DataSheet.jp

ISL91133 の電気的特性と機能

ISL91133のメーカーはIntersilです、この部品の機能は「High Efficiency 2.3A Boost Regulator」です。


製品の詳細 ( Datasheet PDF )

部品番号 ISL91133
部品説明 High Efficiency 2.3A Boost Regulator
メーカ Intersil
ロゴ Intersil ロゴ 




このページの下部にプレビューとISL91133ダウンロード(pdfファイル)リンクがあります。

Total 2 pages

No Preview Available !

ISL91133 Datasheet, ISL91133 PDF,ピン配置, 機能
DATASHEET
To request the full datasheet, please visit www.intersil.com/products/isl91133
High Efficiency 2.3A Boost Regulator With
Input-to-Output Bypass
ISL91133
The ISL91133 is an integrated boost switching regulator for
battery powered applications. The device provides a power
supply solution for products using a one cell Li-ion or Li-polymer
battery.
The device is capable of delivering up to 2.3A output current from
VIN = 2.5V and VOUT = 3.3V. The no load quiescent current is only
108μA in Boost Mode and 45μA in Forced Bypass Mode, which
significantly reduces the standby consumption.
The ISL91133 offers a Bypass Mode operation where the output
is directly connected to the input through a 38mΩ MOSFET to
allow a significantly lower dropout voltage. The Bypass Mode can
be entered by an external command, or by auto bypass. The
Forced Bypass Mode allows the output voltage to operate close
to the input voltage and improves the efficiency under these
conditions.
The ISL91133 is designed to support 6 fixed output voltages
ranging from 3.15V to 5V. A voltage select pin is available for
each output variant to scale up the output voltage by a small
offset to compensate the load transient droop.
The ISL91133 requires only an inductor and a few external
components to operate. The 2.5MHz switching frequency further
reduces the size of external components.
The ISL91133 is available in a 16 bump, 0.4mm pitch,
1.78mmx1.78mm WLCSP.
Features
• Input voltage range: 2.35V to 5.4V
• Output current: up to 2.3A (VIN = 2.5V, VOUT = 3.3V)
• Burst current up to 2.5A (VIN = 2.5V, VOUT = 3.3V, tON < 600μs,
T = 4.6ms)
• High efficiency: up to 96%
• 108μA quiescent current minimizes standby consumption in
Boost Mode, 45μA in Forced Bypass Mode
• 2.5MHz switching frequency minimizes external component
size
• Forced Bypass or Auto Bypass Modes with a 38mΩ switch
• PFM mode at light load currents
• Fully protected for overcurrent, over-temperature and
undervoltage
• Load disconnect when disabled
• Small 1.78mmx1.78mm WLCSP
Applications
• Smartphones and tablet PCs
• Wireless communication devices
• 2G/3G/4G RF power amplifiers
• USB OTG power source
Related Literature
• AN1958 “ISL91133 Evaluation Board User Guide”
FIGURE 1. TYPICAL APPLICATION
September 5, 2014
FN8680.0
1
100
98
96
94
92
90
88
86
84
82
80
78
76
74
72
70
0.001
4VIN
3VIN 2.7VIN
2.5VIN
0.01
0.1
1
IOUT (A)
FIGURE 2. EFFICIENCY vs LOAD CURRENT, VOUT = 3.3V
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC. 2014. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

1 Page







ページ 合計 : 2 ページ
 
PDF
ダウンロード
[ ISL91133 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
ISL9113

Low Input Voltage and High Efficiency Synchronous Boost Converter

Intersil Corporation
Intersil Corporation
ISL91132

High Efficiency 1.8A Boost Regulator

Intersil
Intersil
ISL91133

High Efficiency 2.3A Boost Regulator

Intersil
Intersil
ISL91134

High Efficiency 1.8A Boost Regulator

Intersil
Intersil


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap