|
|
Datasheet MCP664 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | MCP664 | Rail-to-Rail Output (RRO) Op Amps MCP660/1/2/3/4/5/9
60 MHz, 32 V/µs Rail-to-Rail Output (RRO) Op Amps
Features:
• Gain-Bandwidth Product: 60 MHz (typical) • Slew Rate: 32 V/µs (typical) • Noise: 6.8 nV/Hz (typical, at 1 MHz) • Short Circuit Current: 90 mA (typical) • Low Input Bias Current: 4 pA (typical) • Ease | Microchip | data |
MCP Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | MCP100 | Microcontroller Supervisory Circuit with Push-Pull Output MCP100/101
Microcontroller Supervisory Circuit with Push-Pull Output
FEATURES
• Holds microcontroller in reset until supply voltage reaches stable operating level • Resets microcontroller during power loss • Precision monitoring of 3V, 3.3V, and 5V systems • 7 voltage trip points available � Microchip Technology controller | | |
2 | MCP101 | Microcontroller Supervisory Circuit with Push-Pull Output MCP100/101
Microcontroller Supervisory Circuit with Push-Pull Output
FEATURES
• Holds microcontroller in reset until supply voltage reaches stable operating level • Resets microcontroller during power loss • Precision monitoring of 3V, 3.3V, and 5V systems • 7 voltage trip points available � Microchip Technology controller | | |
3 | MCP102 | Micropower Voltage Supervisors
MCP102/103/121/131
Micropower Voltage Supervisors
Features
• Ultra low supply current: 1.75 µA (steady state max.) • Precision monitoring options of: - 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38V and 4.63V • Resets microcontroller in a power-loss event • RST pin (Active-lo Microchip Technology data | | |
4 | MCP103 | Micropower Voltage Supervisors
MCP102/103/121/131
Micropower Voltage Supervisors
Features
• Ultra low supply current: 1.75 µA (steady state max.) • Precision monitoring options of: - 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38V and 4.63V • Resets microcontroller in a power-loss event • RST pin (Active-lo Microchip Technology data | | |
5 | MCP111 | Micropower Voltage Detector MCP111/112
Micropower Voltage Detector
Features
• Ultra-Low Supply Current: 1.75 µA (Max.) • Precision Monitoring Options Of:
- 1.90V, 2.32V, 2.63V, 2.90V, 2.93V, 3.08V, 4.38V and 4.63V
• Resets Microcontroller in a Power-Loss Event • Active-Low VOUT Pin:
- MCP111 Active-Low, Open-Drain - Microchip Technology detector | | |
6 | MCP112 | Micropower Voltage Detector MCP111/112
Micropower Voltage Detector
Features
• Ultra-Low Supply Current: 1.75 µA (Max.) • Precision Monitoring Options Of:
- 1.90V, 2.32V, 2.63V, 2.90V, 2.93V, 3.08V, 4.38V and 4.63V
• Resets Microcontroller in a Power-Loss Event • Active-Low VOUT Pin:
- MCP111 Active-Low, Open-Drain - Microchip detector | | |
7 | MCP120 | (MCP120 / MCP130) Microcontroller Supervisory Circuit with Open Drain Output MCP120/130
Microcontroller Supervisory Circuit with Open Drain Output
FEATURES
• Holds microcontroller in reset until supply voltage reaches stable operating level • Resets microcontroller during power loss • Precision monitoring of 3V, 3.3V and 5V systems • 7 voltage trip points available � Microchip Technology controller | |
Esta página es del resultado de búsqueda del MCP664. Si pulsa el resultado de búsqueda de MCP664 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |