DataSheet.jp

ISL8200MM PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 ISL8200MM
部品説明 Complete Current Share 10A DC/DC Power Module
メーカ Intersil
ロゴ Intersil ロゴ 



Total 24 pages
		

No Preview Available !

ISL8200MM Datasheet, ISL8200MM PDF,ピン配置, 機能
NOT RECOMMENDED FOR NEW DESIGNS
RECOMMENDED REPLACEMENT PART
ISL8200AM
DATASHEET
Complete Current Share 10A DC/DC Power Module
ISL8200MM
The ISL8200MMREP is a simple and easy to use high power,
current-sharing DC/DC power module for
Datacom/Telecom/FPGA power hungry applications. All that is
needed is the ISL8200MMREP, a few passive components and
one VOUT setting resistor to have a complete 10A design ready
for market.
The ease of use virtually eliminates the design and
manufacturing risks while dramatically improving time to
market.
Need more output current? Just simply parallel up to six
ISL8200MMREP modules to scale up to a 60A solution (see
Figure 6 on page 10).
The simplicity of the ISL8200MMREP is in its “Off The Shelf”,
unassisted implementation. Patented current sharing in multi-
phase operation greatly reduces ripple currents, BOM cost and
complexity. For example, parallel 2 for 20A and up to 6 for 60A.
The output voltage can be precisely regulated to as low as 0.6V
with ±1% output voltage regulation over line, load, and
temperature variations.
The ISL8200MMREP’s thermally enhanced, compact QFN
package, operates at full load and over-temperature, without
requiring forced air cooling. It's so thin it can even fit on the back
side of the PCB. Easy access to all pins with few external
components, reduces the PCB design to a component layer and a
simple ground layer.
Features
• Specifications per DLA VID V62/10608
• Full mil-temp electrical performance from -55°C to +125°C
• Full traceability through assembly and test by date/trace code
assignment
• Enhanced process change notification
• Enhanced obsolescence management
• Complete switch mode power supply in one package
• Patented current share architecture reduces layout sensitivity
when modules are paralleled
• Programmable phase shift (1, 2, 3, 4, and 6 phase)
• Extremely low profile (2.2mm height)
• Input voltage range +3.0V to +20V at 10A, current share up to
60A
• A Single resistor sets VOUT from +0.6V to +6V
• Output overvoltage, overcurrent and over-temperature, built-in
protection and undervoltage indication
Applications
• Servers, telecom and datacom applications
• Industrial and medical equipment
• Point of load regulation
Related Literature
• iSim Model - (See Product Information page ISL8200MM)
Complete Functional Schematic
VIN RANGE
4.5V TO 20V
VIN
PVIN
VEN EN
FF
VOUT
ISL8200MMREP
Power Module
VOUT_SET
VSEN_REM-
VOUT RANGE
0.6V TO 6.0V
RSET
ISHARE
PGND1
10 F
5k
FIGURE 1. COMPLETE 10A DESIGN, JUST SELECT RSET FOR THE
DESIRED VOUT
ISL8200MMREP Package
2.2mm
15mm
15mm
FIGURE 2. THE 2.2mm HEIGHT IS IDEAL FOR THE BACKSIDE OF
PCBS WHEN SPACE AND HEIGHT IS A PREMIUM
March 15, 2013
FN7690.2
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2010, 2011, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

1 Page





ページ 合計 : 24 ページ
PDF
ダウンロード
[ ISL8200MM.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
ISL8200M

Complete Current Share 10A DC/DC Power Module

Intersil Corporation
Intersil Corporation
ISL8200MM

Complete Current Share 10A DC/DC Power Module

Intersil
Intersil

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap