DataSheet.jp

DM1AA-SF-PEJ82 の電気的特性と機能

DM1AA-SF-PEJ82のメーカーはHirose Electricです、この部品の機能は「SD Memory Card Connectors」です。


製品の詳細 ( Datasheet PDF )

部品番号 DM1AA-SF-PEJ82
部品説明 SD Memory Card Connectors
メーカ Hirose Electric
ロゴ Hirose Electric ロゴ 




このページの下部にプレビューとDM1AA-SF-PEJ82ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

DM1AA-SF-PEJ82 Datasheet, DM1AA-SF-PEJ82 PDF,ピン配置, 機能
SD Memory Card Connectors
DM1 Series
Withstands higher force of card insertion.
Card
Standard type
Metal cover extends over the back of the connector.
Features
1. Withstands higher force of card insertion
Metal cover extends over the back of the connector
allowing it to withstand force of up to 400N (static load)
when dropped or accidentally hit. (Fig.1)
2. No damage to the card when accidentally
pulled-out
The connectors will release the card when a moderate
pull-out force of about 4N is applied. There will be no
damage to the lock components and all connector
functions will not be affected. (Fig.2)
3. Accidental card fall-out prevention
Built-in lock feature holds the card securely in place.
(Fig.3)
4. Reliable Card Insertion and Withdrawal
Built-in Push-in / Push-out ejection mechanism assures
simple and reliable card insertion and withdrawal.
5. Designed to accept Secure Digital I/O card
(Built-in Ground Contact)
The connector allows use of various expansion
modules, including the Bluetooth communication
modules.
Card
Reverse type
Metal cover extends over the back of the connector.
Fig.1
No damage to the card when
accidentally pulled-out.
Accidental card
fall-out prevention
Fig.2
Fig.3
C39

1 Page





DM1AA-SF-PEJ82 pdf, ピン配列
Standard type
Part No.
DM1AA-SF-PEJ(82)
HRS No.
609-0004-8 82
1
t=0.2,W=0.6
1 CL
28
13.2
9.75
8.05
15
5.625 P2.5
1
2.9
BPCB mounting pattern
4.125±0.05
1.7±0.05
1.35±0.05
2
+0.1
0
25.4±0.05
22.4±0.05
15±0.05
P=2.5±0.05
9-1.1±0.05
1.6±0.05
2
+0.1
0
2
+0.1
0
2
Card detection switch
2
Write protection switch
1.2±0.05
No.4
No.2 No.3 No.5
No.1
No.9
No.6
No.7
No.8
1 CL
1 24.15 (Card slot dimension)
1 CL
2-Ø1.2
22.4
1 CL
1 CLindicates the center line of card slot.
Card detection switch
Write protection switch
When card When card When card When card is inserted
is ejected is inserted is ejected WRITE PROTECT WRITE ENABLE
OPEN
CLOSE
OPEN
OPEN
CLOSE
Weight:2.2g
BCard insertion/withdrawal dimensions
SD Card
Card pushed-in for insertion
SD Card
Card fully inserted
SD Card
Card ejected
(Card ejected dimension)
C41


3Pages


DM1AA-SF-PEJ82 電子部品, 半導体
BRecommended Temperature Profile
(ç) HRS test condition
250
Peak : 250ç MAX
Solder method : Reflow, IR/hot air
230ç min.
Environment
: Room air
200
50
seconds
200ç Soldering
150 150ç
100 90 to 120 seconds
Preheating
50
Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s
Part Number:M705-GRN360-K2-V)
Test board
: Glass epoxy 60mm∞100mm∞1.0mm thick
Metal mask
: 0.15mm thick
Number of reflow cycles : 2cycles max.
Time (Seconds)
The temperature profiles shown are based on the above
conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume / thickness and board
size / thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
C44
Powered by TCPDF (www.tcpdf.org)

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ DM1AA-SF-PEJ82 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
DM1AA-SF-PEJ82

SD Memory Card Connectors

Hirose Electric
Hirose Electric


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap