Document Feedback
5
FN8297.3
August 15, 2014
5 Page 
ISL76123
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you
have the latest revision.
DATE
REVISION
CHANGE
August 15, 2014
FN8297.3
Page 3 - Changed Charged Device Model from:
Charged Device Model (Tested per JESD22-C101)
to:
Charged Device Model (Tested per AEC-Q100-11)
December 23, 2013
FN8297.2
Page 11
- 2nd line of the disclaimer changed from:
"Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted"
to:
"Intersil Automotive Qualified products are manufactured, assembled and tested utilizing TS16949 quality
systems as noted"
September 28, 2012
FN8297.1
Initial Release.
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
For additional products, see www.intersil.com/en/products.html
Intersil Automotive Qualified products are manufactured, assembled and tested utilizing TS16949 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback 11
FN8297.3
August 15, 2014
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet ISL76123.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ISL76120 | Automotive Grade USB 2.0 High/Full Speed Multiplexer | Intersil |
| ISL76123 | SPDT Analog Switch | Intersil |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |