|
|
PDF TL082 Data sheet ( Hoja de datos )
| Número de pieza | TL082 | |
| Descripción | GENERAL PURPOSE JFET INPUT OPERATIONAL AMPLIFIERS | |
| Fabricantes | Diodes | |
| Logotipo |  |
|
 1. - JFET Input Operational Amplifier  Hay una vista previa y un enlace de descarga de TL082 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Features
TL082
GENERAL PURPOSE JFET INPUT OPERATIONAL
AMPLIFIERS
General Description
• Low Power Consumption
• Wide Common-Mode and Differential Voltage Ranges
• Low Input Bias and Offset Currents
• Output Short-Circuit Protection
• Low Total Harmonic Distortion…0.003% Typ
• High Input Impedance…JFET-Input Stage
• Latch-Up-Free Operation
• High Slew Rate…13V/μs Typ
• Common-Mode Input Voltage Range Includes VCC+
• SOP-8L: Available in “Green” Molding Compound
(No Br, Sb)
• Lead Free Finish/ RoHS Compliant (Note 1)
The JFET-input operational amplifier family is designed to offer a
wider selection than any previously developed operational
amplifier family. Each of these JFET-input operational amplifiers
incorporates well-matched, high-voltage JFET and bipolar
transistors in a monolithic integrated circuit. The devices feature
high slew rates, low input bias and offset currents, and low
offset-voltage temperature coefficient.
Applications
• Active filters
• Audio pre-amps
• Sample and holds
• Peak detectors
Ordering Information
TL 082 S G - 13
Package
S : SOP-8L
Green
G : Green
Packing
13 : Tape & Reel
Device
TL082SG-13
Package
Code
S
Packaging
(Note 2)
SOP-8L
13” Tape and Reel
Quantity
Part Number Suffix
2500/Tape & Reel
-13
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
TL082 Rev. 1
1 of 11
www.diodes.com
JULY 2009
© Diodes Incorporated
1 page  
TL082
GENERAL PURPOSE JFET INPUT OPERATIONAL
AMPLIFIERS
Typical Performance Characteristics
Maximum Peak Output Voltage vs Supply Voltage
15.0
RL=10kΩ
12.5 TA=25℃
10.0
7.5
5.0
2.5
0.00
0 2 4 6 8 10 12 14 16 18
|Vcc±| Supply Voltage (V)
Maximum Peak Output Voltage vs Temperature
15.0
RL=10kΩ
12.5
10.0
RL=2kΩ
7.5
5.0
2.5 VCC±=±15V
See Figure 2
0.0
-50 -25 0 25 50 75
TA-Free Air Temperature (℃)
100
Maximum Peak Output Voltage vs Load Resistance
15.0
12.5
VCC±=±15V
TA=25℃
See Figure 2
10.0
7.5
5.0
2.5
0.00
100.01
0.2
0.4 0.710010 2
Load Resistance (kΩ)
4
7 1010000
15.0
12.5
10.0
Maximum Peak Output Voltage vs Frequency
VCC±=±15V
VCC±=±10V
RL=10kΩ
TA=25℃
See Figure 2
7.5
5.0 VCC±=±5V
2.5
0.0
100
1k 10k 100k 1M 10M
Frequency (Hz)
TL082 Rev. 1
5 of 11
www.diodes.com
JULY 2009
© Diodes Incorporated
5 Page 
TL082
GENERAL PURPOSE JFET INPUT OPERATIONAL
AMPLIFIERS
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2009, Diodes Incorporated
www.diodes.com
TL082 Rev. 1
11 of 11
www.diodes.com
JULY 2009
© Diodes Incorporated
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet TL082.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TL080 | JFET-Input Operational Amplifier |  Texas Instruments |
| TL081 | TL081 Wide Bandwidth JFET Input Operational Amplifier (Rev. A) | Texas Instruments |
| TL081 | GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIER |  STMicroelectronics |
| TL081 | WIDE BANDWIDTH JFET INPUT OPERATIONAL AMPLIFIER |  National Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |